Professional Documents
Culture Documents
Instruction Manual - Wet Granulator (GH-1)
Instruction Manual - Wet Granulator (GH-1)
Instruction Manual - Wet Granulator (GH-1)
OPERATIONAL QUALIFICATION
EQUIPMENT Wet Granulator GH-1
INSTRUCTION
MANUAL
OF
WET GRANULATOR
GH-1
OPERATIONAL QUALIFICATION
EQUIPMENT Wet Granulator GH-1
Written by
Reviewed by
Client approvals
Production
Representative
Quality
Representative
Effective Date Of
Issued To
Document
Issued By
OPERATIONAL QUALIFICATION
EQUIPMENT Wet Granulator GH-1
TABLE OF CONTENTS
OPERATIONAL QUALIFICATION
EQUIPMENT Wet Granulator GH-1
The Wet Granulator Type – GH-1 has been designed for the production of
granulates of various sizes from moistened powder. It can be used to reduce slugs
The unit operates on the oscillating rotor principle. The granules compress through a
trays prior to removal to the drying oven, the Stainless Steel Rotor (6) measures
164mm long x 75mm OD has four blades and may be readily removed for cleaning.
Using two hand wheels 6 & 7 provided for this purpose. It has an oscillation angle of
When connecting the Wet Granulator it is very important to screw tightly the 4 nuts
provided for a fixing type. Before starting the operation the following instruction have
to be complied with.
When inserting the Rotor Assembly (6) the Pressure Spindle (8) Small Hand Wheel
(10) should be screw on only enough to make any axial movement of the rotor
impossible. Then the Big Hand Wheel (11) has to towards Spindle Nut (7) in order to
To insert the Wire Mesh Sieves (12) the Ratchet Pin (9) which are located at the
OPERATIONAL QUALIFICATION
EQUIPMENT Wet Granulator GH-1
side of the Stretching Handle (5) have to be loosened only so far that the stretching
The Sieves (12) has then to be placed by inserting its holders into the slit of the
Stretching Handle (5) then the Ratchet Pin (9) are tightened only so much that the
Handle (5) can be easily turned by hand. This is necessary to stretch the sieve
ATTENTION:
fit loosely into the place. If the sieve tightened too much it
OPERATIONAL QUALIFICATION
EQUIPMENT Wet Granulator GH-1
2. TECHNICAL DATA
Sr No. Features
2103013
2103015
4 Rods St.
4. Rotor
St. 164.00 L x Ø 75.00 mm OD.
Year of manufacture
9. May 2021-22
of the machine
OPERATIONAL QUALIFICATION
EQUIPMENT Wet Granulator GH-1
3. PART LIST
OPERATIONAL QUALIFICATION
EQUIPMENT Wet Granulator GH-1
OPERATIONAL QUALIFICATION
EQUIPMENT Wet Granulator GH-1
Part List
5. HM21104 Handle
**********
Wet Granulator - GH-1