Professional Documents
Culture Documents
MCQ 2
MCQ 2
position if
a. Nature of material
b. Area of contact between surfaces
c. Velocity of sliding
d. All of the above
1. m = m1 + m2
2. m1 l2 = m2 l1
3. m1 l1 = m2 l2
4. IG = IG1 + IG2
a.Condition 1 and condition 2
b. Condition 1 and condition 3
c. Condition 2 and condition 4
d. All the above conditions should be satisfied
9) The balancing of rotating and reciprocating parts of an engine is necessary when it runs
at:
a.slow speed
b.medium speed
c.high speed
d.none of the mentioned
a.mrlω2 cos θ
b. mrlω (cos θ / n)
c. mrlω2 cos 2θ
d. mrω2 cos 2θ
12) At which angle primary unbalanced force in reciprocating engine
mechanism is maximum?
a.0o
b. 90o
c. 360o
d. All of the above
a.x = (A + Bt) e– ωt
b. x = X e– ξωt (sin ωdt + Φ)
c. x = (A – Bt) e– ωt
d. x = X e– ξωt (cos ωdt + Φ)
(a) Cylinder and Piston (b) Piston rod and Connecting rod
17
(c ) Crankshaft and Flywheel (d) Flywheel and Engine frame
The motion between a pair when limited to a definite direction, irrespective of the direction of
force applied is known as
19 When the nature of contact between the element of a pair is such that one element can turn about
the other by screw thread, the pair is known as a