Professional Documents
Culture Documents
MAINTENANCE
MAINTENANCE
1998-2004 ACCESSORIES & BODY, CAB Electrical System - Body - Maintenance - 170 Chassis
MAINTENANCE
CHECK WIPER BLADE - AP82.30-P-8253G
MODELS 124, 129, 140, 163, 164, 168, 169, 170, 171, 202, 203, 208, 209, 210, 211, 219, 215, 220, 230, 245,
251, 460, 461, 463, 414
Check
Risk of injury caused by Keep all body parts and AS00.00-Z-0009-01A
moving parts that can limbs away from moving
pinch, crush or , in mechanical components.
extreme cases even sever
extremities.
1 Inspect wiper blades Check rubber lip for
hardening, cracks and
wear, in case of
complaint: ?
Replace wiper blades
subject to a separate order.
MODELS 124, 129, 140, 168, 170, 202, 208, 210, 414
Windshield washer fluid reservoir for rear window T-model (except model 210)
Microsoft
Friday, October 30, 2009 9:48:35
9:48:31 AM Page 1 © 2005 Mitchell Repair Information Company, LLC.
2003 Mercedes-Benz SLK320
1998-2004 ACCESSORIES & BODY, CAB Electrical System - Body - Maintenance - 170 Chassis
Fig. 2: Identifying Windshield Washer Fluid Reservoir For Rear Window T-Model (Except Model 210)
Fig. 3: Identifying Windshield Washer Fluid Reservoir Filler Neck - Model 170
Check
1 Inspect fluid level in Refer to table on
windshield washer fluid package for mixing ratio.
reservoir, adjust to correct
level.
Windshield washer fluid Sheet 371.0 BB00.40-P-0371-00A
concentrate
MODEL 124, 129, 140, 168, 170, 202, 203, 208, 210, 215, 220, 230, 414
Microsoft
Friday, October 30, 2009 9:48:32 AM Page 2 © 2005 Mitchell Repair Information Company, LLC.
2003 Mercedes-Benz SLK320
1998-2004 ACCESSORIES & BODY, CAB Electrical System - Body - Maintenance - 170 Chassis
MODIFICATION NOTES
12.1.05 Remove key from ignition Step 1
lock, deleted
Check wiper blades of Step 2
windshield, deleted
Check wiper blades of rear Step 3.1
window, deleted
Check
Risk of injury in the form Always remove ignition AS82.30-Z-0001-01A
of trapping or crushing, or key when working on
even severing of limbs, if windshield wiper
caught in windshield mechanism.
wiper mechanism
1 Switch on ignition and If spray nozzles are
check spray nozzles of blocked: ?
windshield washer system Clean spray nozzles from
on windshield for proper outside using suitable
operation needle and compressed air.
2.1 Check function of spray Model 124 T-model
nozzle of windshield wagon, 168, 202 T-model
washer system on rear wagon, 203.2/7, 210.2
window For clogged up spray
nozzle: ?
Clean spray nozzle from
outside using suitable
needle and compressed air.
3 Check adjustment of all If necessary correct
spray nozzles of setting using
windshield wiper system adjusting drift.
Model 124, 129, 140, 168, AP82.35-P-8252-01BA
170, 202, 208, 210, 414
Model 203 AP82.35-P-8252-01P
Microsoft
Friday, October 30, 2009 9:48:32 AM Page 3 © 2005 Mitchell Repair Information Company, LLC.
2003 Mercedes-Benz SLK320
1998-2004 ACCESSORIES & BODY, CAB Electrical System - Body - Maintenance - 170 Chassis
MODEL 124
The spray jet must hit the glass surface in the marked area.
Fig. 7: Identifying Spray Jet Hit Position On Glass Surface - Model 124
MODEL 129
Microsoft
Friday, October 30, 2009 9:48:32 AM Page 5 © 2005 Mitchell Repair Information Company, LLC.
2003 Mercedes-Benz SLK320
1998-2004 ACCESSORIES & BODY, CAB Electrical System - Body - Maintenance - 170 Chassis
The spray jet should hit the glass surface in the marked area.
Fig. 8: Identifying Spray Jet Hit Position On Glass Surface - Model 129
Model 140
The spray jet must hit the glass surface in the marked area.
Fig. 9: Identifying Spray Jet Hit Position On Glass Surface - Model 140
The spray jet should hit the glass surface in the marked area.
Fig. 10: Identifying Spray Jet Hit Position On Glass Surface - Model 168,414
Microsoft
Friday, October 30, 2009 9:48:32 AM Page 6 © 2005 Mitchell Repair Information Company, LLC.
2003 Mercedes-Benz SLK320
1998-2004 ACCESSORIES & BODY, CAB Electrical System - Body - Maintenance - 170 Chassis
MODEL 170
The spray jet must hit the glass surface in the marked area.
Fig. 11: Identifying Spray Jet Hit Position On Glass Surface - Model 170
MODEL 202
The spray jet should hit the glass surface in the marked area.
Fig. 12: Identifying Spray Jet Hit Position On Glass Surface - Model 202
1 Correct windshield washer system spray nozzle settings if necessary using adjusting pin.
The spray jet must hit the windshield in the marked area.
Microsoft
Friday, October 30, 2009 9:48:32 AM Page 7 © 2005 Mitchell Repair Information Company, LLC.
2003 Mercedes-Benz SLK320
1998-2004 ACCESSORIES & BODY, CAB Electrical System - Body - Maintenance - 170 Chassis
Fig. 13: Identifying Spray Jet Hit Position On Glass Surface - Model 210
Microsoft
Friday, October 30, 2009 9:48:32 AM Page 8 © 2005 Mitchell Repair Information Company, LLC.