Professional Documents
Culture Documents
81 P 8 Vee KHT L
81 P 8 Vee KHT L
www.miccus.com
The Miccus® Home RTX uses wireless Minccus® Home RTX (BBRT-01)
Dipole Antenna
Bluetooth® technology allowing you to
AC USB Wall Adapter
transmit or receive high quality stereo USB mini cable
audio from home stereos, AV receivers, RCA to 3.5mm stereo Y Cable
audio components, DVD/BluRay players, RCA to RCA Cable
User Manual
mobile phones, tablets and more.
AC - USB Wall Adapter
Frequency: 2.4GHz
Size: 4.37 x 3.48 x Iinches Weight: 5.22 oz RCA Audio Output Left/Right Dipole Antenna
2 3
Get started In" (3.5mm), or the "TX Audio In" (RCA) on
Attach the supplied antenna to the anetnna the back of the Home RTX, then connect the
terminal of the Home RTX. For optimum other end to your stereo receiver or other
performance position the antenna so it is audio output.
upright (pointing toward the ceiling) and in an Pairing the Home RTX
area that is not obstructed by objects, walls
Wireless Bluetooth® devices must be "paired"
or near Wi-Fi equipment such as a wireless
in order to communicate. The Home RTX
router. Connect the mini-USB cable to the
supports the Bluetooth® wireless (A2DP)
Home RTX and to the included power supply.
protocol which is a standard music streaming
Receiving mode (RX): When using the Home profile for Bluetooth® capable devices. For
RTX as a wireless Bluetooth® receiver it can the Home RTX, pairing is a two part process;
receive wireless audio from any compatible the Home RTX must be placed in pairing mode,
Bluetooth® device (i.e. smart-phones, tablets, and the device pairing with the Home RTX
laptops, mp3 players, etc.). Connect one end must also be placed in pairing mode. Once the
of the included audio cable to either the "Line pairing process is complete the devices do not
Out" (3.5mm), or the "RX Audio Out" (RCA) need to be paired again. To reconnect simply
on the back of the Home RTX, then connect power paired devices on and they will
the other end of the cable to your stereo remember each other and automatically
receiver or other audio input. reconnect. Always keep the Home RTX
connected to a power source; the Home RTX
Transmitting mode (TX): When using the has no internal battery, and will forget the
Home RTX as a wireless Bluetooth® device it's paired to if the Home RTX is
transmitter it can transmit audio to any disconnected (unplugged).
compatible Bluetooth® device (i.e. Bluetooth®
headphones, speaker systems, etc) from audio Note: Only one device at a time can be
sources such as stereo receivers, mp3 players, paired with the Home RTX.
radios, televisions and more. Connect one end Using the Home RTX as a music receiver
of the included audio cable to either the "Line (RX Mode):
4 5
1.Press and hold the center power button for 3 1. Power on and place your Bluetooth®
seconds or until the Red LED flashes. compatible receiving device into pairing mode.
2. Press and hold the RX button for 5 seconds Such devices include the Miccus® Mini-jack RX,
then release; the LED flashes red and blue Bluetooth® headphones , speakers, and more;
(indicating pairing mode). refer to your device documentation for more
3. Next, power on and place your Bluetooth® information on the pairing process.
compatible transmitting device into pairing 2.Press and hold the center power button of
mode. Such devices include smart - phones, the Home RTX for 3 seconds or until the Red
tablets, PCs, laptops, or the Mini-jack TX; refer LED flashes.
to your device documentation for more 3. Press and hold the TX button for 5 seconds
information on the pairing process. then release ; the LED flashes red and blue
4. Place the transmitting device and the Home (indicating pairing mode).
RTX next to each other (within 3ft). Search for 4. Place the receiving device and Home RTX
the Home RTX on your mobile phone, laptop, next to each other (within 3ft). Note: some
or tablet and then select connect. To finish the devices may require a passkey or code. If so,
pairing, some devices may require a passkey or use "0000".
code. If so, use "0000". 5. Within 10-20 seconds the devices should
5. Within 10-20 seconds the devices should discover each other and connect. Once they
discover each other and connect. Once they are paired, the Home RTX indicator LED will
are paired, the Home RTX indicator LED will stop blinking red and blue and light a solid red
stop blinking red and blue, and light a solid blue color.
color. 6.To power off the Home RTX press and hold
6.To power off the Home RTX press and hold the center button for 3 seconds.
the center button for 3 seconds. 7. Once the devices have been paired you do
7. Once the devices have been paired you do not not need to repeat the pairing process, simply
need to repeat the pairing process, simply power power both on, and they will automatically re-
both on, and they will automatically re-connect. connect.
Note: To reset the Home RTX disconnect
Using the Home RTX as a music transmitter
the USB cable for 15 seconds and then re-
(TX Mode):
insert it again.
6 7
Audio break 1)Make sure the
ups or Wire- antenna is attached
Status LED
less range too securely and positioned
Red and Blue flashing low correctly. 2) Move the
Pairing Mode alternately Home RTX away from
other 2.4GHz equipment
Rx Mode Connecting such as Wi-Fi routers and
Microwaves.
Rx Mode Connected Blue LED is solid
8 9
Can't pair my 1) Make sure the Home
device with 57;DQGWKHGHYLFH\RX¶ If your question is not answered via the
the Home re pairing with are next support page, feel free to email us at support
RTX to each other. @miccus.com; please include a product name
2) Make sure all other
Bluetooth® compatible in your email subject line.
GHYLFHV\RX¶UHQRWWU\LQJ For live technical assistance please call 1(616)
to pair with are either 604-4449 Monday-Friday, 11am-4pm EST.
powered off or
Bluetooth® disabled.
3) Make sure you have the
correct mode selected;
one device must be the
transmitter and one
device must be the
receiver. Devices such as
smartphones & laptops
are transmitters, and
devices such as
headphones and speakers
are receivers.
4) Make sure both devices
are in pairing mode. LED
equipped devices will
typically flash fast when in
pairing mode and flash
slowly when connected.
5) Make sure your device
is compatible with the
wireless A2DP
Bluetooth® stereo audio
profile.
10 11
by one or more of the followingmeasures:
-Reorient or relocate the receiving antenna.
This device complies with Part 15 of the FCC -Increase the separation between the
rules. Operation is subject to the following two equipment and receiver.
conditions: -Connect the equipment into an outlet on a
(1) this device may not cause harmful circuit different from that to which the
interference, and (2) this device must accept receiver is connected.
any interference received:including interference -Consult the dealer or an experienced radio/
that may cause undesired operation. TV technician for help.