Professional Documents
Culture Documents
Technical - VI in 8 - 200LPH
Technical - VI in 8 - 200LPH
Technical Details :-
Parameters Model VI In 8
Litres per Hour Discharge -- 200
Heating Capacity kW 8
Heating Power Input kW 2.16
Operating Current – A 12
Overall
Power Supply V/Ph/Hz 230 / Single / 50
COP – Overall 3.7
o
Continuous Output C 60/65
Water Temperature
o
Working Ambient Temperature C / oF (-) 10 to (+) 45 / (+) 14 to (+) 113
Refrigerant Type R134a / R407a
Type Intelligent PCB Controller
Operating Control Control Panel LED display / LCD display with Backlight
Protection Function Overload, Cut Off on High and Low Pressure,
Phase Voltage Sequence, Dry Run, Time Delay, etc.
Dimensions (10- 15% Length mm 600
Variation) Width mm 450
Height mm 600
Back-Up Heating KWH 6
Element Capacity (if applicable)
Back-Up Heating A 12
Element – Current (if applicable)
Pressure bar Test : 10
Working : 6
Unit Noise Level dB 50 to 60
Net / Gross Weight Kg 90
VIZIO INDUSTRIES
10, Ganesh Nagar, Godoli, Satara
vizioindustries@yahoo.com
MS Pressure Tank, 3mm Shell, and 4mm Dish End Thick.
100 mm Rockwool Insulation / FOAM,24 G Al. Cladding .
3 layer Epoxy – Primer - Ceramic coat (Properties below).
VIZIO INDUSTRIES
10, Ganesh Nagar, Godoli, Satara
vizioindustries@yahoo.com
Heat Pump – Design Criteria
1) Design is done for Geographical Location, considering ambient weather and available water quality
2) Robust Industrial design for Outer panels to withstand rough weather conditions
3) Electrical and Electronic components used are available in local market as easy replacement
4) Back up provided as default
5) Heat Pump is fitted with sensor so that it doesn’t work in sunlight if combined with Solar Water
Heating, thus giving additional energy saving
6) Optional, Guest Calculator to ensure that the Heat Pump works at optimal level to deliver perfect
temperature, giving additional energy saving.
Design Data
Working Pressure: 8 Bar
o
Rated Ambient Temperature: 15 C
o
Cold Water Temperature: 20 C
o
Hot Water Temperature: 60 C
o
Min allowed Ambient Temperature: 0 C
Water hardness: 250 ppm
VIZIO INDUSTRIES
10, Ganesh Nagar, Godoli, Satara
vizioindustries@yahoo.com
Indicators:
• Power On
• Compressor On
• Fan On
• Pump On
• High Pressure System Failure
• Low Pressure System Failure
• Digital Energy Meter (Optional)
o kWh consumption
o Voltage
o Power Factor
Notes:
• Due to continuous technical improvement in the product range, the input might vary at the time of system
delivery by 10-20%. However, the energy consumption will remain same.
• Higher the cold water inlet temp, lower the efficiency
Electrical Specifications:
• Electrical power source:
o 3 phase / 1 phase
• Supply Frequency – 50 hz / 60 hz
• Voltage:
o 380 – 410 V – 3 Phase
o 220 – 230 V – 1 Phase
• Power factor: 1 (unity)
In case the electrical supply is having voltage fluctuation, you shall have to provide the voltage stabilizer of
requisite rating. Without stabilizer, heat pump shall not be permitted to start the operation. If any part fails in
absence of voltage stabilizer, heat pump warranty shall be null and void
VIZIO INDUSTRIES
10, Ganesh Nagar, Godoli, Satara
vizioindustries@yahoo.com