Professional Documents
Culture Documents
Report 6
Report 6
Ministry of Education
university Alasala
Ministry of Education
university Alasala
Objective:
The objective of this report is to recognize this experiment's main to illustrate how power
is calculated and the relation between power, current and voltage. One voltage source is
connected to an ohmic resistor as part of the analysis to make sure that the voltage remains
constant through them all and that the total power through the circuit element is equal to
product of current flowing through and voltage of the source.
Apparatus:
The following equipment was utilized in the experiment:
• 1 Resistor 33ῼ.
• 1 Resistor 100ῼ
• 1 Resistor 220ῼ.
• 1 Multimeter.
• 1 Watt meter
Ministry of Education
university Alasala
Ministry of Education
university Alasala
Ministry of Education
university Alasala
Conclusion:
Ohm's law can be understood and applied in circuits with series & parallel
voltages topologies than to the lab. The setting of the lab helped me to better
grasp how to compare data obtained physically and conceptually, as well as how
to validate these results within an allowable range of error. So, in order to do the
crucial analysis of voltage and current data, we were able to comprehend and
apply Ohm's law and the fundamental equations of electric circuits.There are
two ways to connect resistors in a circuit:
the relationship (I R) and since the current is distributed proportionally according to the
values of the resistors, so the large resistance has a small current
For a small resistor there is a large current, as a result of which the product of each
resistance multiplied by the current passing through it is equal to the potential difference of
the other resistance connected in parallel.
- The equivalent resistance is small and smaller than any resistance that participated in the
conduction process.