Professional Documents
Culture Documents
h07rn 8 F Bs en 50525 2 21 Flexible Rubber Cable
h07rn 8 F Bs en 50525 2 21 Flexible Rubber Cable
h07rn 8 F Bs en 50525 2 21 Flexible Rubber Cable
H07RN-8-F BS EN 50525-2-21
Flexible Rubber Cable
APPLICATION STANDARDS
For installation in dry, damp or wet environments, in workshops BS EN 50525-2-21, HD 22.4S3, CEI 20-19 Part 16,
with explosive atmospheres: it can be immersed in fresh water BS EN 60228, VDE 0295
up to 10m depth and it could be used as energy supply cable
for submersed pumps. Not suitable for underwater power Flame Retardant according to BS EN/IEC 60332-1-2
transmission or installation in a waterway or where mechanical
damage might occur and cause hazard. For connections
liable to moderate mechanical stresses, i.e. industrial or
agricultural workshop apparatus, large boilers, heater plates,
electric tools such as drills and disk saws, electric appliances,
portable motors and generators on building sites; also for fixed
ISO/IEC 17025 LABORATORY TESTED
installations along floors or shelving on temporary job sites, for
connecting structural elements in lifting apparatus, machinery, This product is subject to the Quality Assurance protocols of The Cable Lab®,
an ISO/IEC 17025 accredited cable testing laboratory. Testing includes vertical
etc. Suitable for applications up to 1kV for adequately flame, conductor resistance, tensile & elongation, and dimensional consistency,
protected fixed installations (i.e. inside pipes or equipment) as verified to published standards and approved product drawings.
well as for rotor connections to lifting equipment motors.
ISO/IEC
17025
Accredited
Testing
Laboratory
CHARACTERISTICS
8578 FS 672069 EMS 672067 OHS 672066
Voltage Rating U/Uo
450/750V
REGULATORY COMPLIANCE
Temperature Rating
This cable meets the requirements of the Low Voltage Directive 2014/35/EU
Fixed: -40°C to +60°C and the RoHS Directive 2011/65/EU. RoHS compliance has been tested and
Flexed: -15°C to +60°C confirmed by The Cable Lab® as meeting the requirements of the BSI RoHS
Trusted KitemarkTM.
Minimum Bending Radius
Fixed: 4 x overall diameter RoHS Trusted
KITEMARK™
Flexed: 6 x overall diameter KM 634267
CONSTRUCTION
Conductor
Class 5 flexible copper conductor
Insulation
Rubber
Sheath
Rubber
Core Identification
1 core: Black
2 core: Blue Brown
3 core: Green/Yellow Blue Brown
4 core: Green/Yellow Blue Brown Grey
5 core: Green/Yellow Blue Brown Black Grey
6 core and above: Black with White numbers Green/Yellow
Sheath Colour
Black
DIMENSIONS
ELAND PART NO. NO. OF NOMINAL CROSS CONDUCTOR MINIMUM OVERALL MAXIMUM OVERALL NOMINAL
CORES SECTIONAL AREA DIAMETER DIAMETER DIAMETER WEIGHT
mm2 mm mm mm kg/km
The information contained within this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is
believed to be correct at the time of publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.