Professional Documents
Culture Documents
SB 72-5136 PG 23
SB 72-5136 PG 23
(9) If removed, install the fan stator vanes which were adjacent to the fan stator vane being
replaced (refer to Steps (4) and (5)), in their original location in accordance with the
Engine Light Maintenance Manual. If used, remove the masking tape used for
marking.
(10) Install replacement Fan Stator Vane, Part Number 3060379-1 (regardless of the part
number removed), in accordance with the Engine Light Maintenance Manual.
(11) Complete reassembly of the fan stator assembly in accordance with the Engine Light
Maintenance Manual and as indicated in Figure 4.
(12) Reassemble the engine as required in accordance with the Engine Light Maintenance
Manual.
(13) Check and ensure proper engine operation in accordance with the Aircraft Flight
Manual and/or appropriate aircraft documents.
(14) Make an entry in the engine log book noting date of compliance, engine operating time,
part number(s) and serial number(s) of installed component(s) (as applicable), and
compliance with this service bulletin (and service bulletin revision number, if
applicable).
(15) Complete the attached Compliance Certificate form and send to Honeywell.
NOTE: The fan stator vane assembly may be reworked with the engine re-
moved or on the wing.
(1) Disassemble engine as required to gain access to the fan stator vane assembly in
accordance with the Engine Light Maintenance Manual.
(2) Remove the retaining band from the fan stator vane assembly in accordance with the
Engine Light Maintenance Manual.
7 Oct 1999
Revision 1, 8 Feb 2008 TFE731-72-5136
Page 23
Honeywell International Inc. Do not copy without express permission of Honeywell.