Professional Documents
Culture Documents
The Impacts of Isola 370HR in PCB Fabrication
The Impacts of Isola 370HR in PCB Fabrication
Table of Contents
Isola 370HR is a high Tg PCB laminate. This laminate comprises the Fr-4 epoxy
resin system. Also, it is specifically designed for multilayer PCB applications. Isola
370HR PCB material has advanced features such as CAF resistance and UV blocking.
Also, this laminate features great dielectric and thermal properties.
Furthermore, the mechanical and thermal performances of this laminate exceed that of
traditional FR-4 materials. Also, Isola 370HR is compatible with Automated Optical
Inspection (AOI) systems. This material is the best for sequential lamination designs.
UV blocking
Isola 370HR offers high throughput during PCB manufacturing and assembly. Also,
this laminate blocks the effect of UV rays on PCBs.
The Tg value of Isola 370HR is 180 degrees Celsius. Also, Isola 370HR features great
thermal performance due to its high Tg value.
The thermal conductivity of Isola 370HR is 0.4 W/m/K. This measures the rate of
heat transfer in a PCB material. The thermal conductivity of Isola 370HR PCB
material contributes to its performance.
CAF resistant
This is another great property of Isola 370HR. This PCB laminate is CAF
resistant. Conductive anodic filament (CAF) causes failures in PCBs. Isola 370HR
PCB material is resistant to CAF and prevents failure in circuit boards. CAF occurs
when a metallic filament is formed from an electrochemical migration process.
This PCB laminate features standard E-glass. Also, the laminate features a square
weave electronic glass reinforcement.
The CTE value of Isola 370HR at z-axis is 45 ppm/ºC. With this property, Isola
370HR is a thermally stable material for PCB applications.
There are two different types of copper foil used in Isola 370HR PCB material. They
include:
This type of copper foil requires treating the electrodeposited copper’s face. The
treatment used is a rough coating. Also, this treatment boosts the base foil adhesion
to Isola 370HR dielectric. The reverse treat foil has a rough surface area ratio
between the range of 1.0 and 1.2. However, this foil features dismal peel strength.
Also, it is prone to delamination.
HTE Grade 3
HTE refers to High Elongation Electrodeposited copper. This type of copper foil is
IPC-4562 Grade 3. The exterior face of the foil is semi-matt. Also, it features anti
tarnish treatment. This reduces oxidation and corrosion during storage. In addition,
the matt side gets Zn/Cr treatment. Therefore, this enhances adhesion to prepreg.
There are several techniques for analyzing the thermal performance of Isola 370HR.
These techniques include:
This analysis can measure the Tg of Isola 370HR. Thermal mechanical analysis
determines the PCB material to measure Tg. Isola 370HR features around a 500%
increase in post-Tg rate. Also, the actual expansion rates depend on the Isola laminate
resin content.
This analysis measures dissipation of energy and modulus properties of Isola 370HR.
Also, these measurements offer quantitative and qualitative details of this material.
This analysis is crucial in evaluating the mechanical properties of viscoelastic
polymeric materials. These are PCB materials that show frequency and temperature
effects.
Dynamic mechanical analysis helps to establish the Tg of resin systems. Also, this
analysis is ideal for evaluating the cure extent and mechanical characteristics of Isola
materials.
This thermal analysis technique establishes the Tg of Isola 370HR. Also, this analysis
measures the flow of heat in and out of Isola 370HR. Changes in heat flow helps to
detect the glass transition.
This product features a thicker subpart which has about 6 to 26 layers. Also, it
comprises about 2 sequential circuitry layers on each side. The center core of Isola
370HR use buried vias.
You will have to join the subparts together. However, you will position the subparts
on the external part of the finished PCB. Use drilled plated through hole to create
connection for the subparts and he finished PCB.
Standard HDI
The Isola 370HR has a thin core at the center. Also, this core features about 2 to 4
layers. For each side, the core has 1 to 3 sequential applied circuitry layers. Microvias
link the external layers. The standard HDI is the commonest approach in Isola 370HR
sequential lamination.
Plasma desmearing is the best desmear method for this PCB material. Also, this
method etches the resin system and provides improved hole wall texturing. Also, you
can perform this method without using a permanganate pass.
Yes, Isola 370HR adheres to the RoHS standards. Therefore, this PCB material is safe
for the environment.
The square weave is ideal for Isola 370HR PCB material. This style has a uniform
yarn count. Also, it features a similar pitch in all areas.
Conclusion
Isola 370HR PCB material is a reliable and high performance material for PCB
fabrication. Also, this PCB material features great properties that enhance PCB
functionality.
Related Posts:
2. Isola I-Tera MT40: A Low Loss and High Reliable Material for PCB
Fabrication
https://www.raypcb.com/isola-370hr-pcb/