Professional Documents
Culture Documents
0-Schedule (2019)
0-Schedule (2019)
0-Schedule (2019)
Concrete Design
Consultation
Consultation hours:
Thursdays, 5:00 – 6:00 pm
Pre-requisites
Students must have taken an elementary course in
Reinforced Concrete Design (e.g., CE3165)
Also, preferably with some knowledge of concrete
technology
© Tan K H, NUS 3
© Tan K H, NUS
Lesson Plan (1/2)
Week Date Topic Remarks
© Tan K H, NUS 5
Assgn 3 due on
11 29 Oct 2019 11. Slender column design
29 Oct 2019
12 5 Nov 2019 12. Concrete bridges
Term Paper due
13 12 Nov 2019 13. Water-retaining structures
on 15 Nov 2019
© Tan K H, NUS 6
Syllabus (1/2)
Design Philosophy (3 hours)
Materials; actions; strength; serviceability and durability.
Design for Ultimate Limit States (6 hours)
Method of strain compatibility for bending and axial loading; truss
method for shear and torsion.
Serviceability Limit States (6 hours)
Stress Limitation; Crack control and crack width calculations;
deflection control and calculation of deflections; long-term effects.
Structural Detailing in Concrete (3 hours)
Principles of detailing; Anchorage and lapping of bars; Detailing of
members.
Strut-and-tie method for design (3 hours)
Corbel and brackets; pile-caps; non-prismatic beams; beams with
openings.
© Tan K H, NUS 7
Syllabus (2/2)
Collapse load methods for slab design (6 hours)
Yield line theory; Hillerborg's strip method; openings in slabs.
Flat slab system (3 hours)
Column heads; division of panels; deflection; crack control; shear;
arrangement of reinforcement; post-tensioned slab systems.
Slender Column design (3 hours)
Braced slender columns; design moments; unbraced slender
columns; adjustments to additional moments; design of columns
with high strength concrete.
Concrete Bridges (3 hours)
Types; loads: partial load factors; load combinations; load
application; introduction to bridge analysis.
Water-retaining structures (3 hours)
Types; loads; load combinations; methods of analysis; design for
cracking and temperature.
© Tan K H, NUS 8
Assessment
© Tan K H, NUS 9
Recommended Text
Bhatt, P., MacGinley, T.J. & Choo, B.S., “Reinforced Concrete
Design to Eurocodes – Design Theory & Examples”, 4e, CRC
Press, 2014.
© Tan K H, NUS 10