Professional Documents
Culture Documents
A320 Operational Test of The Navigation Lights
A320 Operational Test of The Navigation Lights
TASK 33-41-00-710-001-A
Operational Test of the Navigation Lights
FIN: 10LA
** ON A/C FSN 001-049, 051-120, 151-227, 230-233, 235-237, 242-242, 246-249,
251-272, 274-275, 282-283, 290-300, 451-455, 457-500, 901-901, 903-950
15LA
** ON A/C FSN 228-229, 234-234, 238-241, 243-245, 276-281, 284-289, 301-370,
401-408, 410-450, 456-456, 501-558, 571-572, 574-650, 653-801, 803-900, 953-
999
16LA
** ON A/C FSN ALL
9LA
WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE
YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/O
R CAN CAUSE DAMAGE TO THE EQUIPMENT.
WARNING: MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LAN
DING GEAR. THIS WILL PREVENT UNWANTED MOVEMENT OF THE LANDING GE
AR, AND THUS POSSIBLE INJURY TO PERSONS AND DAMAGE TO THE AIRCRAF
T AND/OR EQUIPMENT.
WARNING: DO NOT LOOK DIRECTLY AT THE LIGHT FLASH DURING THE TEST.
SUPPLY A COVER, OR SHIELD, TO GIVE PROTECTION FROM THE LIGHT FLASH T
O PERSONS IN THE TEST AREA.
QT
REFERENCE DESIGNATION
Y
No specific AR SAFETY BARRIER(S)
No specific AR WARNING NOTICE(S)
B. Referenced Information
1/8
REFERENCE DESIGNATION
Ref. 24-41-00-861-002-A Energize the Aircraft Electrical Circuits from the External P
ower
Ref. 24-41-00-861-002-A01 Energize the Aircraft Electrical Circuits from the APU
Ref. 24-41-00-861-002-A02 Energize the Aircraft Electrical Circuits from Engine 1(2)
Ref. 24-41-00-862-002-A De-energize the Aircraft Electrical Circuits Supplied from t
he External Power
Ref. 24-41-00-862-002-A01 De-energize the Aircraft Electrical Circuits Supplied from t
he APU
Ref. 24-41-00-862-002-A02 De-energize the Aircraft Electrical Circuits Supplied from t
he Engine 1(2)
SUBTASK 33-41-00-861-050-A
B. Energize the Electrical Circuits
(1) Energize the aircraft electrical circuits Ref. AMM TASK 24-41-00-861-002.
4. Procedure
** ON A/C FSN 001-049, 051-120, 201-220, 251-261, 269-269, 282-283, 290-29
1, 901-901, 903-950
Ref. Fig. Navigation Lights - Component Location
** ON A/C FSN 151-200, 221-227, 230-233, 235-237, 242-242, 246-249, 262-26
8, 270-272, 274-275, 292-300, 451-455, 457-500
2/8
EMB SB 57-1186 for A/C 262-267, 272-272, 292-292
Ref. Fig. Navigation Lights - Component Location
** ON A/C FSN 228-229, 234-234, 238-241, 243-245, 276-281, 284-289, 301-37
0, 401-408, 410-450, 456-456, 501-558, 571-572, 574-650, 653-801, 803-900, 95
3-999
Ref. Fig. Navigation Lights - Component Location
** ON A/C FSN 001-049, 051-120, 201-220, 251-261, 269-269, 282-283, 290-29
1, 901-901, 903-950
SUBTASK 33-41-00-710-050-D
A. Operational Test
(1) Operational Test of the Navigation Lights
ACTION RESULT
1. On the EXT LT control panel 25VU: - the NAV 1 lamps of the navigation
- put the toggle switch NAV & LOG lights (9LA and 10LA) come on
O (3LA) to the 1 position - the NAV 1 lamp of the navigation li
ght (15LA) comes on
- put the toggle switch NAV & LOG - the NAV 2 lamps of the navigation
O (3LA) to the 2 position lights (9LA and 10LA) come on an
d the NAV 1 lamps go off
- the NAV 2 lamp of the navigation li
ght (15LA) comes on and the NAV
1 lamp goes off
- put the toggle switch NAV & LOG - the navigation lights (9LA, 10LA a
O (3LA) to the OFF position. nd 15LA) go off.
3/8
ACTION RESULT
1. On the section EXT LT of the overhe - The NAV 1 LEDs of the navigation l
ad control and indicating panel 25VU: ight of the left wing tip (9LA) come
- Put the toggle switch NAV & LOG on.
O (3LA) to the 1 position. - The NAV 1 LEDs of the navigation l
ight of the right wing tip (10LA) co
me on.
- The NAV 1 lamp of the rear naviga
tion light (15LA) comes on.
2. On the section EXT LT of the overhe - The NAV 1 LEDs of the navigation l
ad control and indicating panel 25VU: ight of the left wing tip (9LA) go of
- Put the toggle switch NAV & LOG f.
O (3LA) to the 2 position. - The NAV 2 LEDs of the navigation l
ight of the left wing tip (9LA) come
on.
- The NAV 1 LEDs of the navigation l
ight of the right wing tip (10LA) go
off.
- The NAV 2 LEDs of the navigation l
ight of the right wing tip (10LA) co
me on.
- The NAV 1 lamp of the rear naviga
tion light (15LA) goes off.
- The NAV 2 lamp of the rear naviga
tion light (15LA) comes on.
3. On the section EXT LT of the overhe - The NAV 2 LEDs of the navigation l
ad control and indicating panel 25VU: ight of the left wing tip (9LA) go of
- Put the toggle switch NAV & LOG f.
O (3LA) to the OFF position. - The NAV 2 LEDs of the navigation l
ight of the right wing tip (10LA) go
off.
- The NAV 2 lamp of the rear naviga
tion light (15LA) goes off.
4/8
ACTION RESULT
1. On the section EXT LT of the overhe - The NAV 1 LEDs of the left light na
ad control and indicating panel 25VU: vigation-assembly (9LA) come on.
- Put the toggle switch NAV & LOG - The NAV 1 LEDs of the right light n
O (3LA) to the 1 position. avigation-assembly (10LA) come o
n.
- The NAV 1 LEDs of the navigation
and strobe rear light-assembly (16
LA) come on.
2. On the section EXT LT of the overhe - The NAV 1 LEDs of the left light na
ad control and indicating panel 25VU: vigation-assembly (9LA) go off.
- Put the toggle switch NAV & LOG - The NAV 2 LEDs of the left light na
O (3LA) to the 2 position. vigation-assembly (9LA) come on.
- The NAV 1 LEDs of the right light n
avigation-assembly (10LA) go off.
- The NAV 2 LEDs of the right light n
avigation-assembly (10LA) come o
n.
- The NAV 1 LEDs of the navigation
and strobe rear light-assembly (16
LA) go off.
- The NAV 2 LEDs of the navigation
and strobe rear light-assembly (16
LA) come on.
3. On the section EXT LT of the overhe - The NAV 2 LEDs of the left light na
ad control and indicating panel 25VU: vigation-assembly (9LA) go off.
- Put the toggle switch NAV & LOG - The NAV 2 LEDs of the right light n
O (3LA) to the OFF position. avigation-assembly (10LA) go off.
- The NAV 2 LEDs of the navigation
and strobe rear light-assembly (16
LA) go off.
SUBTASK 33-41-00-942-054-A
B. Removal of Equipment
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the safety barriers.
(3) Remove the WARNING NOTICE(S).
(4) Remove the ground support and maintenance equipment, the special and standar
d tools and all other items.
5/8
10LA
Z634
15LA
Z317
9LA
Z534
A
25 VU
EXT LT
BEACON WING NAV & LOGO
ON ON 2
1
3LA
OFF OFF OFF
LAND
L R NOSE
ON T.O
OFF TAXI
RETRACT OFF
N_MM_334100_5_AGM0_01_00
6/8
Z634 Z317
B D
C
B
Z210
Z534
A A
9LA 15LA
(10LA)
B C
LH SHOWN
RH SYMMETRICAL
3LA
25VU TYPICAL
D
N_MM_334100_5_ARM0_01_00
7/8
Z634 Z317
B D
C
B
Z210
Z534
A A
9LA 16LA
(10LA)
B C
LH SHOWN
RH SYMMETRICAL
3LA
25VU TYPICAL
D
N_MM_334100_5_AQM0_01_00
8/8