Professional Documents
Culture Documents
How Arlon 44N PCB Material Impacts PCB's Performance
How Arlon 44N PCB Material Impacts PCB's Performance
Table of Contents
Arlon 44N PCB material is a multifunctional micro dispersed epoxy prepreg system.
This material is filled with epoxy fiberglass. Also, this PCB material features high
resin content. Arlon 44N PCB material was specially designed for filling up clearance
holes in thin metal PCBs. For example, it can fill clearance holes in 0.006 inches
Copper-invar-Copper. Also, it is ideal for via holes in sequentially
laminated multilayer board designs.
This prepreg system is very compatible with conventional epoxy fabrication. Arlon
44N PCB material reduces cracking and resin shrinkage in filled clearance holes. Also,
the prepreg format removes any need for messy paste fill material. This material
features a high Tg value that is very compatible with multifunctional epoxy
processing.
Furthermore, Arlon 44N PCB material is available in high resin content prepreg. This
material meets the specifications and requirements for IPC 4101/98. Therefore, it is a
very reliable prepreg system. Also, Arlon 44N features great mechanical, electrical,
and thermal properties.
Thermal properties
The glass transition temperature of Arlon 44N is 175 degrees Celsius. This is a
high Tg value. Therefore, this material offers thermal stability. The Tg value is
the same at DSC and TMA.
The thermal conductivity of Arlon 44N is 0.300 W/m-K.
The Z-axis CTE value of Arlon 44N is 55 ppmo/C before glass transition
temperature. After Tg, the CTE is 200 ppmo/C. However, the CTE at X and
Y-axis is within the range of 14 – 16 ppmo/C. These values are ideal
for PCB materials.
Mechanical properties
The peel strength is 8 Ib/in (N/mm) at elevated temperature and after thermal
stress. Also, this value is the same after process solutions.
The water absorption rate of Arlon 44N is very low. This material features a
0.1% water absorption rate. Therefore, this material is ideal for use in a very
humid environment.
The young’s modulus is 2.8 Mpsi (GPa). Also, this mechanical property
determines the functionality of this material. Therefore, it is very important.
Electrical properties
Arlon 44N is a PCB material that features no lead components. Therefore, this
material is ideal for use in lead-free applications.
Industry approvals
Arlon 44N PCB material is recognized and approved by some standards. For instance,
this material complies with RoHS/WEEE standards. Also it meets the requirements
and specifications of UL 94 V-0. In addition, it meets the specifications of IPC
4101/98.
Arlon 44N is filled with micro-disperse ceramic. This helps to reduce cracking in
filled clearance holes. Also, it reduces resin shrinkage.
Experts recommend using vacuum assist lamination or vacuum for processing this
material. Time, pressure, and temperature will depend on the panel size and other
factors. Regulating the rate of heat-up is very important. The temperature of
the multilayer package should be about 4-7 degrees per Celsius.
You should use a 90 minute cure temperature of 185 degrees Celsius to achieve a
glass transition temperature below 170 degrees Celsius. You may need to extend the
cure time to offset the metal’s heat lagging effects.
Use 1 hour for the first lamination in a sequential lamination. Then, you can now use
90 minutes for the final lamination. The cool down under pressure should be less than
5.5 degrees Celsius per minute. You can increase reliability cracking resistance by
cooling down at less than 3 degrees Celsius per minute.
You should drill at 350 square feet meters. Experts recommend an undercut bit for
vias that are 0.45cm and smaller. Utilize alkaline permanganate to desmear. Also, you
can use plasma desmear with settings ideal for FR-4. For HASL or solder reflow,
bake PCB for 1-2 hours at 121 degrees Celsius.
Arlon 44N PCB material is ideal for use in some applications. This PCB material
features some properties that make it suitable for these applications.
Arlon 44N PCB material is specifically designed to fill up clearance holes. This
prepreg system is ideal for filling up thick metal copper ground planes.
This PCB material is widely used for BGA packaging. BGA packages help to mount
devices like microprocessors. Also, these packages can offer more interconnection
pins than you can put on a flat package.
Arlon 44N is a core material in automotive under-hoods. Also, this material meets the
increasing need for fuel efficiency and high performance. Wire toughs
and battery boxes are examples of under-hood applications.
This is another application that relies on Arlon 44N PCB material. Also, this material
meets the requirements of high layer count multilayer boards. It is thermally stable
and reliable.
Arlon 44N plays a crucial role in designing backplanes and motherboards. Backplanes
function almost the same way as motherboards. Backplanes and motherboards are
printed circuit board that feature connection slots for boards’ expansion. Also, this
PCB enables communication between connected boards.
Conclusion
Arlon 44N PCB material is a core material for fabricating PCBs. Also, this material
meets PCB industry standards. Therefore, it is highly reliable and safe for PCB
fabrication.
Related Posts:
4. Why the Arlon 49N PCB Material Is Useful In High Temperature or High
Performance Applications
https://www.raypcb.com/arlon-44n/