Professional Documents
Culture Documents
Proiect Despre Masini
Proiect Despre Masini
Elev
Cîșlariu Teodor-Andrei
Clasa a XI-a
Îndrumător
Gheorghiță Delia Loredana
Anul 2023-2024
1
Tema proiectului
2
CUPRINS
1.COMENZI DE DESENARE
2.COMENZI DE EDITARE
3.COMENZI DE HAȘURARE
4.COMENZI DE COTARE
3
Capitolul 1
Comenzi de desenarE
4
Rectangle 2
5
2.Line-Comandă de desenare care are ca efect desenarea unei linii
6
Command: L
7
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: L
LINE
8
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: L
LINE
Specify first point:
Specify next point or [Undo]
9
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <5>: d
Specify diameter of circle <9>: 10
Command: c
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <5>: d
Specify diameter of circle <10>: 8
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <4>: d
Specify diameter of circle <8>: 8
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <4>: d
10
Specify diameter of circle <8>: 9
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <5>: d
Specify diameter of circle <9>: 9
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <5>: d
Specify diameter of circle <9>: 15
11
Capitolul 2
Comenzi de editare
1.Offset-
12
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <Through>: 10
Command: EXPLODE
13
Select objects: 1 found
Select objects:
Command: OFFSET
2.Trim
14
OMMAND: _TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
15
Specify next fence point or [Undo]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo
CAPITOLUL 3
Comenzi de hasurare
16
1.Hatch
Command: _hatch
Pick internal point or [Select objects/Undo/seTtings]: Selecting everything...
Selecting everything visible...
Analyzing the selected data...
17
Analyzing internal islands...
Pick internal point or [Select objects/Undo/seTtings]: Selecting everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/Undo/seTtings]: Selecting everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/Undo/seTtings]: Selecting everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/Undo/seTtings]:
>>Enter new value for ORTHOMODE <0>:
Resuming HATCH command.
Capitolul 4
Comenzi de cotare
18
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 70.0000
Command:
Command:
Command: _dimlinear
19
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 60.0000
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 10.0000
Command: DIMLINEAR
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 10.0000
20
21