Professional Documents
Culture Documents
Certified Material Test Report
Certified Material Test Report
Vacuum quenching for 2 hours-Cool to room temperature-Minimum 640℃ degrees 2-4 hours
*¹ Heat Treat Method:
tempering
Attribute Test Method Sample Size Requirement Result Acceptance
Core Hardness ASTM F606/F606M-21 15 20-28 HRC 23-24 HRC PASS
Proof Load ASTM A962/A962M-23a 5 Min: 50,100 lbf PASS PASS
Sample
Dimension Data (1)
Size Min
Width Across Flats: 1.250/1.212 1 1.2340
Width Across Corners: 1.443/1.382 1 1.4080
Head Height: .758/.710 1 0.7550
Thread: 3/4-10-2B Pitch: .6927-.6850 1 PAS
Thread: 3/4-10-2B Major: 100-.7500 1 PASS
Thread: 3/4-10-2B Minor: .6630-.6420 1 0.6630
Compliancy Statement:
Cardinal Fastener hereby declares that the products supplied as represented in this test report are in compliance with the requirements of
the order as referenced above.
Comments:
This certified test report shall not be reproduced except in full, without the written approval of Cardinal Fastener. Any deviations or discrepancies that are
detected, or any departures from documented policies or procedures will be noted in the comment/notes section. We certify that the data reported above is a true
representation of the information provided and this test report conforms to DIN EN 10204 3.1. Parts mentioned in this test report were manufactured within
Fastenal’s quality management system. Fastenal is ISO 9001:2015 certified with TUV Rheinland of North America.