Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

SERVICE BULLETIN

E. (TFE731-60-1C) Rework Fan Stator Assembly, Part Number 3060239-3, to


Part Number 3060239-4

CAUTION: WHEN REPLACING FAN STATOR VANE(S), TO MAINTAIN KEY


DIMENSIONAL TOLERANCES, NO MORE THAN 3 CONSECU-
TIVE (IN ONE GROUPED AREA) STATOR VANES ARE TO BE
REMOVED (REGARDLESS OF PART NUMBER) AT ONE TIME
TO PREVENT MISALIGNMENT (SHIFTING) OF THE STATOR
SHROUD AND THE STATOR HUB IN RELATION TO EACH OTH-
ER.

FAN STATOR VANE, PART NUMBER 3060379-1, MAY BE USED


ONLY WITH SHROUD GROMMET, PART NUMBER 3060380-1.

NOTE: The fan stator vane assembly may be reworked with the engine re-
moved or on the wing.

(1) Disassemble engine as required to gain access to the fan stator vane assembly in
accordance with the Engine Light Maintenance Manual.

(2) Remove the retaining band from the fan stator vane assembly in accordance with the
Engine Light Maintenance Manual.

NOTE: To rework Fan Stator Vane Assembly, Part Number 3060239-3,


to Part Number 3060239-4, all fan stator vanes must be Part Number
3060379-1, and all shroud grommets must be Part Number
3060380-1.

(3) Determine part number of the fan stator vanes installed. (See Figure 1.)

(4) Locate and remove all Fan Stator Vanes, Part Number 3060254-1, (no more than 3
consecutive fan stator vanes in one grouped area are to be removed at one time) and
install replacement Fan Stator Vanes, Part Number 3060379-1, in accordance with the
steps in Paragraph 3.C.

(5) Complete reassembly of the fan stator assembly in accordance with the Engine Light
Maintenance Manual.

(6) Reidentify the fan stator assembly to Part Number 3060239-4, using vibro-etch method
in accordance with Aerospace Standard AS478 (Method 2D) by lining through the dash
(-3) number and adding a (-4).

(7) Reassemble the engine as required in accordance with the Engine Light Maintenance
Manual.

(8) Check and ensure proper engine operation in accordance with the Aircraft Flight
Manual and/or appropriate aircraft documents.

(9) Inspection/Repair/Maintenance requirements for Fan Stator Assembly, Part Number


3060239-4 shall be the same as for Part Number 3060239-3.

7 Oct 1999
Revision 1, 8 Feb 2008 TFE731-72-5136
Page 25
Honeywell International Inc. Do not copy without express permission of Honeywell.

You might also like