Professional Documents
Culture Documents
Clearing BIOS Passwords
Clearing BIOS Passwords
Clearing BIOS Passwords
3. When the Enter Current Password dialog box appears, enter the wrong password three
times.
4. The Select Item dialog box appears. Select Enter Unlock Password and press Enter
5. The system will generate a backdoor key (example here is 74821572). Keep this screen
shot for reference on the system with the locked BIOS password
Step 2: Obtain Backdoor Password
To obtain the backdoor password, perform the following:
1. Prepare a bootable WINPEx64 USB Flash Disk.
2. Copy the UnlockHD_x64.EXE file to the WINPEx64 UFD.
3. To boot to WINPE, insert the WINPEx64 UFD to another computer or laptop, refer to the
Windows PE procedure in Using DMI Tools.
4. In Windows PE, input unlockhd_64 XXXXXXXX (Where XXXXXXXX is the Backdoor
key; example here is 74821572). The exe will generate a backdoor password (example here
is 61789574).
2. Press Enter after entering the backdoor password to enter the BIOS Setup Menu.
3. Under Security menu option, select ”Set Supervisor Password” and press Enter to set the
supervisor password.
4. Input the backdoor password again (example here is 61789574) in the Enter current
password field, then press Enter to apply next 3 fields to clear the supervisor password.
5. The new setting has been changed and saved. Press Enter.
NOTE:
The BIOS Password can be also cleared by initiating the Crisis Disk Recovery procedure.