Artis 3000U Trouble Shooting For Wrong Positon Lamp On

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Trouble Shooting for Wrong position lighting

Wrong position lighting during online process


Step 1: Delete the printing task in the printer driver of computer.
Control Panel-- Handware and Sound-Devices and Printers(refer to photo as below).
Step 2: Press ENTER/Auto button, the flatbed moves back completely.
Step 3: Press CANCEL button, the wrong position lamp would off and machine back
to normal.

Wrong position lighting after send printing task


Step 1: Disconnect USB cable from computer.
Step 2: Press ENTER button, the flatbed moving back completely.
Step 3: Press CANCEL button, the machine can back to normal.
Step 4: Connect USB cable from computer.
Step 5: Check the settings in Rip software. Check Paper size option is off.
Refill ink lighting
Step 1: Press PAUSE button to see ink carriage move out.
Step 2: Wait for ten seconds.
Step 3: Press PAUSE button again, the ink carriage can back to home position and
machine back to normal.

artisJet Service Manual 2017 – artis 3000U printer www.artisjet.com

You might also like