Professional Documents
Culture Documents
Sheet One
Sheet One
Sheet One
2.2 Fig.2.2
25 mm
20 mm D 12 mm D
5 mm
22 mm
100 mm
125 mm
Figure 2.3
2.4 The stresses are to be copmuted at two points on the cantilever shown on the figure .
These are the stress element which is shown at A on the top of the bar and parallel to XZ
plane and the one at B that on the front side of the bar and parallel to the XY plane the forces are
F = 0.55 KN , P = 8 KN and T = 30 N.m
Draw both stress elements, label the axes and the stresscomponents using proer
magnitudes and directions
Figure 2.5
4
2.5
Figure 2.6