Professional Documents
Culture Documents
Q26 Series Sensors: B A C D
Q26 Series Sensors: B A C D
• Reliable detection of clear, translucent, or opaque objects—including PET and glass containers, transparent films,
and mirror-like surfaces
• Coaxial optics enable reliable detection of targets to the face of the sensor
• Simple set-up and adjustment with a single turn sensitivity adjuster potentiometer
• Light Operate and Dark Operate selection by rotary switch
• Compact sensor housing size of 14 x 25 x 42 mm
Models
Model Mode Range Output Connector
Overview
The Banner Q26 sensor is a high performance clear object sensor. The polarized coaxial optical design ensures reliable detection of transparent, opaque, or reflective
targets at any distance between the sensor and the reflector. Sensitivity adjustment of the sensor is done with a single turn potentiometer. Light Operate and Dark Operate
selection is made by a sealed rotary switch.
0 159712 5
Q26 Series Sensors
Wiring
NPN PNP
3 – 1
+
1 12-30V dc 3 12-30V dc
+ –
4 Load 1 4 Load 1
2 2 2 2
Health Health
ON ON
OFF OFF
0.5 1.0 1.5 2.0 2.5 0.5 1.0 1.5 2.0 2.5
Excess Gain Excess Gain
Specifications
Supply Voltage and Current Output Response Time
12 to 30V dc (10% maximum ripple within specified limits) 250 μS ON and OFF
Supply Current (exclusive of load current): 15 mA Repeatability
Supply Protection Circuitry 50 microseconds
Protected against reverse polarity and transient voltages Construction
Output Configuration ABS plastic housing; glass window
Primary output (pin 4) NPN or PNP (current sinking or sourcing), de- Indicators
pending on model; secondary output (pin 2) is a Health mode output. Green steady: Power ON
Output Rating Yellow steady: Output conducting
100 mA max Environmental Rating
OFF-state leakage current: less than 1 microamp at 30V dc Leakproof design rated IP67
ON-state saturation voltage: less than 1V at 10 mA dc; less than 1.5V
at 150 mA dc Operating Conditions
Temperature: −10 °C to +55 °C (+14 °F to +131 °F)
Output Protection Circuitry
Humidity: 90% at +50 °C maximum relative humidity (non-condensing)
Protected against false power-up and continuous overload or short cir-
cuit of outputs Connection
4-pin Threaded/Snap M8/Pico-Style QD connector or 4-pin 150 mm (6
Emitter LED Wavelength
in) Euro-style pigtail QD with PVC cable jacket
660 nm
Vibration and Shock
Emitter Beam Diameter
EN60068-2-6
See Figure 6. Spot Diameter Diagram on page 4
EN60068-2-27
Certifications
Dimensions
All measurements are listed in millimeters (inches).
25
[.98]
14
[.55]
7
[.28]
9,3
[.36]
11
[.43]
3,5 0,9 5,3
[.14] [.04] 3,5 [.21]
[.14]
20 15
[.79] [.59]
42
[1.65] 27,5
[1.08]
2X 3,2
[ .13 ] 9,4 RECEIVER
[.37] EMITTER
2,6
[.10] M8 X 1
10 Max. Torque 0.8 Nm (7 in. lbs.)
[.39]
50
20 40
Reflector
30
Reflector BRT-84X84
BEAM PATTERN (mm)
BEAM PATTERN (mm)
10 20 BRT-60X40C
BRT-60X40IP69K BRT-60X40AF
BRT-35x20A 10
BRT-THG-1
0
0
-10
-20
-10
-30
-40
-20
0 100 200 300 400 -50
0 500 1000
DISTANCE (mm) DISTANCE (mm)
40.0
35.0
Accessories
Cordsets
4-Pin Threaded M8/Pico-Style Cordsets
M8 x 1
1 = Brown
PKW4M-2 2.00 m (6.56 ft) 2 = White
28 Typ. 3 = Blue
PKW4M-5 5.00 m (16.4 ft) 4 = Black
M8 x 1
ø 9.5
M12 x 1
ø 14.5 [0.57"]
Brackets
All measurements are listed in millimeters.
SMBLSTDLQ26 SMBLSTQ26
15 15
• Adjustable right-angle metal • Right-angle bracket
bracket • 304 stainless steel
• 304 stainless steel 72
35
15
32
Reflectors
BRT-60X40AF BRT-60X40IP69K
• Rectangular, acrylic target • Rectangular, acrylic target (color is amber)
• Reflectivity Factor: 1.4 • Reflectivity Factor: 0.7
• Temperature: –20 °C to +60 °C (−4 °F to +140 • Temperature: –20 °C to +140 °C (–4 °F to +284
°F) °F)
• Anti-fogging coating for use around steam • Chemically resistant
• Optional brackets are available • IP69K washdown rated
• Approximate size: 40 mm x 60 mm • Optional brackets are available
• Approximate size: 40 mm x 60 mm
BRT-84X84A
• Square, acrylic target
• Reflectivity Factor: 2.0
• Temperature: –20 °C to +60 °C (−4 °F to +140
°F)
• Approximate size: 84 mm x 84 mm
Reflective Tape
BRT-THG-1-100 0.7 +60 °C (+140 °F) 25 mm (1 in) wide, 2.5 m (100 in) long
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.