Professional Documents
Culture Documents
Boot Partition: Chapter 5-Review 1
Boot Partition: Chapter 5-Review 1
Boot Partition: Chapter 5-Review 1
2. When a PC is corrupted while copying data to a USB formatted with FAT32, which feature is used
to limit the data failure?
Select one:
Cannot limit the issue.
Encryption
Permission
Journaling
Compression
5. What function (F) must be used after pressing the power button to boot into the UEFI on the
Surface Laptop 3?
Answer: 4
6. If the hard disk size is 4 TB, what type of partition table must be used?
Select one:
GUID Partition Table (GPT)
Master Boot Record (MBR)
7. What RAID types can speed up the write speed?
Select one or more:
RAID 5
RAID 0
RAID 3
RAID 1
8. How many disks can be failed at the same time if RAID 15 like the figure below is installed?
Answer: 4
9. When copy data from hard disk 1 to hard disk 2, where does the data will be temporarily placed
before storing it on hard disk 2.
Select one:
RAM
Flash
CPU
USB
ROM
10. How many disks can be failed at the same time if RAID 6 is installed?
Answer: 2
CHAPTER 5- REVIEW 2
1. What is the difference between NAS and SAN?
Select one or more:
NAS runs OS, but SAN doesn't.
SAN runs OS, but NAS doesn't.
Access to NAS using the common network file sharing protocol (e.g., SMB), SAN doesn't.
Access to SAN using the common network file sharing protocol (e.g., SMB), NAS doesn't.
3. What configuration must be enabled to support servers connect to different SANs to provide fault
tolerance?
Answer: Multipath Input output (MPIO)
4. Can we boot the system without installing a hard disk (on the same system)?
Select one:
True
False
5. While using storage service through SAN, can we further implement RAID on our system (i.e.,
software RAID)?
Select one:
True
False
CHAPTER 5- REVIEW 3
1. How is the data written on the HDD?
Select one:
The system will write the data on the end of the disk. Then, the system will find the available
space and move the data later for speed.
The system will write the data on the end of the previously used area to make sure the space is
always enough.
The system will find the area which is enough space and write the data on there.
The system just writes the data on the available area. If not enough space, the system will
write the remaining data on the next available area.
2. Can the Data Deduplication feature check the duplicate files which are different names?
Select one:
True
False
CHAPTER 6- REVIEW
1. Know that, DNS server of the forest domain1.local and DNS server of the forest domain2.local only
config the Stub DNS to each other. If DNS server of the forest domain1.local receive the request to
resolve the "google.com" which is not in the cache, what the DNS server of the forest domain1.local
will do next?
Select one:
Send the query to the ISP DNS server.
Drop the query and return an error to the client.
Forward the query to the DNS server of the forest domain2.local.
Send the query to the Root-hint.
5. When a client requests to resolve the domain name to the DNS server, what type of query will be
sent from the client?
Select one:
Recursive query
Request query
DNS query
Iterative query
Resolve query
7. At the forwarder DNS server (e.g., ISP DNS server), if it cannot resolve the domain name to IP
address, it will send the query to:
Select one:
Root-hint
To the forwarding DNS server
To organization DNS server
It will not send the query anywhere, it will return the error to the client.
8. The client (IP address of 172.16.1.1) sends the query to resolve "abc.com" (has two records of
172.16.100.1 and 192.168.100.1) to the DNS server performing load balancing. What IP address
will be contained in the DNS reply?
Select one:
172.16.100.1
Both IP addresses
Random IP address based on a "round robin" mechanism.
192.168.100.1
9. What is the FQDN of PC1 if PC1 belongs to the domain2 domain and the domain2 domain is the
child domain of the domain1.local domain?
Answer: pc1.domain2.domain1.local