Professional Documents
Culture Documents
ILL Technical Book - 3180 Deming Pump
ILL Technical Book - 3180 Deming Pump
1
ease of installation
& maintenance
FIG. 3180 Series
Single-stage centrifugal
Industrial Process Pumps
Install like a valve Capacities to 1000 gpm
Mount in the pipeline Heads to 400 ft.
Support on pipe or Temperatures to 350°F
Pressures to 350 psig
foundation. . . Save
space - save time
STANDARD MOTORS
METALLURGY
SELF-ALIGNING SHAFT
Pump liquid ends are available in any
PULL-OUT MAINTENANCE mechanable metal. Your Crane repre-
ENCLOSED IMPELLER sentative will assist you in selection of
proper metallurgy. Available alloys
WORTHINGTON offers you a include:
broad line of industrial process Ductile (Nodular) iron
Bronze
pumps of the proven cost saving
Cast Steel
in-line design. these versatile Martensitic chrome steel
pumps efficiently handle a wide Austenitic stainless steel
range of corrosive and non- High alloy stainless
corrosive liquids from water to Nickel alloys
hydrocarbons. You can apply
them with confidence.
HOME MENU
2
standard construction MOTOR-STANDARD C-FLANGE
VAA-E, VAB-E,
VA05-E, VA10-E,
VA50-E, VA60-E,
VA70-E
CONSTRUCTION
PROTECTED SHAFT
One-piece shaft assures sustained positive
alignment of complete pump-motor rotating
element, eliminates couplings, minimizes
shsaft deflection. Shaft sleeve hook-type VA20-E, VA30-E,
free to expand with temperature variation, VA40-E, VA80-E,
CONSTRUCTION
extends through gland. Sleeve keyed to
shaft. Shaft is isolated from contact with
liquid by sleeve and Teflon® O-ring and flat
gaskets.
1 Casing
2 Impeller
7 Casing Wear Ring 26 Impeller Screw 40 Deflector 212 Cap Screw 264 Pipe Plug
8 Impeller Wear Rings (opt) 27 Packing Box Wear Ring 71 Adapter 216 Pipe Screw 270 Impeller Washer
11 Packing Box Cover 29 Lantern Ring 73 Casing Gasket 219 Cap Screw 272 Impeller Screw-O-Ring
13 Packing 30 Impeller Washer Gasket 206 Split Gland Clip 228 Motor 281 Gland Stud
14 Shaft Sleeve 32 Impeller Key 208 Pipe Plug 239 Stud 287 Jack Screw
17 Split Gland 38 Shaft Gasket 210 Hex Nut 249 Hex Nut 297 Pipe Plug
HOME MENU
3
outstanding features
TYPICAL SEAL ARRANGEMENTS
wide
application
Versatile Worthington In-Line
pumps are designed for use in a
broad range of industries and
applications:
- Chemical
Worthington In-Line circulates water where the pipe is. Compare
- Petrochemical Petroleum Coal this mounting with cost of floor mounted horizontal pumps.
- Fiber
- Pulp and Paper
- Food and Beverage
- Pharmaceutical Fats and Oils
- Soap
- Paint
- Automotive
- Primary Metal
- Rubber
- Metal
- Fabrication
- Utilty
Worthington In-Line pump handling petroleum. Note simple pipe
supports for piping and pump.
DEMING PUMPS
dimensions
PUMP DATA
*5 1/16 on 3182
HOME MENU
performance
DESIGNATION-INCHES:
Suction x Discharge x Impeller Diameter (maximum)
VAA-E 11/2 x 1 x 6 VA05-E 2 x 1 x 9 1/ 2 VA20-E 3 x 11/2 x 12
VAB-E 3 x 11/2 x 6 VA50-E 3 x 11/2 x 91/2 VA30-E 3 x 2 x 12
VA60-E 3 x 11/2 x 91/2 VA40-E 4 x 3 x 12
VAIO-E 3 x 2 x 71/2 VA70-E 4 x 3 x 9 1/ 2 x VA80-E 6 x 4 x 12
HOME MENU