Professional Documents
Culture Documents
DC Contactor CB 400 To 1000
DC Contactor CB 400 To 1000
DC Contactor CB 400 To 1000
modular contactors
LENOIR-ELEC · F 54730 GORCY
CB 75 400 to 1000 A
AC poles
CBA 75 400,
CBA 75 500,
CBA 75 630,
CBA 75 800,
CBA 75 1000.
DC poles
CBFC 75 400,
CBFC 75 500,
CBFC 75 630,
CBFC 75 800,
CBFC 75 1000.
■ 1 to 4 single pin main poles with silver pad contacts. ■ NO or NC delayed block, TP 86 type (this one also inclu-
des 4 free instant contacts, i.e. 3 NO + 1NF).
■ Closing electromagnet mounted on the right side of the
poles, (on request, it can be mounted on the left) and ■ Addition of D type and M type auxiliary contact blocks
laminated magnetic circuit. according to different versions.
- control circuit supplied from an AC source:
• for calibres 400 (1 to 4 poles), 500 and 630 (1 to ■ Device to hold the contactor closed in case of untimely
2 poles), without economy resistor. micro-cuts for contactors that are not equipped with a
• over, rectified and power-saved current via a rectifier mechanical latching.
mounted on the contactor.
- control circuit supplied from a DC source: power-saved ■ Mechanical latching with single or double electrical
circuit with economy resistor. release.
■ Mechanical locking: vertical type. ■ Self-protective device for the release coil(s).
43
§07.CB 400 à 1000_GB Page 44 Mercredi, 26. avril 2000 9:45 09
modular contactorse
LENOIR-ELEC · F 54730 GORCY CB 75 400 to 1000 A
Technical features CBA 75 400 to 1000 A
AC contactors
Ue up to 1000 V, 50/60 Hz
Control circuit
Nominal voltageAC, 50 Hz V 24 - 48 - 110 - 127 - 220 - 380 - 500
DC V 24 - 48 - 115 - 220 - 440 - 500
Maximum consumptions inrush/hold
AC(2) 1P VA 2000/175 2000/175 2000/175 500/30 500/30
2P VA 2000/175 2000/225 2500/225 500/30 500/30
3P VA 2000/175 525/30 525/30 750/66 750/66
4P VA 2000/175 525/30 525/30 750/66 750/66
DC 1P W 400/26 400/26 400/26 500/30 500/30
2P W 400/26 525/30 525/30 500/30 500/30
3P W 400/26 525/30 525/30 750/66 750/66
4P W 525/30 525/30 525/30 750/66 750/66
44
§07.CB 400 à 1000_GB Page 45 Mercredi, 26. avril 2000 9:55 09
modular contactorse
LENOIR-ELEC · F 54730 GORCY CB 75 400 to 1000 A
Technical features CBFC 75 400 to 1000 A
DC contactors
Ue up to 2000 VÜ
Control circuit
Nominal voltageAC, 50 Hz V 24 - 48 - 110 - 127 - 220 - 380 - 500
DC V 24 - 48 - 115 - 220 - 440 - 500
Maximum consumptions inrush/hold
AC(2) 1P VA 2000/175 2000/175 2000/175 500/30 500/30
2P VA 2000/175 2000/225 2500/225 500/30 500/30
3P VA 2000/175 525/30 525/30 750/66 750/66
4P VA 2000/175 525/30 525/30 750/66 750/66
DC 1P W 400/26 400/26 400/26 500/30 500/30
2P W 400/26 525/30 525/30 500/30 500/30
3P W 400/26 525/30 525/30 750/66 750/66
4P W 525/30 525/30 525/30 750/66 750/66
45
§07.CB 400 à 1000_GB Page 46 Mercredi, 26. avril 2000 9:48 09
modular contactorse
LENOIR-ELEC · F 54730 GORCY CB 75 400 to 1000 A
Overall dimensions CBA & CBFC 75 400 to 1000 A
Standard AC & DC contactors
CBA: Ue up to 1000 V, 50-60 Hz - CBFC: Ue 500 VÜ
TP D M
4 x Ø 11
H2
H3
CM 200
AV
10 H1
L1 L2 L2 L2 22,5 P
12,5 A 12,5
AV: mechanical locking axis, attachment center-to-center dis- CM: magnetic circuit can be mounted on the left side of the con-
tance between 2 superimposed contactors: tactor. Without any information, it will always be mounted on the
- 400 mm with below contactor of 400, 500 and 600 A calibre, right.
- 575 mm with below contactor of 800 or 1000 A calibre. D: D type auxiliary contact blocks.
TP: delayed auxiliary contact block.
Please advise when you order whether the contactor has to be
equipped with the «shaft end» - necessary to adapt a possible
mechanical locking device.
Without information, the contactor will be delivered without it
Dimensions
A Safety
Calibres H1 H2 H3(1) without delayed contact with delayed contact L1 L2 P perimeter(2)
1P 2P 3P 4P 1P 2P 3P 4P M N
400 38 75 105 250 325 400 450 325 400 475 525 43.5 68 278 45 45
500/630 38 75 105 250 350 425 500 325 425 500 575 45 80 278 75 60
800/1000 33 149 112 325 400 500 600 400 475 575 675 66 92 315 185 85
(1) for equipment with DC supplied or rectified AC supplied coil.
(2) with metallic walls. .
Connecting sections
40
25 25
12 68
25
16
200
TF
TF
200
Ø 12 32
50
28
Ø8
10
23
AP 50 10
PF
12,5 12,5
20
AP PF
46
§07.CB 400 à 1000_GB Page 47 Mercredi, 26. avril 2000 9:48 09
15. CBA - CBFC 75 400 x.0(2)
PG TP R M Disp ACC D PC connecting sections
M M + M Metallic walls
6 25
105 118
22.5 75
15 (3) 13 40
25
37.5 37.5
14
45
modular contactors
V AV 200 200
125
CM 16 R 10 TF
125
37.5
38
52.5 30 141 PC
32 37.5
20 Ø 12
12.5 L1 68 68 S 12.5 258
28
Contactor without «mechanical latching with electrical and manual release» ACC: mechanical latching with
single or double release.
A dimension locking possibility on the right extremity (AV) locking possibility on the left extremity (V) AP: pole axis.
(mm) without delayed contact with delayed contact without delayed contact with delayed contact AV: mechanical locking axis,
Number of attachment centre-to-centre dis-
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 tance between two superimposed
M type blocks contactors:
1 250 300 300 350 350 400 325 375 375 425 425 475 300 350 350 400 400 450 375 425 425 475 475 525 - 400 mm with below contactor
Number
of poles
2 325 375 375 425 425 475 400 450 450 500 500 550 375 425 425 475 475 525 450 500 500 550 550 600
3 400 450 450 500 500 550 475 525 525 575 575 625 450 475 475 525 525 575 500 550 550 600 600 650 - 575 mm with below contactor
of calibre 800 or 1000 A.
4 450 500 500 550 550 600 525 575 575 625 625 675 500 550 550 600 600 650 575 625 625 675 675 725 CM 16 R: magnetic circuit can be
mounted on the left side of the
Contacteur avec accrochage mécanique à simple déverrouillage électrique et manuel contactor. Without any informa-
tion, it will always be mounted on
Contactor with «mechanical latching with single electrical and manual release» the right.
A dimension locking possibility on the right extremity (AV) locking possibility on the left extremity (V) D: D type auxiliary contact blocks.
(mm) without delayed contact with delayed contact without delayed contact with delayed contact Disp + M: device used for DC or
rectified AC control circuit. Stand-
Number of ard contents: one support with
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6
M type blocks terminal box, economy resistor(s),
1 350 375 375 425 425 475 400 450 450 500 500 550 375 425 425 475 475 525 450 500 500 550 550 600 rectifier for alternating current and
Number
of poles
2 475 525 525 575 575 625 550 600 600 650 650 700 525 575 575 575 575 675 600 650 650 700 700 750 type» lock for locking the contac-
tor at rest (lock not supplied).
3 550 600 600 650 650 700 625 675 675 725 725 775 600 650 650 700 700 750 675 725 725 775 775 825 TF: attachment holes.
4 625 675 675 725 725 775 700 750 750 800 800 850 675 700 700 750 750 800 725 775 775 825 825 875 TP: delayed auxiliary contact
block.
(1) form to be specified. Please advise when you order whether the contactor has to be V: possible mechanical locking
(2) X is the number of closing poles.
equipped with the «shaft end» - necessary to adapt a possible facility with a 80, 150, 200 and
(3) for contactor equipped with DC or rectified AC supplied coil. 1250 to 5000 A contactor or with
∆ for LEN version, please advise the position of the contactor on the bar. mechanical locking device. CBA-CBFC 55 400 to 1000 A old
Control circuit: for connection drawings, see p. 144 Without information, the contactor will be delivered without it. generation contactors.
§07.CB 400 à 1000_GB Page 48 Mercredi, 26. avril 2000 9:48 09
16. CBA - CBFC 75 500 and 630 x.0(4)
PG TP R M Disp ACC D
M M + M Metallic walls
PC connecting sections
118
105 75
22.5
15 (5)
12 40
25
37.5
14 60 37.5
modular contactors
V AV 200 200
125
CM
10
TF
125
37.5
38
52.5 30 141 PC
12.5 L1 80 80 20 37.5
S 12.5 258 Ø 12 32
2 350(2) 400(2) 400(2) 450(2) 450(2) 500(2) 400(2) 450(2) 450(2) 500(2) 500(2) 550(2) 400(2) 425(2) 425(2) 475(2) 475(2) 525(2) 450(2) 500(2) 500(2) 550(2) 550(2) 600(2)
- 575 mm with below contactor
3 425(2) 475(2) 475(2) 525(2) 525(2) 575(2) 500(2) 550(2) 550(2) 600(2) 600(2) 650(3) 475(2) 525(2) 525(2) 575(2) 575(2) 625(2) 525(2) 575(2) 575(2) 625(2) 625(2) 675(2) of calibre 800 or 1000 A.
4 500(2) 550(2) 575(3) 625(3) 625(3) 675(3) 600(3) 650(3) 650(3) 700(3) 700(3) 750(3) 550(2) 600(2) 625(3) 675(3) 675(3) 725(3) 650(3) 700(3) 700(3) 750(3) 750(3) 800(3) CM: magnetic circuit can be
mounted on the left side of the
Contactor with «mechanical latching with single electrical and manual release» contactor. Without any informa-
tion, it will always be mounted on
A dimension locking possibility on the right extremity (AV) locking possibility on the left extremity (V) the right.
(mm) without delayed contact with delayed contact without delayed contact with delayed contact D: D type auxiliary contact blocks.
Number of Disp + M: device used for DC or
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 rectified AC control circuit. Stan-
M type blocks dard contents: one support with
1 350(2) 400(2) 400(2) 450(2) 450(2) 500(2) 400(2) 450(2) 450(2) 500(2) 500(2) 550(2) 400(2) 425(2) 425(2) 475(2) 475(2) 525(2) 450(2) 500(2) 500(2) 550(2) 550(2) 600(2) terminal box, economy resistor(s),
Number
of poles
2 425(2) 475(2) 475(2) 525(2) 525(2) 575(2) 500(2) 550(2) 550(2) 600(2) 600(2) 650(2) 475(2) 525(2) 525(2) 575(2) 575(2) 625(2) 525(2) 575(2) 575(2) 625(2) 625(2) 675(2) rectifier for alternating current and
one M type auxiliary contact
3 500(2) 550(2) 550(2) 600(2) 600(2) 650(2) 575(2) 625(2) 625(2) 675(2) 675(2) 725(2) 550(2) 600(2) 600(2) 650(2) 650(2) 700(2) 625(2) 675(2) 675(2) 725(2) 725(2) 775(2) block.
4 575(2) 650(3) 650(3) 700(3) 700(3) 750(2) 675(3) 725(3) 725(3) 775(3) 775(3) 825(2) 625(2) 700(3) 700(3) 750(3) 750(3) 800(3) 700(3) 750(3) 750(3) 800(3) 800(3) 850(3) L1: - without locking possibility
on the left extremity: 45 mm,
Contactor with «mechanical latching with double electrical and manual release» - with locking possibility on
the left extremity: 90 mm.
A dimension locking possibility on the right extremity (AV) locking possibility on the left extremity (V) M: M type auxiliary contact
(mm) without delayed contact with delayed contact without delayed contact with delayed contact blocks(1).
Number of PC: closing pole.
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 PF: attachment plane, LER version.
M type blocks
PG: left bearing.
1 425 475 475 525 525 575 475 525 525 575 575 625(2)
(2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) 475(2) 500(2) 500(2) 550(2) 550(2) 600(2) 525(2) 575(2) 575(2)
675(2) 625(2) 625(2)
R: possible auxiliary relays.
Number
of poles
2 500(2) 550(2) 550(2) 600(2) 600(2) 650(2) 575(2) 625(2) 625(2) 675(2) 675(2) 725(2) 550(2) 600(2) 600(2) 650(2) 650(2) 700(2) 600(2) 650(2) 650(2) 700(2) 700(2) 750(2) S: metallic support for «Ronis
3 575(2) 625(2) 625(2) 675(2) 675(2) 725(2) 650(2) 700(2) 700(2) 750(2) 750(2) 800(2) 625(2) 675(2) 675(2) 725(2) 725(2) 775(2) 700(2) 750(2) 750(2) 800(2) 800(2) 850(2) type» lock for locking the contac-
tor at rest (lock not supplied).
4 650(2) 725(3) 725(3) 775(3) 775(3) 825(3) 750(3) 800(3) 800(3) 850(3) 850(3) 900(3) 700(2) 775(3) 775(3) 825(3) 825(3) 875(3) 775(3) 825(3) 825(3) 875(3) 875(3) 925(3)
TF: attachment holes.
(1) form to be specified. TP: delayed auxiliary contact
(2) magnetic circuit n° 16 R. block.
(3) magnetic circuit n° 18. Please advise when you order whether the contactor has to be
(4) X is the number of closing poles. equipped with the «shaft end» - necessary to adapt a possible V: possible mechanical locking
(5) for contactor equipped with DC or rectified AC supplied coil. facility with a 80, 150, 200 and
mechanical locking device.
∆ for LEN version, please advise the position of the contactor on the bar. 1250 to 5000 A contactor or with
Control circuit: for connection drawings, see p. 144. Without information, the contactor will be delivered without it. CBA-CBFC 55 400 to 1000 A old
generation contactors.
§07.CB 400 à 1000_GB Page 49 Mercredi, 26. avril 2000 9:48 09
17. CBA - CBFC 75 800 and 1000 x.0(2)
Metallic walls PC connecting sections
PG TP R M Disp ACC D
185 25
M M + M
118 149
Ø 11 22.5 112 25
15 68
37.5 25
14 16
modular contactors
37.5
85
V AV 200 200
125
CM 18 10
TF
125
37.5
33
52.5 30 141 PC
50
L1 92 92 20
S 295 37.5
12.5 12.5
LER version: z = A + 25 mm (reduced dimensions) 20
AP PF
Contactor without «mechanical latching with electrical and manual release» ACC: mechanical latching with sin-
A dimension locking possibility on the right extremity (AV) locking possibility on the left extremity (V) gle or double release.
(mm) without delayed contact with delayed contact without delayed contact with delayed contact AP: pole axis.
AV: mechanical locking axis, atta-
Number of chment centre-to-centre distance
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6
M type blocks between two superimposed con-
49
1 325 375 375 425 425 475 375 425 425 475 475 525 350 400 400 450 450 500 425 475 475 525 525 575 tactors:
Number
of poles
2 475 525 525 575 575 625 550 600 600 650 650 700 525 550 550 600 600 650 575 625 625 675 675 725 terminal box, economy resistor(s),
rectifier for alternating current and
3 575 625 625 675 675 725 650 700 700 750 750 800 600 650 650 700 700 750 675 725 725 775 775 825 one M type auxiliary contact block.
4 675 725 • • • • 725 • • • • • 700 750 • • • • 750 • • • • • L1: - without locking possibility on
the left extremity: 45 mm,
Contactor with «mechanical latching with double electrical and manual release» - with locking possibility on
the left extremity: 90 mm.
A dimension locking possibility on the right extremity (AV) locking possibility on the left extremity (V) M: M type auxiliary contact blocks(1).
(mm) without delayed contact with delayed contact without delayed contact with delayed contact PC: closing pole.
Number of PF: attachment plane, LER version.
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 PG: left bearing.
M type blocks
R: possible auxiliary relays.
1 475 525 525 575 575 625 525 575 575 625 625 675 500 550 550 600 600 650 550 600 600 650 650 700
S: metallic support for «Ronis type»
Number
of poles
2 550 600 600 650 650 700 625 675 675 725 725 775 600 625 625 675 675 725 650 700 700 750 750 800 lock for locking the contactor at
3 650 700 700 750 750 800 725 775 775 825 825 875 675 725 725 775 775 825 750 800 800 850 850 900 rest (lock not supplied).
TF: attachment holes.
4 750 800 • • • • 800 • • • • • 775 825 • • • • 825 • • • • •
TP: delayed auxiliary contact block.
• consult us. V: possible mechanical locking faci-
(1) form to be specified. Please advise when you order whether the contactor has to be lity with a 80, 150, 200 and
(2) X is the number of closing poles. equipped with the «shaft end» - necessary to adapt a possible 1250 to 5000 A contactor or with
∆ for LEN version, please advise the position of the contactor on the bar.
Control circuit: for connection drawings, see p. 144. mechanical locking device. CBA-CBFC 55 400 to 1000 A old
Without information, the contactor will be delivered without it. generation contactors.
§07.CB 400 à 1000_GB Page 50 Mercredi, 26. avril 2000 9:48 09
18. CBFC 75 400 to 1000 2.0
PC connecting sections
PG PC TP R M Disp ACC D Calibres 800/1000
M M + M M
Calibres 400/500/630
15 25
22.5 H2 25
B 77,5 25
30
105,5
16 25
10 N
modular contactors
125
125 V AV 125 Ø 12 125
CM 10
32 50
65,5 Ø8
H1 60,5
10
67.5 30 141 PC 28 10
AP
12,5 12,5
L1 L2 S P AP
Ue: 1000 VÜ
Modular DC contactors, 2 poles, double insulation
Overall dimensions CBFC 75 400 to 1000 A
CB 75 400 to 1000 A
PF PF
C = 6 for 400, B = 13 for 400,
A 8 for 500 / 630. 12 for 500 / 630.
LEN version: z = A + 135 mm or more on request ∆
modular contactors
V AV 125
125 125
CM Ø 12 125
10
32 50
H1 65,5 Ø8
60,5
67,5 30 141 PC 10
28 10
S P AP
L1 L2 L2 12,5 12,5
Ue : 1000 VÜ
Modular DC contactors, 3 poles, double insulation.
Overall dimensions CBFC 75 400 to 1000 A
CB 75 400 to 1000 A
AP PF
PF
A
C = 6 for 400, B = 13 for 400,
Version LEN : z = A + 135 mm ou plus sur demande ∆ 8 for 500 / 630. 12 for 500 / 630.
ACC: mechanical latching with single or double
Contactor without «mechanical latching with electrical and manual release» release.
locking possibility on the right extremity (AV) locking possibility on the left extremity (V) AP: pole axis.
A dimension (mm) AV: mechanical locking axis, attachment centre-to-
without delayed contact with delayed contact without delayed contact with delayed contact centre distance between two superimposed con-
Number of M type blocks 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 tactors:
Number of poles 2 closing poles on the positive polarity to be connected in series and 1 closing pole on the negative polarity - 400 mm with below contactor of calibre 400,
500, and 630 A.
Calibre 400 A 500 550 550 600 600 550 575 575 625 625 600 650 650 700 700 - 575 mm with below contactor of calibre 800 or
Calibres 500 & 630 A 550 600 600 650 650 600 650 650 700 700 600 625 625 675 675 650 700 700 750 750 1000 A.
51
Calibres 800 & 1000 A 650* 675* 675* 725* 725* 700* 750* 750* 800* 800* 675* 725* 725* 775* 775 725* 775* 775* 825* 825* CM: magnetic circuit can be mounted on the left
side of the contactor. Without any information, it
will always be mounted on the right.
Contactor with «mechanical latching with single electrical and manual release» D: D type auxiliary contact blocks.
locking possibility on the right extremity (AV) locking possibility on the left extremity (V) Disp + M: device used for DC or rectified AC con-
A dimension (mm) trol circuit. Standard contents: one support with
without delayed contact with delayed contact without delayed contact with delayed contact terminal box, economy resistor(s), rectifier for alter-
Number of M type blocks 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 nating current and one M type auxiliary contact
block.
Number of poles 2 closing poles on the positive polarity to be connected in series and 1 closing pole on the negative polarity M: M type auxiliary contact blocks(1).
Calibre 400 A 575 625 625 675 675 650 700 700 750 750 625 675 675 725 725 700 750 750 800 800 PC: closing pole.
Calibres 500 & 630 A 625 675 675 725 725 700 750 750 800 800 675 725 725 775 775 725 775 775 825 825 PF: attachement plane, LER version.
Calibres 800 & 1000 A 725* 750* 750* 800* 800* 775* 825* 825* 875* 875* 750* 800 800 850 850 800* 850* 850* 900* 900* PG: left bearing.
R: possible auxiliary relays.
S: metallic support for «Ronis type» lock for locking
Contactor with «mechanical latching with double electrical and manual release» the contactor at rest (lock not supplied).
locking possibility on the right extremity (AV) locking possibility on the left extremity (V) SE: separator.
A dimension (mm) TP: delayed auxiliary contact block.
without delayed contact with delayed contact without delayed contact with delayed contact
V: possible mechanical locking facility with a 80,
Number of M type blocks 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 150, 200 and 1250 to 5000 A contactor or with
Number of poles 2 closing poles on the positive polarity to be connected in series and 1 closing pole on the negative polarity CBA-CBFC 55 400 to 1000 A old generation con-
tactors.
Calibre 400 A 650 700 700 750 750 725 775 775 825 825 700 750 750 800 800 775 825 825 875 875
Calibres 500 & 630 A 700 750 750 800 800 775 825 825 875 875 750 800 800 850 850 800 850 850 900 900 L1 mecha- Safety
nical locking (2)
Calibres 800 & 1000 A 800* 825* 825* 875* 875* 850* 900* 900* 825* 875* 875* 875* Calibre possibility V L2 perimeter
with- with
∆ for LEN version, please advise the position of the contactor on the bar. out M N
* magnetic circuit n° 18.
(1) form to be specified. Please advise when you order whether the contactor has to be 400 62 107 102 45 45
(2) with metallic walls. equipped with the «shaft end» - necessary to adapt a possible
Control circuit: for connection drawings, see p. 144. 500/630 65 110 120 75 60
mechanical locking device.
800/1000 89 118 138 185 85
Without information, the contactor will be delivered without it.
Calibre H1 H2 P
400 75.5 112.5 258
500/630 75.5 112.5 258
800/1000 70.5 186.5 295
§07.CB 400 à 1000_GB Page 52 Mercredi, 26. avril 2000 9:48 09
20. CBFC 75 400 to 1000 4.0
PG PC SE PC TP R M Disp ACC D
PC connecting sections
M M + M M Calibres 400/500/630 Calibres 800/1000
22.5 H2
30 25
B 77,5 25
105,5
16 25
10 N
modular contactors
V AV 125
125 125
CM Ø 12 125
10
32 50
H1 65,5 Ø8
60,5
67.5 30 141 10
28 10
L1 L2 L2 L2 P AP
S 12,5 12,5
Ue : 1000 VÜ
Modular 1000 V DC contactors, 4 pole, double isulation,
Overall dimensions CBFC 75 400 to 1000 A
CB 75 400 to 1000 A
AP PF
PF
A C = 6 for 400, B = 13 for 400,
LEN version: z = A + 135 mm or more on request ∆ 8 for 500 / 630. 12 for 500 / 630.
Calibres 800 & 1000 A 775* 825* 800* 850* CM: magnetic circuit can be mounted on the left side
of the contactor. Without any information, it will
always be mounted on the right.
A dimension (mm) locking possibility on the right extremity (AV) locking possibility on the left extremity (V) D: D type auxiliary contact blocks.
without delayed contact with delayed contact without delayed contact with delayed contact Disp + M: device used for DC or rectified AC control
Number of M type blocks 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 circuit. Standard contents: one support with terminal
box, economy resistor(s), rectifier for alternating cur-
Number of poles 2 poles to be connected in series on the positive polarity and 2 poles to be connected in series on the negative polarity rent and one M type auxiliary contact block.
Calibre 400 A 675 725 725 775 775 750 800 800 850 850 725 775 775 825 825 800 850 850 900 900 M: M type auxiliary contact blocks(1).
Calibres 500 & 630 A 750 800* 800* 850* 850* 825* 875* 875* 800 850* 850* 900* 900* 875* PC: closing pole.
PF: attachement plane, LER version.
Calibres 800 & 1000 A 850* 900* 875*
PG: left bearing.
A dimension (mm) locking possibility on the right extremity (AV) locking possibility on the left extremity (V) R: possible auxiliary relays.
S: metallic support for «Ronis type» lock for locking
Contactor with «mechanical latching with double electrical and manual release» the contactor at rest (lock not supplied).
SE: separator.
locking possibility on the right extremity (AV) locking possibility on the left extremity (V) TP: delayed auxiliary contact block.
A dimension (mm)
without delayed contact with delayed contact without delayed contact with delayed contact V: possible mechanical locking facility with a 80, 150,
Number of M type blocks 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 200 and 1250 to 5000 A contactor or with CBA-
CBFC 55 400 to 1000 A old generation contactors.
Number of poles 2 poles to be connected in series on the positive polarity and 2 poles to be connected in series on the negative polarity
Calibre 400 A 750 800 800 850 850 825 875 875 925 925 800 850 850 800 900 875 925 925 L1 mecha-
nical locking Safety
Calibres 500 & 630 A 825 875* 875* 900* 875* 925* 925* perimeter(2)
Calibre possibility V L2
Calibres 800 & 1000 A 925*
with- with M N
out
∆ for LEN version, please advise the position of the contactor on the bar.
* magnetic circuit n° 18. 400 62 67 102 45 45
(1) form to be specified. Please advise when you order whether the contactor has to be
(2) with metallic walls. 500/630 65 110 120 75 60
equipped with the «shaft end» - necessary to adapt a possible
Control circuit: for connection drawings, see p. 144.
mechanical locking device.
800/1000 89 118 138 185 85
Without information, the contactor will be delivered without it.
Calibre H1 H2 P
400 75.5 112.5 258
500/630 75.5 112.5 258
800/1000 70.5 186.5 295
§07.CB 400 à 1000_GB Page 53 Mercredi, 26. avril 2000 9:48 09
21. CBFC 75 400 to 1000 2.1
M
PC connecting sections
Calibres 400/500/630 Calibres 800/1000
modular contactors
30
10 125
H1 PC Ø 12 125
V AV P
125
CM 15 Ø 12
10 32 50
65,5 Ø8
60,5
112 10
77
28 10
Number of M type blocks 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 - 575 mm with below contactor of calibre 800 or 1000 A.
Number of poles 2 closing poles to be connected in series and one opening pole 400 A without mechanical overlapping CM: magnetic circuit can be mounted on the left side of
the contactor. Without any information, it will always be
Calibre 400 A 525 550 550 600 600 575 625 625 675 675 550 600 600 650 650 625 675 675 725 725 mounted on the right.
Calibre 500 & 630 A 550 600 600 650 650 625 675 700* 750* 750* 575 625 625 675 675 650 700 725* 775* 775* D: D type auxiliary contact blocks.
Calibre 800 & 1000 A 625* 675* 675* 725* 725* 700* 750* 750* 800* 800* 650* 700* 700* 750* 750* 725* 775* 775* 825* 825* Disp + M: device used for DC or rectified AC control cir-
cuit. Standard contents: one support with terminal box,
economy resistor(s), rectifier for alternating current and
Contactor with «mechanical latching with single electrical and manual release» one M type auxiliary contact block.
locking possibility on the right extremity (AV) locking possibility on the left extremity (V) M: M type auxiliary contact blocks(1).
A dimension (mm) PC: closing pole.
without delayed contact with delayed contact without delayed contact with delayed contact
PF: attachement plane, LER version.
Number of M type blocks 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 PG: left bearing.
Number of poles 2 closing poles to be connected in series and one opening pole 400 A without mechanical overlapping R: possible auxiliary relays.
Calibre 400 A 600 650 650 700 700 675 725 725 775 775 625 675 675 725 725 700 750 750 800 800 S: metallic support for «Ronis type» lock for locking the
contactor at rest (lock not supplied).
Calibre 500 & 630 A 625 675 675 725 725 700 750 750* 800* 800* 650 700 700 750 750 725 775 800* 850* 850* SE: separator.
Calibre 800 & 1000 A 700* 750* 750* 800* 800* 775* 825* 825* 875* 875* 725* 775* 775* 825* 825* 800* 850* 850* 900* 900* TP: delayed auxiliary contact block.
V: possible mechanical locking facility with a 80, 150, 200
and 1250 to 5000 A contactor or with CBA-CBFC 55 400
Contactor with «mechanical latching with double electrical and manual release» to 1000 A old generation contactors.
locking possibility on the right extremity (AV) locking possibility on the left extremity (V) L1 mechani-
A dimension (mm) Safety
without delayed contact with delayed contact without delayed contact with delayed contact cal locking perimeter(2)
Number of M type blocks 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 Calibre possibility V L2 L3
Number of poles 2 closing poles to be connected in series and one opening pole 400 A without mechanical overlapping with- with
out M N
Calibre 400 A 675 725 725 775 775 750 800 800 850 850 700 750 750 800 800 775 825 825 875 875
Calibre 500 & 630 A 700 750 750 800 800 775 825 825* 875* 875* 725 775 775 825 825 800 850 875* 925* 925* 400 77.5 107.5 105 102 45 45
Calibre 800 & 1000 A 775* 825* 825* 875* 875* 850* 900* 900* 800* 850* 850* 900* 900* 875* 925* 925* 500/630 77.5 107.5 112.5 120 75 60
800/1000 77.5 107.5 135 138 185 85
∆ for LEN version, please advise the position of the contactor on the bar. Please advise when you order whether the contactor has to be
* magnetic circuit n° 18. equipped with the «shaft end» - necessary to adapt a possible Calibre H1 H2 P
(1) form to be specified. mechanical locking device. 400 75.5 112.5 258
(2) with metallic walls.
Control circuit: for connection drawings, see p. 144. Without information, the contactor will be delivered without it. 500/630 75.5 112.5 258
800/1000 70.5 186.5 295
§07.CB 400 à 1000_GB Page 54 Mercredi, 26. avril 2000 9:48 09
22. CBFC 75 400 à 1000 3.1
M PC connecting sections
Calibres 400/500/630 Calibres 800/1000
13 5
N 25
22.5 B 77,5 25
30 105,5
125 16 25
modular contactors
10
125
V AV H2 PC 125
125 Ø 12
CM
10
P
15 Ø 12
32 50
65,5 Ø8
112 60,5
30 77 10
141 10
AP 28
95 80
PF 49 Ø 12
ACC: mechanical latching with single or double release.
Contactor without «mechanical latching with electrical and manual release» AP: pole axis.
AV: mechanical locking axis, attachment centre-to-centre
locking possibility on the right extremity (AV) locking possibility on the left extremity (V) distance between two superimposed contactors:
A dimension (mm)
without delayed contact with delayed contact without delayed contact with delayed contact - 400 mm with below contactor of calibre 400, 500, and
Number of M type blocks 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 630 A.
54