This design summary specifies the materials, connections, welding, and construction standards for a steel structure. It outlines that steel plates and sections will be Q235 steel. Connections will use 10.9 grade friction bolts. Butt welds must meet Class II standards. Construction must follow regulations for steel structure engineering.
This design summary specifies the materials, connections, welding, and construction standards for a steel structure. It outlines that steel plates and sections will be Q235 steel. Connections will use 10.9 grade friction bolts. Butt welds must meet Class II standards. Construction must follow regulations for steel structure engineering.
This design summary specifies the materials, connections, welding, and construction standards for a steel structure. It outlines that steel plates and sections will be Q235 steel. Connections will use 10.9 grade friction bolts. Butt welds must meet Class II standards. Construction must follow regulations for steel structure engineering.
1. This design is designed in accordance with the Design Specification
for Steel Structures (GB50017-2003) and the Technical Specifications for Steel Structures for Lightweight Buildings with Steel Frames in Stores (CECS102:2002). 2. Material: steel plate and section steel are Q235 steel, 3. The splicing connection of the components adopts 10.9 grade friction type connection high-strength bolts, and the connection contact surface is used to remove the floating rust with wire brushes. 4. The concrete strength grade of the column foot foundation is C20, and the steel grade of the anchor bolt is Q235 steel. 5. Fillet welds not indicated in the figure shall be fully welded 6. The weld quality of butt welds shall not be lower than Class II. 7. The production and installation of the steel structure shall be constructed in accordance with the relevant regulations of the steel structure engineering construction and acceptance specification (GB50205). 8. After the rust removal of the steel components, the instant noodles are treated with two red red earth, and the fire rating of the construction is handled according to the building requirements.