1. This document is an interim test report from JK Cement Works Quality Control Laboratories that analyzes a sample of 43 grade ordinary Portland cement according to IS 269:2015 standards.
2. The report details the chemical and mechanical test results, including loss on ignition, insoluble residue, SO3, MgO, chloride, lime saturation factor, and compressive strength at various ages.
3. All test results were found to meet the requirements of IS 269:2015, indicating the cement sample conforms to specifications for 43 grade ordinary Portland cement.
1. This document is an interim test report from JK Cement Works Quality Control Laboratories that analyzes a sample of 43 grade ordinary Portland cement according to IS 269:2015 standards.
2. The report details the chemical and mechanical test results, including loss on ignition, insoluble residue, SO3, MgO, chloride, lime saturation factor, and compressive strength at various ages.
3. All test results were found to meet the requirements of IS 269:2015, indicating the cement sample conforms to specifications for 43 grade ordinary Portland cement.
1. This document is an interim test report from JK Cement Works Quality Control Laboratories that analyzes a sample of 43 grade ordinary Portland cement according to IS 269:2015 standards.
2. The report details the chemical and mechanical test results, including loss on ignition, insoluble residue, SO3, MgO, chloride, lime saturation factor, and compressive strength at various ages.
3. All test results were found to meet the requirements of IS 269:2015, indicating the cement sample conforms to specifications for 43 grade ordinary Portland cement.
Kailash Nagar No.1- 312617 NIMBAHERA, Dist.-Chittorgarh (RAJ.), Phone-01477-220087, 220098, 220562, E-mail: jkc.nbh@jkcement.com TC-6535 INTERIM TEST REPORT Description : 43 Grade Ordinary Portland Cement as per IS:269:2015 Customer Name & Address :Packing Plant JKCW-NBH/Marketing Sample ID : 43OPC/W-08/62 Unique Lab Report : TC6535240000000046F Sample received date : 29.02.2024 Date of Performance of Testing : 29.02.2024 to 07.03.2024 Date of reporting : 07.03.2024 Location of Test Performed : Chemical Lab & Mechanical Lab Description of Sample : 24kg(approx.) The test report pertains to the average sample of week no. : 08 ( 22.02.2024 to 29.02.2024 ) CHEMICAL ANALYSIS OF CEMENT: S.NO SAMPLE TEST TYPE [UOM] TEST REQUIRMENT as IS METHOD RESULTS per IS 269:2015 1 LOI (% by mass) [%] 3.040 Max. 5.0 IS: 4032:1985 2 Insoluble Residue (% by mass) [%] 2.92 Max. 5.0 IS: 4032:1985 3 SO3 (% by mass) [%] 2.72 Max. 3.5 IS: 4032:1985 4 MgO (% by mass) [%] 1.10 Max. 6.0 IS: 4032:1985 5 Na2O** (%) [%] 0.14 - IS: 4032:1985 6 K2O** (%) [%] 0.46 - IS: 4032:1985 7 Chloride (% by mass) [%] 0.018 Max. 0.1 IS: 4032:1985 8 Lime Saturation Factor [%] 0.86 0.66-1.02 - 9 A/F 1.06 Min. 0.66 - 10 Performance Improver (Lime Stone) by % [%] 4.94 Max. 5.0 - MECHANICAL TESTS OF CEMENT: 1 Fineness (M2/Kg) [M2/Kg] 290.00 Min. 225 IS: 4031 P-2: 1999 2 Standard Consistency (%) [%] 28.02 - IS: 4031 P-4: 1988 3 Soundness a Le-Chatelier (mm) [mm] 1.00 Max. 10.0 IS: 4031 P-3: 1988 b Autoclave Expansion (%) [%] 0.03 Max. 0.8 IS: 4031 P-3: 1988 4 Setting time a Initial Setting Time [Minute] 140.00 Min. 30 IS: 4031 P-5: 1988 b Final Setting Time [Minute] 180.00 Max. 600 IS: 4031 P-5: 1988 5 Compressive Strength a 3 Days (72 ± 1 Hrs.) [Mpa] 33.50 Min. 23 IS: 4031 P-6: 1988 b 7 Days (168 ± 2 Hrs.) [Mpa] 43.00 Min. 33 IS: 4031 P-6: 1988 c 28 Days (672 ± 4 Hrs.) [Mpa] U/T Min. 43 & Max.58 IS: 4031 P-6: 1988 Remarks: 1. Environmental Condition: Temperature: - 27±20C; Humidity: - Not less than 65% 2. The results listed refer only to the tested sample(s) and parameter(s). Authorized Signatory 3. This report is not to be reproduced wholly or in part and cannot be used as evidence in the Court of law P.K. SANCHETI and should not be used in any advertising media without our special permission in writing. ( TM / QM ) 4.** Not in NABL Scope (Chemical & Mechanical Section) 5. ULR- Unique Lab Report. 6.Humidity for Fineness 65% Max Documnet No.-TR/23A Amendment No.- 09 Date of Issue-01.04.2013 Page No.- 1 of 1 END of Report