Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Don Searles check of tools needed to make a dredging

equipment survey.

1. Oil sampling pump, tubes and jars.


2. Dial calipers
3. Crackle hot plate to 400 F
4. Remove starter switch.
5. Laser thermometer 1200 F
6. Black marker.
7. Tool to cut open filters.
8. Small bottle of Spray-nine.
9. Hand towels
10. Tube of paste to test for water in oil.
11. Strap wrench to change filters.
12. ½ inch drive ratchet
13. Volt/ Amp tester
14. Camera
15. Check list
16. Clip board and clips to hold down paper.
17. Note book
18. Tape recorder.
19. Flash light Extra batteries
20. Head light
21. Tape measures. 50 feet and 12 feet
22. Mechanics stethoscope.
23. Sandpaper
24. Magnifying glass
25. Telescoping mirror
26. Telescoping magnet
27. Scraper
28. 4 in 1 screwdriver
29. 8 and 12 inch crescent wrenches
30. Two 4 in 1 box wrenches
31. Pliers
32. Three trash bags and ties.

You might also like