Professional Documents
Culture Documents
BLK2GO How To Connect To The Scanner's
BLK2GO How To Connect To The Scanner's
General Article
Summary
Information on how to connect to the webserver on the BLK2GO and the available functions.
Information
The BLK2GO's web interface allows users to...
1. Connect the scanner to a workstation using the USB-C cable delivered with the scanner or connect to the scanner via WIFI.
2. Open a web browser and enter the following IP address: 10.1.1.1
3. The scanner's web interface Home page should appear as seen below.
8/9/2023 1/8
Below is detailed information on the available webserver functions:
8/9/2023 2/8
The new scan is available in the ‘Last Scans’ list
8/9/2023 3/8
Scans page: List of stored scans on the device.
WIFI page: To pair the BLK2GO Live Android or iOS version you can scan this QR code.
8/9/2023 4/8
Device>Firmware Update page
File Upload: if you already stored the firmware and want to upload to your device.
Official Releases: if you want to download the firmware you want to update to and also look into the release notes related to it.
8/9/2023 5/8
Device>Configuration page
Factory Reset: same functionality as in the BLK2GO live app to reset to factory settings.
8/9/2023 6/8
Send report to Leica: Service report will be sent to us as you do with the app.
8/9/2023 7/8
Device>Reboot
The device will be rebooted. As soon as the connection between laptop and device is restored, refresh the page and internal webpage will be updated with live info from the device.
Article Number
000009166
8/9/2023 8/8