This document is a specification sheet for a heat exchanger. It provides details on the customer, size, performance parameters, construction details, and codes for a shell and tube heat exchanger. Key details include it has 1800 tubes that are 19.05mm OD, the shell is 1200mm ID, temperatures are 80-120C on the shell side and 220-300C on the tube side, materials include SA516 Gr 70 for the shell and SA266 for the tubesheet. Heat exchanged is listed as well as construction details like baffles, joints, and codes.
This document is a specification sheet for a heat exchanger. It provides details on the customer, size, performance parameters, construction details, and codes for a shell and tube heat exchanger. Key details include it has 1800 tubes that are 19.05mm OD, the shell is 1200mm ID, temperatures are 80-120C on the shell side and 220-300C on the tube side, materials include SA516 Gr 70 for the shell and SA266 for the tubesheet. Heat exchanged is listed as well as construction details like baffles, joints, and codes.
This document is a specification sheet for a heat exchanger. It provides details on the customer, size, performance parameters, construction details, and codes for a shell and tube heat exchanger. Key details include it has 1800 tubes that are 19.05mm OD, the shell is 1200mm ID, temperatures are 80-120C on the shell side and 220-300C on the tube side, materials include SA516 Gr 70 for the shell and SA266 for the tubesheet. Heat exchanged is listed as well as construction details like baffles, joints, and codes.
This document is a specification sheet for a heat exchanger. It provides details on the customer, size, performance parameters, construction details, and codes for a shell and tube heat exchanger. Key details include it has 1800 tubes that are 19.05mm OD, the shell is 1200mm ID, temperatures are 80-120C on the shell side and 220-300C on the tube side, materials include SA516 Gr 70 for the shell and SA266 for the tubesheet. Heat exchanged is listed as well as construction details like baffles, joints, and codes.
Address Reference number Plant Location Proposal no: Service of Unit Date Rev Size (ID) x mm (L) Type BEM Horizontal Item no: Surface / unit (Gross Efficiency) m2 Connected in 1 Parallel 1 Series
PEFORMANCE OF ONE UNIT
Fluid Allocation Shell Side Tube side Fluid name Fluid Quantity , Total (kg/hr) Vapour (in/out) Liquid Steam Water Noncondensables Temperature (In/out) (oC) 80/120 220/300 80 120 220 300 Specific Gravity Viscosity (cP) 100 180 Molecular Weight , Vapour Molecular Weight, Noncondensables Specific Heat (J/kg oC) Thermal conductivity (W/mK) Latent heat (kJ/kg) Inlet pressure (Barg) Velocity (m/s) Pressure Drop , Allow/ Cal (barg) Fouling resistance (min) (m2 K/W) Heat Exchanged (W/hr) o Transfer Rate, service (W/m2-hr- C) CONSTRUCTION OF ONE SHELL Sketch (Bundle / Nozzle Orientation ) Shell Side Channel/ Tube side Design / Test Pressure (Barg) 16 33/Vacuum Desgn Temperature (oC) 150 350/60 No pass per shell 1 2 Corrosion Allowance (mm) 3 3 Connection size & Rating (In - Inch) 6" 6" (Out- Inch) 6" 6" (Intermediate - Inch) o Tube No. / OD/ thk / length/pitch / Layout 1800 units 19.05 mm 2.1083 mm 6000 mm (Outer) Layout : 30 Tube type Plain type Tube material SA 179 Shell ID 1200 mm SA516 Gr 70 Shell Cover ID NA mm Channel or Bonnet ID/ L 1200/800 mm SA516 Gr 70 Channel Cover ID 1200 mm SA516 Gr 70 (SE 2:1) Tubesheet -stationery OD 1515 mm SA266 Tubesheet - floating OD NA mm SA266 Floating Head Cover ID NA mm NA Impingement plate W,L NA mm NA Baffle -cross OD 1150 mm SA 516 Gr70 Type Single segment % cut 70% Spacing (in) 300 mm spacing (C-C) 400 mm Baffle- Long (partition) W, L 1200, 1100 mm SA 516 Gr70 Seal type NA Supports-Tube NA U-Bend NA By-pass seal arrangement NA Tube-tubesheet joint (i) type - expanded with 2 grooves Expansion joint Type Gasket - Shell flange Spiral wound Gasket -Channel flange Spiral wound - Floating head flange Code (shell / channel ) ASME SEC VIII Div 1 ( latest Edition) Code (Tube bundle) TEMA / ASME UHX Weight (Shell/ Channel) Weight (Tube bundle) Remark The mean temperature is calculated base on avearge value of minimum temp add to maximum temperature. RT apply is RT2