Derating Curve - LUNA2000 Smart String ESS

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

LUNA2000 Smart String ESS Derating Curve

(Pan-European Version)

Issue 1.0
Date 2021-01-30

HUAWEI TECHNOLOGIES CO., LTD.


LUNA2000 Smart String ESS Derating Curve

Power Derating - Ambient Temperature Curve

LUNA2000 Smart String ESS (Energy Storage System) power derating-ambient


temperature curve:

LUNA2000-5/10/15-S0 Power Derating Curve


6000

LUNA2000-10-S0
5000
Charge Power(W)

LUNA2000-15-S0
4000
LUNA2000-5-S0
3000

2000

1000

0
-30 -20 -10 0 10 20 30 40 50 60
Ambient Temperature ℃

ESS voltage: 850 V DC

Ambient
-20 0 15 20 30 35 40 45 50 55
Temperature (°C)
LUNA2000-5-S0
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.5 0.5
(kW)
LUNA2000-10-S0
5 5 5 5 5 5 5 5 1 1
(kW)
LUNA2000-15-S0
5 5 5 5 5 5 5 5 1.5 1.5
(kW)

V1.00 (2021-01-30) 2
LUNA2000 Smart String ESS Derating Curve

LUNA2000-5/10/15-S0 Power Derating Curve


6000

5000 LUNA2000-10-S0
Discharge Power(W)

LUNA2000-15-S0
4000
LUNA2000-5-S0
3000

2000

1000

0
-30 -20 -10 0 10 20 30 40 50 60

Ambient Temperature℃

ESS voltage: 850 V DC

Ambient
temperature -20 -10 0 15 20 30 35 40 45 50 55
(°C)
LUNA2000-5-S0
1 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1 0.5
(kW)
LUNA2000-10-
S0 2 5 5 5 5 5 5 5 5 2 1
(kW)
LUNA2000-15-
S0 3 5 5 5 5 5 5 5 5 3 1.5
(kW)

Remarks:

1. The ESS has a built-in heating component. When the lowest temperature of the
electrochemical cell is less than or equal to 8°C, the built-in heater of the LUNA2000-5-E0
starts to heat the electrochemical cell. The foregoing curve is a charge-discharge power
curve after heating.

2. High temperature test conditions: The initial temperature of the energy storage system is
25°C. Wait for 2 hours at the ambient temperature shown in the preceding figure and then
perform the test.

3. Applicable to the full cycle test of one charge and discharge.

V1.00 (2021-01-30) 3
LUNA2000 Smart String ESS Derating Curve

4. The electrochemical cell heat capacity in the energy storage system is large. Therefore,
repeated charging and discharging cycles will cause the cell temperature to accumulate. To
avoid the impact of protection shutdown in this scenario, the absolute electrochemical cell
temperature is involved in the system temperature derating control.

V1.00 (2021-01-30) 4
LUNA2000 Smart String ESS Derating Curve

Power-DC Input Voltage Curve

LUNA2000-5/10/15-S0 power-DC input voltage curve:

LUNA2000-5/10/15-S0 Voltage-Power Derating Curve


6.00

5.00

4.00
Power (kW)

3.00

2.00

1.00

0.00
300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000
Voltage(Vdc)

Note: The test temperature is 25°C.

V1.00 (2021-01-30) 5
LUNA2000 Smart String ESS Derating Curve

Power Derating Curve VS Altitude

LUNA2000 Altitude-Temperature Curve


1.20
Normalized Power Factor (k-Pn)

1.00

0.80

0.60

0.40

0.20

0.00
0 500 1000 1500 2000 2500 3000 3500 4000 4500
Altitude (m)

Operating Altitude: 0 to 4000 m

Operating under 0~2000 m can output rated power without derating. When
altitude>2000m, the working temperature of LUNA2000 should derate by altitude, and it
derates in accordance with 1%/100m.

V1.00 (2021-01-30) 6

You might also like