Professional Documents
Culture Documents
Door Lock Controls
Door Lock Controls
When placing your finger on the scanner, make sure the fingerprint
core is directly touching the scanner.
Essential Series YDME - 90 Essential Series YDME - 90
1.Installation Components
1
2
3
5
4
1.1 Install the mortise 1.2 Install the front lock body
1. LCD Screen
6
2. Keypad
LOCK UNLOCK LOCK UNLOCK
LOCK UNLOCK
3. Card Reading
Area
4. Fingerprint Sensor
5. Mortise
1.3 Install the back 1.4 Install batteries 1.5 Install the battery 6. Battery Cover 7
lock body (8X AA Alkaline) cover(switch on 7. Batter Cover Switch
“Lock” status)
4 5
Essential Series YDME - 90 Essential Series YDME - 90
Enrolling Fingerprint User at Random(Suitable for Home Use) Deleting with Fingerprint
Press “ # ” Press “ # ”
Press “ # ” Press “ # ”
Scanner Light on” Scanner Light on”
Place Finger Place Finger
Place a Finger on Scanner Place a Finger on Scanner
(Light off, Remove Finger, Light on) (Light off, Remove Finger, Light on) (A long Beep Sounds, Success) (A long Beep Sounds, Success)
Place Same Finger on Scanner Place Same Finger on Scanner Note: 1. You should the same operation once more
(A long Beep Sounds, Success) (A long Beep Sounds, Success) to delete the fingerprint thoroughly since the
Note: You can keep enrolling fingerprints one fingerprint is registered twice.
after another at this stage.
6 7
Essential Series YDME - 90 Essential Series YDME - 90
Input “ Master Code ” Input “12345678” Input “ Master Code ” Input “12345678”
8 9
Essential Series YDME - 90 Essential Series YDME - 90
Input “3-Digit User ID”(Twice)” Input “001” Remove the battery Cover
Press”6#” Press”6#”
11.Reset
Input “Master Code” Input “12345678”
Reset
Press”#” Press”#”
9.Unlocking
Connect the power wire on the front lock body with the batteries.
Keep pressing the RESET button on the rear metal plate of the front
lock body with a small stick for several seconds and touch the screen
to wake up the lock. Operation succeeds after hearing a long beep.
Lock will return to factory default status with master code “11111111”
and all its memory is cleared.
10 11
Essential Series YDME - 90 Essential Series YDME - 90
Press “**” Press “**” Place the finger on the scanner, the red 1.The fingerprint might not be To Enroll the fingerprint again
light is on with three short beeps, and enrolled
fail to open the door 2.The fingerprint might be deleted
Input “Master Code” Input “12345678”
Open the door with a valid fingerprint, the 1.The fingerprint is pressed 1.Try to press the fingerprint in correct
red light is on with three short beeps, and incorrectly location
Press “ # ” Press “ # ” fail open the door 2.The fingerprint is damaged 2.Enroll the fingerprint with another
finger
Note: Under passage mode, you can unlock it by touching the screen. Four beeps sound when opening the door Low battery voltage Change the batteries
12 13
Essential Series YDME - 90
14. Template
15 22
24.5
42
D:3
212
165. 5
240.5
Depth95
180.5
55
27. 5
57
62 55
18
D:3
15 Unit:mm
6600-309 Template
( Euro Automatic
Reverse Mortise)
14