Professional Documents
Culture Documents
Project Plan Lampshade PDF Incandescent Light Bulb Electrical Connector
Project Plan Lampshade PDF Incandescent Light Bulb Electrical Connector
AD
LA SALLE UNIVERSITY Integrated School Abanil Extn., Aguada, Ozamiz City LAMP SHADE MAKING Project Plan No.
2 I. Purpose: 1. To acquire knowledge and develop skills on how to make a lamp shad… Full description
/ ' ( ) * +
Save 72% 28% Embed Share Print
LA SALLE UNIVERSITY
Integrated School
Abanil Extn., Aguada, Ozamiz City
I. Purpose:
1. To acquire knowledge and develop skills on how to make a lamp shade.
2. To assemble a quality and useful lamp shade.
3. To observe safety measures while doing the project.
II. Sketch/Drawing:
00:00 00:00
V. Procedures:
1. Prepare the plan.
2. Gather all necessary materials, tools and equipment needed.
3. Find a base.
4. Prepare a base for the rod.
5. Stabilize the bottom of the base.
IV. Tools
6.and Equipment
Thread the cordNeeded:
through the rod. Replay
7. Screw 1 - the
Standard/Flat Screw
neck onto the Driver
lamp rod (optional).
8. Add1the - Philips Screw Driver
harp bottom.
9. Screw 1 - on
LongtheNose Pliers
socket cup.
10. Strip1 the
- Side Cutting Pliers
wires.
1 Hammer
11. Tie the wires. and Chisel
-–Pocket
12. Find1the knife
hot wire and the neutral wire.
1 - Continuity
13. Wrap the wires around Testerthe
or Multi-tester
screws on the bulb socket.
14. Put the socket shell over the bulb socket
V. Procedures:
15. Attach the top of the harp.
1.
16. Prepare
Place thethe plan.
lampshade on the top of the harp.
2.
17. Gather
Screw aall necessary
light materials,
bulb into tools
the socket, andand equipment
plug needed.
in your lamp.
3. Find a base.
4. Prepare a base for the rod.
5. Stabilize the bottom of the base.
6. Thread the cord through the rod.
7. Screw the neck onto the lamp rod (optional).
8. Add the harp bottom.
9. Screw on the socket cup.
10. Strip the wires.
11. Tie the wires.
12. Find the hot wire and the neutral wire.
13. Wrap the wires around the screws on the bulb socket.
14. Put the socket shell over the bulb socket
15. Attach the top of the harp.
16. Place the lampshade on the top of the harp.
17. Screw a light bulb into the socket, and plug in your lamp.
OR
Criteria 5 points 3 points 1 point
Functionality Unlock
Lamp shadethis pageLamp
is 100% ajershade
an adis Lamp shade is not
functional. functional but functional.
intermittent.
Quality Terminal wires are Terminal wires are Terminal wires are
properly twisted & not properly 10
loose, output is not
secured, output is twisted and presentable.
presentable. secured, output is
not presentable.
Method Followed the given Followed the given Followed the given
step from start to step, noted once step, noted more
finish, using incorrect usage of once incorrect
appropriate tools
RUBRICS tools. usage of tools.
VI. Criteria for Grading: for each task.
Safety No injury happened Noticed one Noticed more than
Criteria 5 points
while doing the 3 points
incidence of injury 1 point of
one incidence
Functionality Lamp
task. shade is 100% Lamp shade the
while doing is Lamp
injury.shade is not
functional. functional
task. but functional.
Time Finish the given task intermittent.
Finish the given task Unable to finish the
Quality
Management Terminal wires
within20 minutes are Terminal wires
within 21 -30 are Terminal
given task.wires are
properly twisted & not properly
minutes . loose, output is not
secured, output is twisted and presentable.
presentable. secured, output is
VII. Remarks: not presentable.
Method Followed the given Followed the given Followed the given
______________________________________________________________________________
step from_________
______________________________ start to step, noted once
_________ step, noted
___________ more __
_________
finish, using incorrect usage of once incorrect
___________________________________________________________________
appropriate tools tools. usage of tools.
____________________________ ___________
for each task.
_________ _________ __________
_________
Safety___________________ ___________
No injury happened _________
Noticed one __________
Noticed _________
more than
____________________________ while doing___________
the _________
incidence __________
of injury _________
one incidence of
____________________________ task. ___________
while_________
doing the __________
injury. _________
_______________________________________ task.
Finish the given task__________________
__________
Time Finish the given task within 21 -30 Unable to finish the
Management within20 minutes minutes given task.
.
VII. Remarks:
______________________________________________________________________________
______________________
________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
Document 10 pages
Document 2 pages
Document 3 pages
Document 16 pages
EIM Module 2
LouieRalphOasay
No ratings yet
Document 2 pages
Kaunlaran High School K-12 T.L.E. Exploratory Course (Electricity) Project Plan -
(Making An Extension Cord)
Tawagin Mo Akong Merts
No ratings yet
Document 3 pages
Document 9 pages
Document 3 pages
G10 Cot 2
Steven King Bayawa
No ratings yet
Document 8 pages
Document 13 pages
Document 4 pages
Document 3 pages
Show more
Scribd for
enterprise
Documents
Language: English
This website utilizes technologies such as cookies to enable essential site functionality, as well as for analytics, personalization, and targeted
advertising purposes. To learn more, view the following link: Privacy Policy