Professional Documents
Culture Documents
Airtractor Assembly
Airtractor Assembly
Assembly Guide
Airtractor AT502B Paper Model Page 1 of 10
Copyright, Steve Bondy, 2006
1. Assemble part 1, then insert former B2. The
former should sit just behind the cockpit area
4
3
B4
3+4
2 B3
Assembly Guide
Airtractor AT502B Paper Model Page 2 of 10
Copyright, Steve Bondy, 2006
6. Attach Part 1 to the remainder
of the fuselage.
5
Note: I originally intended for the propeller to turn, I just never quite got the details finished. This
should be a fairly simple modification if you desire. A future release will incorporate this (provided I
get enough feedback to motivate me :)
X
X
Assembly Guide
Airtractor AT502B Paper Model Page 3 of 10
Copyright, Steve Bondy, 2006
Cockpit Roof
10
10a
Assembly Guide
Airtractor AT502B Paper Model Page 4 of 10
Copyright, Steve Bondy, 2006
10b
11
Fold over and glue part
14, cut it out, then glue
on the reverse side (part
13 1 15). This gives three
12 2 layers for more
strength.
15
Assembly Guide
Airtractor AT502B Paper Model Page 5 of 10
Copyright, Steve Bondy, 2006
Assemble and attach the wings
Step 3 - Fold over rear Step 4 – Fold over front
flap and glue in place flap and glue in place
19,20
Step 2 – Cut out 17,18
formers and glue in
place
Assembly Guide
Airtractor AT502B Paper Model Page 6 of 10
Copyright, Steve Bondy, 2006
#21/22 - Fold over the the inner wheel pieces and
Assemble and attach front landing gear glue for a double thickness, then cut out and laminate
as many layers as you need to get an appropriate
thickness. For a 1/48 model you need about 5mm. For
a 1/72 model you need about 3.5mm
#16 (x2)
Assembly Guide
Airtractor AT502B Paper Model Page 7 of 10
Copyright, Steve Bondy, 2006
Assemble and attach rear landing gear
24
23
1 2 3 4 5
#6 (x2)
Assembly Guide
Airtractor AT502B Paper Model Page 8 of 10
Copyright, Steve Bondy, 2006
Shape and Attach Nose Details
7
8
Assemble and attach Spray bar
The pieces of the spray bar are floded lengthwise and glued, then assembled as shown below right.
#28, 29, 30
28 29 30
#27 (3X)
Fold over and glue
Done!
Assembly Guide
Airtractor AT502B Paper Model Page 10 of 10
Copyright, Steve Bondy, 2006