Heat transfer coefficient across an interface is the heat flux per unit area (q) .
across an interface from one material of temperature T, to another material of
temperature T,:
h
q
ie
T,
= heat transfer coefficient (Wm?K-!)
= heat flux at ‘hot’ surface (W.m?)
= temperature on ‘hot’ side of interface (K)
= temperature on ‘cold’ side of interface (K)
NPL& oe >eat transfer coefficient
Heat transfer coefficient is boundary condition for process simulation
In injection moulding & compression moulding
— Polymer to metal
— Polymer-air-metal (GASM, ...)
In extrusion & film blowing
— Polymer to fluid (eg air or water)
investigated the significance of different
project has built apparatus to measure heat transfer coefficient and has
terfaces to commercial processing
NPL eeTotal thermal resistance:
R = total thermal resistance (m2-K.W")
T, = temperature on shot? side of interface (K)
T, = temperature on ‘cold’ side of interface (K)
q = heat flux at ‘hot’ surface (W.m”)
NPL‘ i IldN
Johe| Jo Ayanonpuco jewsoyy si'y
Jake] Jo ssauyoiyy si/x
SEOBHO}U! Je JUSINIYS09 Jajsue.} }eay SI'y :esEyM,
4 saefe| |eENpIAIpul BU}
JO SSOUEISISAI |EWAU} JO WNs = (1-M"y'2tU) Y SOUR]SISA [EWIOU} [e}OL
suQHOSJIP SSeUyoIY}-YBNoU ou} U! MOY Joy UM Wa}shs JeABI-NINW e JO4
biel ij ine) oop TESTS Te ETE