1801 Theurer Blvd. Winona MN 55987 Tel.

844-265-2658 Fax 507-494-9664

3939 W 56th St. Indianapolis IN 46254 Tel. 317-216-1189 Fax 317-280-2500
15009 Lee Road Houston, Texas 77032 Tel.713-460-4381 Fax.713-996-7342

Certified Material Test Report

Certificate Number: B37941-1 Date Issued: March 20, 2024
Customer Name: UNION TANK CAR OEM Customer Part Number: 09613-07
Sold To: AOPA Customer P.O.: N/A
DESD 5/8 11 tpi 11 tpi 3-1/4" 12L14
Description: Marking: CNL 12L14
1-1/2" 7/8"/UNC-2A
Finish: PLAIN Cardinal Part Number: 10360697
Quantity Shipped
Material: 12L14 Production Lot Quantity: 8/8

SPECIFICATION / GRADE: In accordance with Supplier Material Test Report

SURFACE QUALITY: In accordance with ASTM F788/F788M-20ᵋ¹ PASS
COATING: N/A

CHEMISTRY – Heat Number: 144335

Heat Composition (WT% Heat Analysis)
Element: C Mn P S Si Pb
Result: 0.073 1.12 0.046 0.306 0.004 0.15/0.35
Element: Cu Ni Cr Mo Al N
Result: 0.049 0.038 0.025 0.01 0.0013 0.0064
MACROETCH (if required): N/A

Page 1 of 2 November 1, 2023

This template was printed on March 20, 2024. Printed template are uncontrolled. Please check the document access location for the current revision:
\\Netapp02\hub_iso_doc$\CORP\Material Certification\COC's
 1801 Theurer Blvd. Winona MN 55987 Tel. 844-265-2658 Fax 507-494-9664
3939 W 56th St. Indianapolis IN 46254 Tel. 317-216-1189 Fax 317-280-2500
15009 Lee Road Houston, Texas 77032 Tel.713-460-4381 Fax.713-996-7342
DIMENSIONAL INSPECTION: Per Cardinal Internal Inspection Plan

Sample
Dimension Data (1) (2) (3) (4) (5)
Size Min
Overall Length: 3 1/4 3 3.2630 3.2535 3.2565 3.2555 3.2510
Thread Length: (1 1/2) 3 1.5160 1.4900 1.4920 1.4915 1.4125
Thread Length: 7/8 3 0.8830 0.8570 0.8775 0.8740 0.8460
Body Diameter: 5/8 3 0.6230 0.6230 0.6225 0.6230 0.6230
Radius: 5/8 3 0.6250 0.6250 0.6250 0.6250 0.6190
Thread: 5/8-11-2A Pitch: 0.5644-0.5589 3 0.5610 0.5610 0.5620 0.5620 0.5615
Thread: 5/8-11-2A Major: 0.6234-0.6113 3 0.6195 0.6190 0.6180 0.6185 0.6180
Thread: 5/8-11-2A Minor: 100-0.4999 3 0.5025 0.5030 0.5060 0.5055 0.5050

Compliancy Statement:
Cardinal Fastener hereby declares that the products supplied as represented in this test report are in compliance with the requirements of
the order as referenced above.

Comments:

Country of Origin: USA

Nabilah Husna Binti Hasbullah

Quality Assurance
Cardinal Fastener

This certified test report shall not be reproduced except in full, without the written approval of Cardinal Fastener. Any deviations or discrepancies that are
detected, or any departures from documented policies or procedures will be noted in the comment/notes section. We certify that the data reported above is a true
representation of the information provided and this test report conforms to DIN EN 10204 3.1. Parts mentioned in this test report were manufactured within
Fastenal’s quality management system. Fastenal is ISO 9001:2015 certified with TUV Rheinland of North America.

Page 2 of 2 November 1, 2023

This template was printed on March 20, 2024. Printed template are uncontrolled. Please check the document access location for the current revision:
\\Netapp02\hub_iso_doc$\CORP\Material Certification\COC's