Professional Documents
Culture Documents
Wear Ring Pada Pompa
Wear Ring Pada Pompa
Products include:
• Single stage overhung pumps • Sealless magnetic drive
• Vertical in-line pumps pumps
• Single and multi-stage between bearing • Fire protection systems
pumps • Pitot tube pumps
• Multi-stage vertical pumps • Hydraulic decoking
• Reciprocating plunger pumps systems
GP Pump Line
Ruhrpumpen’s BB4, Ring Section Pump
The GP pump is a horizontal, between bearings, multi-stage, radially split, ring section type centrifugal pump. It is engineered to be
the most reliable and efficient pumping solution for the most demanding high-pressure and high-temperature applications across
many industries.
Its robust, yet compact, design, together with high efficiency hydraulics, provides superior performance and exceptional reliability
combined with ease of maintenance and minimal operating costs.
The GP line is available in non-API builds for the requirements of power plants and general industry specifications, and as API 610
11th edition (BB4 type) compliant for oil and gas applications. It is designed to meet group II, category 2 G and 3 (for use in zone 1
and 2) of the ATEX 94/9/C directive.
2
Performance Range
20 30 40 60 80 100 150 200 300 400 600 800 1000 1500 2000 3000 4000 Q Q [lmp.gpm)
8000 H
H
(m)
2000
6x4x13.5 8x6x15.5 10x
8x1
6000 (ft)
8x6x15 6.5
1500
6x4x
12.5 4000
8x6x13.5
6x3x11
5.5
1000 6x3x9.5
6x4x12
3000
x1
6x4x11 8x6x14
x8
800 8x6x12.5
10
4x2x8.5 6x3x10 6x4x11.5
max. 10 stages
600 2000
max. 11 stages
max. 11 stages
6x4x10
max. 10 stages
3x2x7.5
max. 12 stages
max. 12 stages
max. 12 stages
max. 12 stages
1500
TOTAL HEAD
400
max. 12 stages
max. 13 stages
max. 13 stages
max. 13 stages
max. 14 stages
max. 13 stages
300 1000
max. 13 stages
800
200
8x6x15.5
600
150 10x8x16.5
6x4x13.5
6x4x12.5 8x6x15 400
100
5.5
8x6x13.5
6x3x11 300
8x1
8x6x14
80 6x4x12
10x
8x6x12.5
6x4x11
60 6x3x9.5 6x4x11.5 200
6x3x10
4x2x8.5 6x4x10 150
40
3x2x7.5
30 100
80
20
Q [m^3/h)
4 6 8 10 15 20 30 40 60 80 100 150 200 300 400 600 800 1000 Q
Q [l/s]
15 2 3 4 6 8 10 15 20 30 40 60 80 100 150 200 300 Q
FLOW
6x3x9.5 6x4x12
x1
8x6x12.5
10
max. 10 stages
max. 11 stages
max. 12 stages
max. 12 stages
max. 12 stages
TOTAL HEAD
600 2000
max. 13 stages
max. 13 stages
max. 13 stages
max. 12 stages
max. 14 stages
1500
max. 13 stages
400
max. 13 stages
300 1000
8x6x15.5 800
10x8x16.5
200 6x4x13.5
8x6x15 600
6x4x12.5
150
5.5
8x6x13.5
6x3x11 400
8x1
8x6x14
6x4x12
10x
100 6x4x11
8x6x12.5
300
6x3x9.5 6x4x11.5
80 6x3x10
4x2x8.5 6x4x10
60 200
3x2x7.5 150
40
30 100
Q [m^3/h)
6 8 10 15 20 30 40 60 80 100 150 200 300 400 600 800 1000 1500 Q
Q [l/s]
2 3 4 6 8 10 15 20 30 40 60 80 100 150 200 300 400 Q
FLOW 3
HORIZONTAL, MULTI-STAGE, RING SECTION TYPE, PROCESS PUMP
4 1 8
3
5 Single row, cylindrical
roller, radial bearings
with splash oil
5
lubrication and constant
level oiler.
9 Stationary casing 10 R
wear rings and w
6 interstage
bushings are
8 Stacked rotor design with standard.
staggered keyways allows
interchangeable impellers
7 and sleeves.
7 Water cooled bearing housing.
Images for general arrangement use only, not certified for construction.
4
17 Low NPSH first stage
impeller. DESCRIPTION
• Horizontal, between bearings, centrifugal pump
16 Suction chamber with inlet • Multi-stage, radially split, single case
channel ensures perfect flow • Centerline mounted
distribution. • Ring section type pump
• Counter-clockwise rotation only
15 Straight bore shaft end
allows standard coupling
hub. BENEFITS
5
HORIZONTAL, MULTI-STAGE, RING SECTION TYPE, PROCESS PUMP
Balancing Disk:
The balancing disk design (illustrated in the pump section in previous page) is able to compensate 100% of the axial thrust along
the complete operating range, by means of a throttling gap and close axial clearance between the rotor-mounted disk and the
stationary part of the pump which is self-regulating as the rotor makes small adjustment in its position depending on the axial
thrust of the impellers.
As a result, this design does not require a thrust bearing and can be offered with a simple anti-friction or sleeve radial bearing, even
at very high powers, hence offering considerable cost and technical benefits compared with tilting pad thrust bearing.
Images for general arrangement use only, not certified for construction.
6
Compensated by a Balancing Disk or a Balancing Drum.
Balancing Drum:
The balance drum compensates up to 90% of axial forces by means of a close radial clearance. This design is particularly suitable
for applications where the pumped fluid contains solids and where full API 610 compliance is required.
Anti-friction thrust bearing arrangement is available for lower powers, as well as hydrodynamic (tilting pad) thrust bearings for
higher powers. Where tilting pad bearings are required Ruhrpumpen has many years of experience to allow us to specify and design
a complete package including lubrication system suitable for the application.
1
1 Water cooled
bearing housing.
6
5 Axial split bearing housing
for forced feed lubrication.
5
Images for general arrangement use only, not certified for construction.
7
HORIZONTAL, MULTI-STAGE, RING SECTION TYPE, PROCESS PUMP
INTERSTAGE TAKE-OFF
SHAFT DESIGN
8
AFTERMARKET SERVICES
Benefits:
• Maximized throughput
3D Redesigned Part • Optimized total cost of ownership
• Reduced energy consumption
• Extended run-time
• Short downtime as compared to acquiring a new pump
At the heart of the power generation process, the Boiler Feed Water Pump (BFP) plays an essential role, feeding high pressure
and high temperature water to a steam generator, such as a Boiler or HRSG (Heat Recovery Steam Generator).
Ruhrpumpen has recognized the demand for the highest levels of up-time in designing our GP pump which is ideally suited to
this demanding (high temperature, high pressure) service – particularly in combined cycle plants where severe cycling and
thermal transients can occur. Its compact design, high efficiency, investment cast hydraulics and optimized clearances provide
superior performance and exceptional reliability combined with easy maintenance and minimal operating costs.
10
Ruhrpumpen has a complete offering for Power Plant pumping needs!
11
+65 years creating the pumping technology that moves our world
Ruhrpumpen is an innovative and efficient pump technology company that offers highly-engineered and standard
pumping solutions for the oil & gas, power generation, industrial, water and chemical markets. We offer a broad
range of centrifugal and reciprocating pumps that meet and exceed the requirements of the most demanding quality
specifications and industry standards such as API, ANSI, UL, FM, ISO and Hydraulic Institute.
Ruhrpumpen Plants
ARGENTINA, Buenos Aires
BRAZIL, Rio de Janeiro
CHINA, Changzhou
EGYPT, Suez
GERMANY, Witten Manufacturing plant &
service center
INDIA, Chennai
Service center
MEXICO, Monterrey
RUSSIA, Moscow
UK, Lancing
USA, Tulsa
July.21 www.ruhrpumpen.com