Professional Documents
Culture Documents
Rotatory Tutorial
Rotatory Tutorial
4).change Y step grbl setting to 64, this is for rotatory work only, if you use machine pls set it back
to 80.
5).after upload the file you can Frame to preview working area before engraving, keep engraving
area on correct position.
6).set power and speed.
7).if engraving on glass the transparent, you should put a layer of black color on glass first,laser
engrave on black color it canot engrave on transparent directly, you can use the erase pen or use
nail polish. But if not transparent materials you not need do this step, just engrave on surface
noproblem.
8).focus the laser, take the 27mm bar put under laser make distance about 27mm.
9).start engraving.
10).after engraved, clean the black color, you use use alcohol or water clean it. Finish
Rotatory After assembled pictures reference