Professional Documents
Culture Documents
Ub List by Voot V2
Ub List by Voot V2
By Voot
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANY HARM DONE TO YOUR
COMPUTER. THIS LIST HAS BEEN DONE MULTIPLE TIMES ON MY PC AND
MANY OTHERS. FOLLOW INSTRUCTIONS CAREFULLY FOR EACH
SETTING. STOP DMING ME FOR HELP, FIGURE IT OUT YOURSELF.
AP Threads Idle Manner | Set to “RUN Loop” (99% sure this is not on AMD
systems) I had better smoothness/mouse feel setting it to RUN Loop.
PS2 Keyboard and Mouse (DISABLE) | Disable this if you do not use a PS2
peripheral.
Power Down Unused Lanes (DISABLE) | Related to Power down for PCIe
lanes. (There are tons of these, so make sure to go through, get the offset
and disable it in Grub)
Snoop Latency Multiplier (Set to 0x0) | Still TESTING, this won’t mess up
anything, test and see if you feel a difference or gain higher framerates.
(There are multiple Latency Multipliers, so make sure to go through and set
to 0x0.)
Snoop Latency Value (Set to 0x0) | Still TESTING, this won’t mess up
anything, test and see if you feel a difference or gain higher framerates.
(There are multiple Latency Multipliers, so make sure to go through and set
to 0x0.)
Non Snoop Latency Multiplier (Set to 0x0) | Still TESTING, this won’t mess
up anything, test and see if you feel a difference or gain higher framerates.
(There are multiple Latency Multipliers, so make sure to go through and set
to 0x0.)
Non Snoop Latency Value (Set to 0x0) | Still TESTING, this won’t mess up
anything, test and see if you feel a difference or gain higher framerates.
(There are multiple Latency Multipliers, so make sure to go through and set
to 0x0.)
PowerDown Energy Ch1Dimm1 (Set to 0x0) | Related to RAM Power Down Mode.
Command Rate Support (Set to 0x0) | Disable this before ram overclocking, as it
can force fake command rate and give you bad results.