Bearing Reference

SELECTION
Guide

UNIFIED SAF Housing Ratings

E-Family Roller
Bearings

P90° P120° P150° P180°

Table 6: USAF Housing Ratings And Cap Bolt Ratings*
Recommended Housing Recommended Cap Cap Bolt
Pillow Block Designation
Cap Loads ♦ Bolt Loads Information ♦
P90 P120 P150 P180 P120 P150 P180 Cap Bolt Torque SAE
Specialty Tapered

USAF USAF USAF USAF

Ib. Ib. Ib. Ib. Ib. Ib. Ib. (No.) Size (Ft-Lb) Grade
Products

509 6600 4200 3600 4600 19800 11300 9900 (4) 3/8-16 24-30 5
510 308 7800 5000 4400 5400 19800 11300 9900 (4) 3/8-16 24-30 5
511 610 310 11400 7165 6575 7875 27120 15600 13560 (4)7/16-14 40-50 5
513 611 311 13360 8260 7680 9200 27120 15600 13560 (4) 7/16-14 40-50 5
515 215 312 13360 8260 7680 9220 36200 20800 18100 (4) 1/2-13 60-75 5
516 216 613 313 12800 8000 7400 8900 57600 33000 28800 (4) 5/8-11 120-150 5
517 217 314 13600 9200 8400 10200 57600 33000 28800 (4) 5/8-11 120-150 5
518 218 615 315 17500 11350 10200 12100 57600 33000 28800 (4) 5/8-11 120-150 5
616 316 17600 12000 10500 12200 57600 33000 28800 (4) 5/8-11 120-150 5
520 220 617 317 22500 14200 12660 14700 85200 48900 42600 (4) 3/4-10 208-260 5
S-2000

522 222 28100 17500 15500 17800 85200 48900 42600 (4) 3/4-10 208-260 5
524 224 620 320 24500 15400 13700 15800 85200 48900 42600 (4) 3/4-10 208-260 5
526 226 622 322 28970 18000 15900 18300 11800 67800 59000 (4) 7/8-9 320-430 5
528 228 35800 22100 19400 22300 154400 88700 77200 (4) 1-8 512-640 5
530 230 624 324 40000 24700 21600 25000 154400 88700 77200 (4) 1-8 512-640 5
532 232 626 326 40200 24800 21700 25100 154400 88700 77200 (4) 1-8 512-640 5
534 234 628 328 52000 32200 28200 33000 154400 88700 77200 (4) 1-8 512-640 5
536 236 630 330 78200 49200 43300 52800 154400 88700 77200 (4) 1-8 512-640 5
UNISPHERE II

538 238 632 332 80600 50800 44800 54800 215200 123000 107600 (4) 1-1/4-7 896-1120 5
540 240 634 334 83800 53000 46700 57500 215200 123000 107600 (4) 1-1/4-7 896-1120 5
544 244 638 338 101800 65600 58200 73800 312000 179000 156000 (4) 1-1/2-6 1560-1950 5
048 83800 53000 46700 54800 215200 123000 107600 (4) 1-1/4-7 896-1120 5
052 101800 65600 58200 73800 312000 179000 156000 (4) 1-1/2-6 1560-1950 5
056 110200 71800 64000 82100 312000 179000 156000 (4) 1-1/2-6 1560-1950 5
* When utilizing heavy cap loads an pillow block housings, the installation must adhere to the following procedures.
1) The pillow block base bolts must have high strength (Grade 8) bolts and be properly tightened to mounting structure.
2) Stop bars (shear strips) must be used against the pillow block where side loads are encountered.
IMPERIAL

3) In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements.
♦ For USDAF housing and Cap Bolt Ratings consult DODGE Application Engineering (864-284-5700).
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION/HOW TO ORDER NOMENCLATURE SELECTION/DIMENSIONS

PAGE B15-3 PAGE B15-7 PAGE B15-8 PAGE B15-26

B15-24