Professional Documents
Culture Documents
Pagging Lte
Pagging Lte
E-UTRAN initiates the paging procedure by transmitting a PAGING message at the UE's paging
occasion as specified in TS 36.304. E-UTRAN may address multiple UEs within a PAGING message by
including one PagingRecord for each UE
In LTE, there is only one type of PAGING where as in the case of 3G-system, Paging
Type1 and Paging Type2 are defined
The PAGING message may be used to inform UEs in RRC_IDLE and RRC_CONNECTED about
a system information change. If the UE receives a PAGING message including
the systemInfoModification IE, it knows that the system information will change at the next
modification period boundary. The UE, if the systemInfoModification is included, should re-acquire the
required system information using the system information acquisition procedure
The PAGING message may also be used to inform ETWS (Earthquake and Tsunami Warning
System) capable UEs in RRC_IDLE and UEs in RRC_CONNECTED about presence of an ETWS primary
notification and/or ETWS secondary notification. An ETWS capable UE should re-
acquire SIB10/SIB11 immediately if the etws-Indication is included in the PAGING message
The PAGING message may also be used to inform CMAS (Commercial Mobile Alert System)
capable UEs in RRC_IDLE and UEs in RRC_CONNECTED about presence of one or more CMAS
notifications. A CMAS capable UE should re-acquire SIB12 immediately if the cmas-Indication is included
in the PAGING message