Professional Documents
Culture Documents
Ply Wood DATASheet
Ply Wood DATASheet
Numeruos applications for non load-bearing purposes in dry areas for interior decoration
(Classification acc. to EN 622-5 MDF)
Construction
Size
Properties
bending elasticity module: N/mm² 2700 2500 2200 2100 1900 EN 310
cross tensile strength: N/mm² 0,65 0,60 0,55 0,55 0,5 EN 319
Seite 1 von 2
M. KAINDL OG, 5071 Wals / Salzburg, Austria, Kaindlstraße 2, T: +43(0)662 / 8588-0, F: +43(0)662 / 851331, sales@kaindl.com, www.kaindl.com
Tolerances
Storage tips
Further Processing
Kaindl MDF E1/CA boards can be processed by common wood working machines.
Kaindl MDF E1/CA boards should always be calibrated before coating the surface.
In every case a colour or reference sample has to be made before a further surface treatment to avoid any surface mistakes.
Kaindl MDF E1/CA boards are not planned for 3D processing (depth milling, etc.). For lacquering instructions, see Kaindl Info Sheet No. 10.
If you have any further questions please connect your salesperson or see www.kaindl.com
The recommendations and information given in this Product Sheet are to the best of our knowledge in keeping with the present state of the art.
However, they are intended purely for information purposes and as noncommittal guide-lines. As such they cannot constitute grounds
for any claim under warranty.
Seite 2 von 2
M. KAINDL OG, 5071 Wals / Salzburg, Austria, Kaindlstraße 2, T: +43(0)662 / 8588-0, F: +43(0)662 / 851331, sales@kaindl.com, www.kaindl.com