Professional Documents
Culture Documents
Week 3 Problems
Week 3 Problems
Week 3 Problems
This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
6–9.
6–10. 6–9
253
© 2020 Pearson Education Ltd. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
265
© 2020 Pearson Education Ltd. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
6–38. Draw the influence line for the force in (a) member CJ,
and (b) member DJ.
Prob. 6-38
279
© 2020 Pearson Education Ltd. All rights reserved. This material is protected under all copyright laws as they currently exist.
No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
*6–68. The truck and trailer exerts the wheel reactions shown
*6–64. 6 kN
on the deck of the girder bridge. Determine the largest moment 4 kN
2 kN
it exerts in the splice at C. Assume the truck travels left to right 1 kN
along the center of the deck, and therefore transfers half of the
load shown to each of the two side girders. Assume the splice is
a fixed connection and, like the girder, can support both shear A C B
and moment. 1.5 m 2 m 10 m 5m
1m
SOLUTION
Worst case is 6 kN at P = 10 m.
Ans.
(MC) max = 18.25 kN # m
305