Professional Documents
Culture Documents
Fujitsu FTR B3GA4.5Z B10 Datasheet
Fujitsu FTR B3GA4.5Z B10 Datasheet
Fujitsu FTR B3GA4.5Z B10 Datasheet
■ FEATURES
● These are flat type ultra miniature (SMT), 5.2±0.2mm height
(through hole) relays for telecommunication and data
networking equipments, made of high heat resistant material,
which can support IRS and VPS methods.
● Ultra slim and light weight with a 5.25±0.2 mm height and
approximately 0.8 g weight, and an 87mm2 mounting area.
Most suitable for decreasing size and weight, space saving
and high density packaging of equipment.
● Contact spring has superb high frequency characteristics.
● High insulation design conforming to the Bellcore, FCC
standard, with a minimum of 1.6 mm between coil and
contacts insulation distance, an AC 1.5kV coil contact
withstand voltage, and a 2.5kV coil-contact withstand surge
voltage.
● High efficieny polar electromagnet structure implements
a140mW low coil power consumption. A power saving latch
type is also available.
● Gold-plated silver alloy bifurcated contacts having high
contact reliability.
● UL, CSA recognized. Confirms to IEC 60950, UL1950,
EN60950. Spacing & high breakdown voltage (Basic
insulation, 150 working volts, pollution degree 2).
● RoHS compliant since date code: 0431B8
Please see page 10 for more information
1
FTR-B3 Series
■ ORDERING INFORMATION
FTR-B3 G B 012 Z -B 10
[Example]
(a) (b) (c) (d) (e) (f ) (g)
Remarks: Actual marking on relay would not carry code FTR and be as below:
Ordering code Actual marking
FTR-B3GA012Z-B10 → B3GA012Z
Note: *: - Only surface mount types (G and S) are applicable
- All relays are packaged in tubes unles P/N ends with -B10
2
FTR-B3 Series
* Pulse driven
Note: All values in the table are measured at 20˚C.
* Pulse driven
Note: All values in the table are measured at 20˚C.
3
FTR-B3 Series
■ SPECIFICATIONS
Standard Type Latching Type
Item
FTR-B3 ( ) A FTR-B3 ( ) B
Arrangement 2Form C
Contact material Gold overlay silver alloy
Contact type Bifurcated contacts (cross-bar)
Contact resistance (initial value) 75mΩ , maximum at 6VDC 1A
Contact rating 30VDC 1A, 125VAC 0.3A (resistive)
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the
actual load before production since reference values may vary according to switching frequencies, environmental
conditions and expected reliability levels.
continued
4
FTR-B3 Series
■ SPECIFICATIONS
continued
Mechanical 50 x 106 operations min. (at 3Hz) 20 x 106 operations min.(at 3Hz)
Life 100 x 103 operations min. at 1A 30VDC (at 0.5Hz)
Electrical (resistive load)
100 x 103 operations min. at 0.3A 125VDC (at 0.5Hz)
,
,,
resistance Endurance Min. 1000 m/s2
Weight Approximately 0.8g
■ CHARACTERISTIC DATA
90
4 4
Time (ms)
Time (ms)
80
3 3
70
2 2 At set/reset
Operation time 60
Set time
1 1
50
Reset time
Release
40
0 0.1 0.2 0.3 0 0.1 0.2 0.3 0.5 1 2 5 10 20 50 100 200
80 2.2 2.2
Contact carrying C
cu onta
Co rre
2.0 current: 0
cu
rre ct
nt nt:
2.0
ac 1
Co nt ca
: 1 rry
tc A
rre ct
ry
nt: ca
in
1.6 1A rryi
g
1.6
ng
40 1.4 1.4
Contact carrying 1.2 1.2
ltage oltage
current: 1A ng vo
ti ting V
1.0 Opera il) 1.0 Opera )
o o il
20 (hot c (ho t c
ge
Contact carrying 0.8
ting vo
lta 0.8 g Voltage
Opera il) Operatin
current: 0 o il)
0.6 (c o o l c 0.6 (cool co
0 0 20 40 60 80 100
0 0.1 0.2 0.3 0 20 40 60 80 100
continued
5
FTR-B3 Series
■ CHARACTERISTIC DATA
continued
Operation (x104)
1 50
40
z{ ,yz|}
30
30 VD
C
0.5 Re
sis
12
DC Resistive 20 tiv
5V
e
DC
0.3
Re
s
0.2 10
ist
ive
0.1 0 0.2 0.4 0.6 0.8 1.0 1.2
1 2 5 10 20 30 50 100 200
■ REFERENCE DATA
~
|
Distribution of Operate Distribution of Operate Distribution of Operate
and Release Voltage and Release Voltage and Release Time
100 100 100
FTR-B3GA4.5Z FTR-B3GB4.5Z FTR-B3GA4.5Z
n=100 n=100 n=100
Operate Operate Operate
80 80 Release 80
Release Release
Distribution (%)
Distribution (%)
Distribution (%)
60 60 60
40 40
40
20
20 20
0 10 20 30 40 50 60 70 80
0 10 20 30 40 50 60 70 80 0 1 2 3 4 5
Nominal Voltage Multiplying Factor (%) Nominal Voltage Multiplying Factor (%) Time (ms)
Distribution (%)
Release Break
40
Release Voltage
60 60 20
0 FTR-B3GA4.5Z
500 n=8
40 40 1200 operations/min.
100
50
20 20 Make
10
5 Break
continued
6
FTR-B3 Series
■ SPECIFICATIONS
continued
Nominal Voltage
Nominal Voltage
Nominal Voltage
FTR-B3GA4.5Z
80 80 n=4 type
10
Operating Voltage Operating Voltage
60 60
0
Operating Voltage
40 40
Release Voltage Release Voltage -10
20 20
FTR-B3GA4.5Z FTR-B3GA4.5Z -20
0 n=8 0 n=8
Resistance (m‰)
Resistance (m‰)
20
500 30 operations/min. 500 30 operations/min.
126 VAC 0.3 A 30 VAC 1A 10 When coil
Nominal Voltage
100 (resistive load) 100 (resistive load) is ON
50 50
0 When coil
Contact
Contact
Make Release Voltage is OFF
10 10 Make
5 Break 5 Break -10
1 1 -20
Initial 10 Initial 10 0 2 4 6 8 10
Operation (x104) Operation (x104) Distance between relays I (mm)
0 1.4
-20 1.0
20
0.8
10 When coil
50
Nominal Voltage
0.6
is ON
0 When coil
0.4
Release Voltage is OFF
-10 0.2
-20 0 0
0 2 4 6 8 10 1 3 5 7 10 30 50 70 100 300 500 700 1000 1 3 5 7 10 30 50 70 100 300 500700 1000
Distance between relays I (mm) Frequency (MHz) Frequency (MHz)
■ DIMENSIONS
FTR-B3C( )( )( )
-0.2
3.5 +0.3
8 7 6 5
(-)
3.2 2.2 2.2 Marking
(Coil side indication)
Unit: mm
7
FTR-B3 Series
■ DIMENSIONS
FTR-B3G( )( )( )
● Dimensions
5.25 ±0.02
0.2 +0.2
1.05
0.4 +0.2 5.08±0.2
(1.5) 3.2 ±0.2 2.2 ±0.2 2.2 ±0.2 8.2 +0.5
-0.3
6.64
1 2 3 4
2.56
(+)
Marking
3.2 2.2 2.2 (Coil side indication)
Unit: mm
FTR-B3S( )( )( )
1.05
6.14
1 2 3 4
2.08
(+)
Marking
3.2 2.2 2.2
(Coil side indication) Unit: mm
8
FTR-B3 Series
Temperature (°C)
soldering
T3 T 3 = 245°C max. T 3 = 200°C maximum
T 2 = 200°C max. 215°C maximum soldering T 2 = 165°C maximum
T2 T3
cooling T 1 = 165°C max. T 1 = 100°C maximum
preheating cooling
T1 T2
preheating
T1
0 30 sec 0
120 sec maximum 60 sec Max.
Max.
60 sec Max. 90 sec Max.
■ PRECAUTIONS
- For details on general precautions, refer to the section on technical descriptions.
- Since this is a polar relay, follow the instructions of the internal wiring diagram for the +- connections of the coil.
- Note that the terminal array and internal wiring of the surface mount relay are a top view
9
FTR-B3 Series
130
3. Moisture Sensitivity
● Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
● SnAgCu solder is known as low riskof tin whisker. No considerable length whisker was found by our in-house
test.
5. Solid State Relays
● Each lead terminal will be changed from solder plating to Sn plating and Nickel plating. A layer of Nickel plating
is between the terminal and the Sn plating to avoid whisker. 10
FTR-B3 Series
Japan Europe
Fujitsu Component Limited Fujitsu Components Europe B.V.
Gotanda-Chuo Building Diamantlaan 25
3-5, Higashigotanda 2-chome, Shinagawa-ku 2132 WV Hoofddorp
Fujitsu Components Tokyo 141, Japan Netherlands
Tel: (81-3) 5449-7010 Tel: (31-23) 5560910
International Fax: (81-3) 5449-2626 Fax: (31-23) 5560950
Email: promothq@ft.ed.fujitsu.com Email: info@fceu.fujitsu.com
Headquarter Web: www.fcl.fujitsu.com Web: www.fceu.fujitsu.com
Offices North and South America Asia Pacific
Fujitsu Components America, Inc. Fujitsu Components Asia Ltd.
250 E. Caribbean Drive 102E Pasir Panjang Road
Sunnyvale, CA 94089 U.S.A. #04-01 Citilink Warehouse Complex
Tel: (1-408) 745-4900 Singapore 118529
Fax: (1-408) 745-4970 Tel: (65) 375-8560
Email: marcom@fcai.fujitsu.com Fax: (65) 273-3021
Web: www.fcai.fujitsu.com Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
© 2005 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 04/25/2005.
11