Professional Documents
Culture Documents
Warranty Registration Certificate
Warranty Registration Certificate
CONTACT NUMBER
SL.
EQUIPMENT : JAW CRUSHER TRAINING to OPERATORS Yes No
No.
1 Inspect all bolts to see if they are tight Y N Training of safety Installations
Fitter -
7 Check the Safety Installation Y N
Welder -
8 C.S.S Settings Y N
Helper -
9 Check in Operation Y N
Electrician -
10 Check Temperatures Y N
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.
Name - Name -
WARRANTY REGISTRATION CERTIFICATE
CONTACT NUMBER
SL.
EQUIPMENT : CONE CRUSHER TRAINING to OPERATORS Yes No
No.
1 Inspect all bolts to see if they are tight Y N Training of safety Installations
Electrician -
10 Check the Safety Installation Y N
11 C.S.S Settings Y N
12 Check in Operation Y N
Equipment SL. No. …………… & Power Pack SL. No. ………………… ERECTION DATE - ……………
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.
Name - Name -
WARRANTY REGISTRATION CERTIFICATE
CONTACT NUMBER
SL.
EQUIPMENT : CONE CRUSHER TRAINING to OPERATORS Yes No
No.
1 Inspect all bolts to see if they are tight Y N Training of safety Installations
Electrician -
10 Check the Safety Installation Y N
11 C.S.S Settings Y N
12 Check in Operation Y N
Equipment SL. No. …………… & Power Pack SL. No. ………………… ERECTION DATE - ……………
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.
Name - Name -
WARRANTY REGISTRATION CERTIFICATE
CONTACT NUMBER
SL.
EQUIPMENT : VERTICAL SHAFT IMPACTOR TRAINING to OPERATORS Yes No
No.
1 Inspect all bolts to see if they are tight Y N Training of safety Installations
Manager -
5 Check belt tension of all belts Y N
Welder -
8 C.S.S Settings Y N
Helper -
9 Check in Operation Y N
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.
Name - Name -
WARRANTY REGISTRATION CERTIFICATE
CONTACT NUMBER
SL.
EQUIPMENT : VIBRATING / DEWATERING SCREEN TRAINING to OPERATORS Yes No
No.
Manager -
4 Check height of the spring Y N
Supervisor -
5 Check the belts are tight and wear Y N
Fitter -
6 Check the amplitude stroke Y N
Electrician -
9 Check in Operation Y N
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.
CONTACT NUMBER
SL.
EQUIPMENT : SAND WASHER TRAINING to OPERATORS Yes No
No.
1 Inspect all bolts to see if they are tight Y N Training of safety Installations
Manager -
5 Check in Operation Y N
Supervisor -
6 Check the idle amps with Load amps Y N
Fitter -
Welder -
Helper -
Electrician -
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.
CONTACT NUMBER
SL.
EQUIPMENT : GRIZZLY / PAN FEEDER TRAINING to OPERATORS Yes No
No.
1 Inspect all bolts to see if they are tight Y N Training of safety Installations
Manager -
5 Check in Operation Y N
Supervisor -
6 Check the idle amps with Load amps Y N
Fitter -
Welder -
Helper -
Electrician -
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.
MODEL - …………
Propel Industries Pvt Ltd COMMISSIONING DATE - ……………
Yes No
CUSTOMER NAME
Warranty Certificate Received
Operation & Maintanence
PHONE NUMBER
Manual Received
COMMUNICATION ADDRESS Delivery Date as Promised
CONTACT NUMBER
SL.
EQUIPMENT : SEMI MOBILE - CHASSIS TRAINING to OPERATORS Yes No
No.
Fitter -
7 Check belt tension in Belt Conveyors Y N
Electrician -
10 Check the Safety Installation Y N
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.
Name - Name -
WARRANTY REGISTRATION CERTIFICATE
MODEL - …………
Propel Industries Pvt Ltd COMMISSIONING DATE - ……………
Yes No
CUSTOMER NAME
Warranty Certificate Received
Operation & Maintanence
PHONE NUMBER
Manual Received
COMMUNICATION ADDRESS Delivery Date as Promised
CONTACT NUMBER
SL.
EQUIPMENT : STATIONARY TRAINING to OPERATORS Yes No
No.
Supervisor -
6 Check belt tension in Belt Conveyors Y N
Helper -
9 Check the Safety Installation Y N
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.
Name - Name -
WARRANTY REGISTRATION CERTIFICATE
CONTACT NUMBER
SL.
EQUIPMENT : SAND WASHER TRAINING to OPERATORS Yes No
No.
1 Inspect all bolts to see if they are tight Y N Training of safety Installations
Manager -
5 Check in Operation Y N
Supervisor -
6 Check the idle amps with Load amps Y N
Fitter -
7 Check float switch function Y N
Welder -
8 Check Slurry pump function Y N
Helper -
9 Check cyclone function Y N
Electrician -
Propel warranty is valid for a period of 12-months of their Equipment performances with effect from the date of commissioning of plant
or 18-months from the date of invoice, which ever is earlier. The same will be considered against metallurgical / manufacturing defect
due to bad workman ship only. This warranty is not applicable if the plant is not erected / signed and ready for commissioning within 3-
months from the date of invoice. Warranty will not be applicable for Rubber items, Wear Parts (items which directly in contact with feed
material), Electrical, Bearings (@2000-2500 working hours Life only for Screen Bearings), Fasteners and Items damage caused by
improper operation; wear and tear of spares, alterations done by the buyer without OEM (Original Equipment Manufacturers) approval
like "use of VFD / others", or Non-Propel Spares parts is used during the period of warranty or consequential damages caused due to
improper feed material.