Professional Documents
Culture Documents
KASE - Pumps - General Presentation - 220707
KASE - Pumps - General Presentation - 220707
Systems
● 80% weight reduction compared to bronze impellers ● Lifetime corrosion warranty (composite components)
● Sizes up to 20” diameter ● Easy rolling chassis
● Available in flows up to 6000 GPM (22712 LPM) ● Adaptable discharge (different sizes available)
● Lifetime corrosion warranty ● 60-80% weight reduction compared to aluminum and
steel based submersible pumps
● Threaded quick-connect hydraulic connections
● Available in flows exceeding 5000 GPM (18927 LPM)
Hydraulic Connections:
● Weight – 100 lbs (45 kg) 1. High pressure power
2. Low pressure return
● 20” minimum required operating depth 3. Case drain
● Width: 22” (559 mm)
● Height: 22” (559 mm)
● Depth: 27” (686 mm)
● Centrifugal Pump
● Hydra-Leduc Hydraulic Motor
● Pump Impeller
6” or 8” discharge
○ Corrosion-proof carbon fiber-reinforced
polymer
● Pump Casing
○ Corrosion-proof (Carbon, Aramid)
fiber-reinforced polymer composite foam filled pontoon flotation with
integrated handles
● 360° suction flow dynamics
● UV resistant
Composite casing
● Enclosure Skid
○ Structural steel frame with aluminum
panel enclosure
○ Longitudinal and transverse fork pockets
● Engine Driver System
○ Tier 4/Euro V: Kohler 3.3L 134 HP
○ Tier 3: Deere 4.5L 140 HP
○ 30 gallon fuel tank for 4-hr run time at
100% engine load
● Hydraulic Power System
○ Closed loop hydraulic power system with
variable displacement hydraulic pump
○ 15 gal hydraulic tank
○ Non-toxic, biodegradable hydraulic fluid
● Hose Reel
○ Standard 100 ft (30 m) umbilical high
pressure hydraulic hoses
○ > 100 ft option available
● Interior and Exterior LED Lighting
● Integral heavy-duty forklift pockets and
top lifting rings (airlift hooks)
● Total weight with Otter pump stored
inside – 3800 lbs (1724 kg) w/fuel
Hose Reel
Control Panel
Hydraulic Reservoir
Fuel Tank Fill
Bridge Deployment
THANK YOU