The quality assurance plan outlines tests to ensure structural work meets specifications. It requires testing the cement for initial and final setting time and compressive strength. Aggregates must be tested for sieve analysis, specific gravity, water absorption, impact and abrasion values. Concrete testing includes trial mix designs, compressive strength cubes, and slump tests. Grouting compressive strength is also tested periodically to achieve minimum strengths. The plan aims to confirm materials and concrete meet Indian Standards and MORTH specifications.
The quality assurance plan outlines tests to ensure structural work meets specifications. It requires testing the cement for initial and final setting time and compressive strength. Aggregates must be tested for sieve analysis, specific gravity, water absorption, impact and abrasion values. Concrete testing includes trial mix designs, compressive strength cubes, and slump tests. Grouting compressive strength is also tested periodically to achieve minimum strengths. The plan aims to confirm materials and concrete meet Indian Standards and MORTH specifications.
The quality assurance plan outlines tests to ensure structural work meets specifications. It requires testing the cement for initial and final setting time and compressive strength. Aggregates must be tested for sieve analysis, specific gravity, water absorption, impact and abrasion values. Concrete testing includes trial mix designs, compressive strength cubes, and slump tests. Grouting compressive strength is also tested periodically to achieve minimum strengths. The plan aims to confirm materials and concrete meet Indian Standards and MORTH specifications.
Sl. No Item Test Test Method Minimum Frequency Specified Value
Initial & Final Setting time IS-4031:1988 MORTH, CL. 1006 & Part 5 Qty received at site on any Confirm to 1. Cement day, subjected to a max of IS-8112:2013 Compressive Strength IS-4031:1988 500 MT. IS-12269:2013 Part 6 IS-1489:1991 Moisture Content IS-2386:1963 Daily before start concrete IS-383:1970, Part 2 production and as required IRC SP-47:1998 Specific gravity& water IS-2386:1963 At the beginning of Mix IS-383:1970, absorption Part-3 design & for every change IRC SP-47:1998 of source Sieve Analysis IS-2386:1963 At the beginning of Mix IS-383:1970, Part-1 design & for every change IRC SP-47:1998 of source/ stack & for every major structural element Aggregate IS-2386:1963 At the beginning of Mix IS-383:1970, Aggregate (CA & 2. crushing/Impact/Abrasion Part-4 design & for every change IRC SP-47:1998 FA) Value for CA of source IS-2386:1963 At the beginning of Mix IS-383:1970, Flakiness Index for CA Part-1 design & for every change IRC SP-47:1998 of source/ stack & for every major structural element IS-2386:1963 At the beginning of Mix IS-383:1970, Deleterious content Part-2 design & for every change IRC SP-47:1998 of source/ stack & for every major structural element
FSEL-1034-QAM Rev. R 1 Page
Sl. No Item Test Test Method Minimum Frequency Specified Value Trial Mix design IS 10262, IRC For every Grade and MORTH CL. 112 revised if source of any 1704.2.2 constituent is changed Compressive Strength of IS-516:1959 MORTH Table 1700-9 IS-456:2000 3. Concreting Cubes MORTH Section- 1700 Workability- Slump IS-1199:1959 As per site requirement IS-456:2000, MORTH CL. 1704.1 Test should be conducted for Min 27MPa at 7 days Compressive strength each job periodically or 30MPa at 28 days. 4. Grouting (100mm X 100mm X 100 IS:516-1959 As per MORTH mm) Appendix-1800/III Cl. 4