Professional Documents
Culture Documents
Final Exam CSWP Sample Exam 111 by Madrelejos Shekinah P.
Final Exam CSWP Sample Exam 111 by Madrelejos Shekinah P.
Step 11. Click Trim Entities, select Power Trim and drag to upper left of the Circle
Step 12. Extrude Cut by 42 mm in depth.
Step 13. Click Right Surface, Draw three Center Circles with the following dimensions:
Step 14. Extrude Cut the larger Circle by 13 mm in depth.
Step 19. Click Front View, Click Sketch, Draw triangle using Line (angle = 20).
Step 20. Extrude Cut by 20mm in depth.
Step 21. Click Right View, Click Sketch, Draw Circle and Line tangent to the circle with
the following dimensions:
Step 22. Extrude Cut by 9mm in depth.
Step 23. Click Sketch and Draw Circle with the following dimension on the image:
Step 24. Extrude Cut, select Through All.
Step 25. Click Right View, Click Sketch, draw a rectangle using Line.
Step 26. Fillet the top corner by 10mm radius.
Step 28. Click Right View, Click Sketch and Draw Corner Rectangle.
Step 29. Extrude Cut, select Through All.
Step 30. Click Top View, Draw a Corner Rectangle with the following dimensions.
Extrude Cut, select Through All.
Step 31. Click Top View, Draw Circle with the following dimensions.
DONE.
ESTIMATED TIME OF WORK: 21 minutes and 39 seconds