Professional Documents
Culture Documents
2510 PW WRAS Technical DataSheet
2510 PW WRAS Technical DataSheet
2510 PW WRAS Technical DataSheet
DATA SHEET
2510-PW
High Performance Lining
GENERAL DESCRIPTION FORCE CURING
DUROMAR HPL-2510-PW is an easy Typical Physical Properties Force cures can be used to accelerate
to apply, 100% Solids, Zero VOC the cure or to enhance both physical
Max. Dry Operating
epoxy coating system. It is designed and chemical properties. Force curing
Temp 220ºF
for use in drinking water applications should not start until material has
Functional Cure 72 hrs. firmly set. Contact DUROMAR for
requiring certification to WRAS. This
immersion grade lining system may be Full Cure 120 hrs. specific instructions.
used on both concrete and steel Repair System HPL-1110-PW SHELF LIFE
surfaces. Surface Prep SSPC-SP 10 This product has a minimum shelf life
FEATURES of one year when stored in a dry area
Adhesion Excellent
at 50-110ºF in the original sealed
100% Solids, Zero VOC’s Flexibility Good container.
Excellent Immersion Performance HANDLING/SAFETY
Meets Requirements BS6920- Warning! Eye and skin irritant. May
1:2000 and /or 2014 (Suitability of cause dermatitis and sensitization.
Application Information
non – Metallic products for use in
Pot Life @ 70ºF 40 min. Always read and understand the
contact with water)
product MSDS.
Certified by WRAS Equipment Brush, Roller,
Airless Spray Avoid contact with eyes, skin or
CHEMICAL DESCRIPTION clothing. Avoid breathing vapor, mist or
Number of Coats 1-3 spray. Use with good ventilation.
Multifunctional Phenalkamine epoxy.
Theoretical FIRST AID
2
Coverage 40 ft /gal/40 mils
Typical Properties In case of contact:
Film Thickness/Coat 10 mils min. Eyes: Immediately flush with water for
Components 2 15 mils max. at least 15 minutes.
Visual Appearance High Gloss Max. DFT 45 Mils Skin: Immediately remove from skin
Density 1.23 with dry cloth followed by thorough
Recoat Time 4 hr. min.
Solids by Weight 100% washing with soap and water.
@ 70ºF 120 hr. max.
Inhalation: Remove to fresh air. If
Min. Application breathing is difficult, give oxygen.
Chemical Data @ 70ºF Temp. 50 ºF Ingestion: Give large quantity of milk
pH Range 3.0-12 Mixing Ratio or water, induce vomiting. Contact a
by Weight 2.78:1 (B/A) physician immediately.
Acids Good
Mixing Ratio All Duromar products are formulated based on over 25 years of
Alkalis Very Good experience, laboratory tests, material data, field installations,
by Volume 2:1 (B/A) and technical publications, which we believe to be, to the best
of our knowledge, accurate and reliable. This information is
Hydrocarbons Good
Dry to Touch 10 hrs. intended to be used for guidance only. Because the only true
reliable test is one that is in actual operation, Duromar will make
Solvents Fair available at no charge samples of materials for that testing
purpose. Duromar, Inc. has no control over either the quality or
Potable Water Excellent condition of the substrate, or the many factors affecting the use
and application of the product. Duromar, Inc. does, therefore,
not accept any liability arising from loss, injury, or damage
resulting from such use or the contents of this data sheet
(unless there are written agreements stating otherwise). The
data contained herein is liable to modification as a result of
practical experience and continuous product development. This
data sheet replaces and annuls all previous issues, and it is,
therefore, the user’s responsibility to ensure that this sheet is
current prior to using the product.