Professional Documents
Culture Documents
Acon (SMD) RVN Series
Acon (SMD) RVN Series
Leakage current Less than I≤0.002CRUR(μA)or 0.4 μA Whichever is greater (after 2 minutes)
UR(V) 6.3 10 16 25 35 50
Temperature characteristics
Z-25℃/Z+20℃ 4 3 2 2 2 2
impedance radio(120Hz)
Z-40℃/Z+20℃ 10 8 6 4 3 3
After applying rated voltage for 1000 hours at +105℃ and then resumed 16 hours, the capacitor
shall meet the following limits.
Load life Capacitance change ≤±30% of initial measured value
Leakage ≤Initial specified value
Dissipation factor ≤300% of initial specified value
After applying rated voltage for 500 hours at +105℃ and then resumed 16 hours, the capacitor
shall meet the following limits.
Shelf life Capacitance change ≤±30% of initial measured value
Leakage ≤200% initial specified value
Dissipation factor ±300% of initial specified value
The capacitors shall be kept on the hot plate maintained at 250℃ for 30 seconds. After removing
form the hot plate and restored at room temperature, them meet the following requirement.
Capacitance change ≤±10% of initial measured value
Resistance to soldering heat Leakage ≤Initial specified value
Dissipation factor ≤Initial specified value
131
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
RVN series
ФD A B C E L H
4.0 1.8 4.3 4.3 1.0 5.4
5.0 2.1 5.3 5.3 1.3 5.4
0.5~0.8
6.3 2.4 6.6 6.6 2.1 5.4
6.3 2.4 6.6 6.6 2.1 7.7
Nominal capacitance, rated voltage, rated ripple current and case size table(mm)
V 6.3 10 16 25 35 50
132