Professional Documents
Culture Documents
Purlins Design Analysis
Purlins Design Analysis
PAGE NO. 1
****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.00.00.15 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= JUN 11, 2023 *
* Time= 21:15: 9 *
* *
* Licensed to: only @ ::LAVTeam:: (R) *
****************************************************
1. STAAD SPACE
INPUT FILE: C:\Users\Secret\DOCUME~1\PURLIN~1\Purlins Design.STD
2. START JOB INFORMATION
3. END JOB INFORMATION
4. INPUT WIDTH 79
5. UNIT METER KN
6. JOINT COORDINATES
7. 1 0 0 0; 2 0.8 0 0; 3 2.8 0 0; 4 4.8 0 0; 5 6.8 0 0; 6 8.8 0 0
8. 7 10.8 0 0; 8 12.8 0 0; 9 14.62 0 0
9. MEMBER INCIDENCES
10. 1 1 2; 2 2 3; 3 3 4; 4 4 5; 5 5 6; 6 6 7; 7 7 8; 8 8 9
11. DEFINE MATERIAL START
12. ISOTROPIC STEEL
13. E 2.05E+08
14. POISSON 0.3
15. DENSITY 76.8195
16. ALPHA 1.2E-05
17. DAMP 0.03
18. TYPE STEEL
19. STRENGTH RY 1.5 RT 1.2
20. END DEFINE MATERIAL
21. MEMBER PROPERTY AMERICAN
22. 1 TO 8 TABLE ST C4X6
23. CONSTANTS
24. BETA 8.53 ALL
25. MATERIAL STEEL ALL
26. SUPPORTS
27. 2 TO 8 ENFORCED BUT MY MZ
28. LOAD 1 LOADTYPE DEAD TITLE DL1
29. SELFWEIGHT Y -1 LIST ALL
30. LOAD 2 LOADTYPE DEAD TITLE DL2
31. MEMBER LOAD
32. 1 TO 8 UNI GY -0.133
33. LOAD 3 LOADTYPE LIVE TITLE LL
34. MEMBER LOAD
35. 1 TO 8 UNI Y -1.68
36. PERFORM ANALYSIS PRINT ALL
P R O B L E M S T A T I S T I C S
-----------------------------------
SELFWEIGHT Y -1.000
FOR LOADING - 1
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM-Z
1 0.00000E+00-3.50891E-02 4.65126E-11 0.00000E+00 2.30791E-11-4.67855E-03
2 0.00000E+00-1.22812E-01 1.11541E-10 0.00000E+00-1.18195E-10-2.45624E-02
3 0.00000E+00-1.75445E-01 1.30056E-10 0.00000E+00 0.00000E+00 0.00000E+00
4 0.00000E+00-1.75446E-01 7.44816E-10 0.00000E+00 2.49611E-10-1.01772E-08
5 0.00000E+00-1.75445E-01 1.15428E-09 0.00000E+00-8.29760E-11 2.04168E-08
6 0.00000E+00-1.75445E-01 9.48989E-10 0.00000E+00 0.00000E+00 0.00000E+00
7 0.00000E+00-1.75445E-01 1.15428E-09 0.00000E+00 8.29760E-11-2.04168E-08
X = 0.731000028E+01
Y = 0.000000000E+00
Z = 0.000000000E+00
TOTAL APPLIED LOAD 1
JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ
SUPPORT=1
2 0.00 -0.12 0.00 0.00 -0.00 -0.02
0.00 -0.03 0.00 0.00 0.00 0.02 111100
FOR LOADING - 2
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM-Z
1 0.00000E+00-5.32000E-02-1.95068E-10 0.00000E+00-1.74136E-11-7.09333E-03
2 0.00000E+00-1.86200E-01-4.26823E-10 0.00000E+00 7.25405E-10-3.72400E-02
3 0.00000E+00-2.66000E-01-2.92143E-09 0.00000E+00 0.00000E+00 0.00000E+00
4 0.00000E+00-2.66000E-01-5.78881E-09 0.00000E+00-8.32718E-10-1.71493E-08
5 0.00000E+00-2.66000E-01 1.17548E-09 0.00000E+00 7.49742E-10 3.75661E-08
6 0.00000E+00-2.66000E-01 3.55424E-10 0.00000E+00 0.00000E+00 0.00000E+00
7 0.00000E+00-2.66000E-01-2.92143E-09 0.00000E+00-7.49742E-10-3.75661E-08
8 0.00000E+00-2.54030E-01 1.36099E-09 0.00000E+00 5.55179E-10 7.62090E-03
9 0.00000E+00-1.21030E-01 3.63224E-10 0.00000E+00-4.30452E-10 3.67125E-02
X = 0.731000024E+01
Y = 0.000000000E+00
Z = 0.000000000E+00
TOTAL APPLIED LOAD 2
JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ
SUPPORT=1
2 0.00 -0.19 -0.00 0.00 0.00 -0.04
0.00 -0.05 0.00 0.00 -0.00 0.04 111100
FOR LOADING - 3
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM-Z
1 0.00000E+00-6.64567E-01-9.96759E-02 0.00000E+00 1.32901E-02-8.86089E-02
2 0.00000E+00-2.32598E+00-3.48866E-01 0.00000E+00 6.97731E-02-4.65197E-01
3 0.00000E+00-3.32283E+00-4.98380E-01 0.00000E+00 0.00000E+00 0.00000E+00
4 0.00000E+00-3.32283E+00-4.98380E-01 0.00000E+00 3.19647E-08-2.13118E-07
5 0.00000E+00-3.32283E+00-4.98380E-01 0.00000E+00-7.19207E-08 4.79515E-07
6 0.00000E+00-3.32283E+00-4.98379E-01 0.00000E+00 0.00000E+00 0.00000E+00
7 0.00000E+00-3.32283E+00-4.98380E-01 0.00000E+00 7.19207E-08-4.79515E-07
8 0.00000E+00-3.17331E+00-4.75953E-01 0.00000E+00-1.42786E-02 9.51992E-02
9 0.00000E+00-1.51189E+00-2.26763E-01 0.00000E+00-6.87847E-02 4.58607E-01
X = 0.731000030E+01
Y = 0.000000000E+00
Z = 0.000000000E+00
X = 0.731000030E+01
Y = 0.000000000E+00
Z = 0.000000000E+00
TOTAL APPLIED LOAD 3
JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ
SUPPORT=1
2 0.00 -2.33 -0.35 0.00 0.07 -0.47
0.00 -0.65 -0.10 0.00 -0.07 0.47 111100
37. PARAMETER 1
38. CODE AISC UNIFIED 2016
39. LY 1 ALL
40. LX 1 ALL
41. METHOD LRFD
42. FYLD 248213 ALL
43. STEEL TAKE OFF LIST ALL
STEEL TAKE-OFF
--------------
44. PARAMETER 2
45. CODE AISC UNIFIED 2016
46. CHECK CODE ALL
STEEL DESIGN
The capacity results and intermediate results in the report follow the notations
and axes labels as defined in the AISC 360-16 code.
The analysis results are reported in STAAD.Pro axis convention and the AISC 360:16
design results are reported in AISC 360-16 code axis convention.
1. Section classification reported is for the cross section and loadcase that
produced the worst case design ratio for flexure/compression Capacity results.
2. Results for any Capacity/Check that is not relevant for a section/loadcase
based on the code clause in AISC 360-16 will not be shown in the report.
3. Bending results are reported as being “about” the relevant axis (X/Y), while
the results for shear are reported as being for shear forces “along” the axis.
E.g : Mx indicates bending about the X axis, while Vx indicates shear along
the X axis.
47. FINISH
************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) 1997-2017 Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************