Professional Documents
Culture Documents
SEW Eurodrive Katalog
SEW Eurodrive Katalog
SEW Eurodrive Katalog
Midwest Region Assembly Center Southwest Region Assembly Center Western Region
SEW-Eurodrive, Inc. SEW-Eurodrive, Inc. SEW-Eurodrive Co. of Canada Ltd.
Troy, OH Dallas,TX Delta, B.C.
2 0 0 2
Tel: (937) 335-0036 Tel: (214) 330-4824 Tel: (604) 946-5535
Fax: (937) 222-4104 Fax: (214) 330-4724 Fax: (604) 946-2513
E-mail: cstroy@seweurodrive.com E-mail: csdallas@seweurodrive.com E-mail: marketing@sew-eurodrive.ca
Northeast Region Assembly Center Western Region Assembly Center Central Region
SEW-Eurodrive, Inc. SEW-Eurodrive, Inc. SEW-Eurodrive Co. of Canada Ltd.
Bridgeport, NJ Hayward, CA Bramalea, ON
Tel: (856) 467-2277 Tel: (510) 487-3560 Tel: (905) 791-1553
Fax: (856) 845-3179 Fax: (510) 487-6381
E-mail: cshayward@seweurodrive.com
Fax: (905) 791-2999 2002
E-mail: csbridgeport@seweurodrive.com E-mail: marketing@sew-eurodrive.ca
Product
Southeast Region Assembly Center Manufacturing Facility Eastern Region
SEW-Eurodrive, Inc. & Corporate Offices SEW-Eurodrive Co. of Canada Ltd. Catalog
Lyman, SC SEW-Eurodrive, Inc. LaSalle, PQ
Tel: (864) 439-7537 Lyman, SC Tel: (514) 367-1124
Fax: (864) 439-7830 Tel: (864) 439-8792 Fax: (514) 367-3677
E-mail: cslyman@seweurodrive.com Fax: (864) 949-3039 E-mail: marketing@sew-eurodrive.ca
Up to 98% Efficient • Superior Uptime • Long Life • Low Maintenance • Compact Design • Modular Components • Custom Assembled
www.seweurodrive.com (USA)
www.sew-eurodrive.ca (Canada)
Printed in USA
9PD0016/0300
28.5K
Power Transmission Solutions
1
2
3 4
5
7
10 6
11 8
12 9
13
14
15
16
Our product range is one of the largest 5 AC motors and brakemotors 13 theSNUGGLER®: Compact
in the industry. Power ratings from from 1/4 to 60 HP. parallel helical speed reducers.
1/4 HP to thousands. Ratios up to Ratings up to 190 HP. Ratios
6 Servo-motors with continuous
30,000:1. to 14,085.
static torque ratings from 20 to
Mix and match modular components 310 lb-in. 14 Parallel helical speed reducers.
to achieve the optimum drive solution. Ratings up to 180 HP. Ratios
7 Additional parallel helical speed
to 28,831.
reducers.
1 VARIMOT®: Friction disc variable-
15 SPIROPLAN®: Right angle
speed modules. Ratings up to 15 8 Input shaft modules.
speed reducers.
HP. Speed range up to 5:1.
9 C-face motor adapters.
16 Low-backlash planetary speed
2 VARIGEAR®: Belt-type variable-
10 Complete family of heavy reducers with integer reduction
speed modules. Ratings up to
industrial bevel-helical speed ratios from 4:1 to 100:1.
60 HP. Speed range up to 8:1.
reducers. Ratings to over
At SEW-Eurodrive, we deliver fast,
3 MOVIMOT®: Smart gearmotors 15,000 HP.
we support even faster, and we take
with their own integrated
11 Right angle helical-worm speed single-source responsibility — from
frequency inverters.
reducers. Ratings up to 25 HP. the electronic motor controller to the
4 FREQUENCY INVERTERS: Ratios to 13,859. last stage of speed reduction.
MOVIDRIVE®: Universal Motor Controller
12 Right angle helical-bevel speed
MOVITRAC® 07: Open loop vector
reducers. Ratings up to 460
electronic controller.
HP. Ratios to 14,526.
Constant Speed Gear Reducers R/F/K/S
MC Compact Series –
Power in its most compact form
The market demands ever more compact designs, increased power density, optimized efficiency, flexible operating options, short
delivery times and a diversified program of mounting options preferably in modular design. Demands that are met by gear units of
the MC Compact Series without any limitations.
A parallel shaft design makes it possible to create a very low-maintenance product that requires little space and can be
manufactured at relatively low cost.The eight models in this series offer a very finely tuned solution for your particular
application.The MC Compact Series consists mainly of standard components which results in short delivery times.
It does not matter what mounting position you need for your application. It is hard to beat these gear units when it comes to
possible mounting positions.The gear units of the MC Compact Series can also be combined with many modules from the
standard product program.
MC Compact Series — Eight sizes of particularly space-saving parallel shaft gear units with or without helical-bevel primary stage.
The modular design makes for a variety of application-specific options. From the swing base for motors to the motor mounting
platform; the adapter for mounting of motors and the backstop to the torque arm.
Constant Speed Gear Reducers R/F/K/S
MC Compact Series
MC..P/R..02 70,000
MC..P/R..03 106,200
MC..P/R..04 141,600
MC..P/R..05 185,850
MC..P/R..06 238,950
MC..P/R..07 327,450
MC..P/R..08 424,800
MC..P/R..09 575,250
Table of Contents
GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
International SI-Units.............................................................................................................................................9
Conversion table for commonly used English - Metric units ............................................................................9
THE SEW-EURODRIVE GROUP OF COMPANIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
What is SEW?.......................................................................................................................................................10
The product range ...............................................................................................................................................10
Content of the catalog .........................................................................................................................................11
Other catalogs......................................................................................................................................................11
PRODUCT DESCRIPTION AND OVERVIEW OF TYPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
General information.............................................................................................................................................12
Versions of SEW gear units ................................................................................................................................14
Nomenclature .......................................................................................................................................................22
ADDITIONAL DOCUMENTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
“Gearmotor” catalog ...........................................................................................................................................24
Operating instructions ........................................................................................................................................24
Gearmotor selection and drive engineering .....................................................................................................24
SELECTION OF GEAR UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Efficiency of SEW gear units ..............................................................................................................................25
Service factor .......................................................................................................................................................27
Overhung and axial loads ...................................................................................................................................30
RM gear units .......................................................................................................................................................34
GEAR UNITS WITH INPUT OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
AD input shaft assembly .....................................................................................................................................37
AM adapter - NEMA or IEC ..................................................................................................................................43
AQ adapter for servomotors ...............................................................................................................................47
AR adapter with torque limiting coupling..........................................................................................................49
MOUNTING POSITIONS AND IMPORTANT ORDER INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . 52
General information about mounting positions................................................................................................52
Important order information ...............................................................................................................................54
Key to the mounting position sheets.................................................................................................................56
Mounting positions of helical gear units ...........................................................................................................57
Mounting positions of parallel shaft helical gear units....................................................................................62
Mounting positions of helical-bevel gear units.................................................................................................65
Mounting positions of helical-worm gear units ................................................................................................70
5
Constant Speed Gear Reducers R/F/K/S
DESIGN AND OPERATING NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Lubricants ............................................................................................................................................................76
Weights .................................................................................................................................................................83
Gear unit mounting..............................................................................................................................................93
Torque arms .........................................................................................................................................................93
Alternate output shafts .......................................................................................................................................94
Metric input shafts ...............................................................................................................................................98
Compound reducers with AD input assembly ..................................................................................................99
Compound reducers with AM adapters ...........................................................................................................100
IMPORTANT NOTES ABOUT DIMENSION SHEETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Information on dimension sheets ....................................................................................................................101
R SERIES SELECTION GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
R.. AD.. ................................................................................................................................................................103
R.. AM..................................................................................................................................................................129
R.. AQ.. ................................................................................................................................................................171
R.. AR.. ................................................................................................................................................................193
R SERIES DIMENSION SHEETS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
R.. AM.. (NEMA)..................................................................................................................................................225
R.. AM.. (IEC) ......................................................................................................................................................279
R.. AQ.. ................................................................................................................................................................281
R.. AR.. ................................................................................................................................................................284
R.. AD.. ................................................................................................................................................................286
R.. AD../P.............................................................................................................................................................287
F SERIES SELECTION GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
F.. AD.. ................................................................................................................................................................291
F.. AM.. ................................................................................................................................................................313
F.. AQ.. ................................................................................................................................................................341
F.. AR.. ................................................................................................................................................................359
F SERIES DIMENSION SHEETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383
F.. AM.. (NEMA) ..................................................................................................................................................383
F.. AM.. (IEC).......................................................................................................................................................443
F.. AQ.. ................................................................................................................................................................445
F.. AR.. ................................................................................................................................................................448
F.. AD.. ................................................................................................................................................................450
F.. AD../P .............................................................................................................................................................451
F.. TorqLOC ........................................................................................................................................................454
6
Constant Speed Gear Reducers R/F/K/S
K SERIES SELECTION GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455
K.. AD.. ................................................................................................................................................................455
K.. AM..................................................................................................................................................................477
K.. AQ.. ................................................................................................................................................................511
K.. AR.. ................................................................................................................................................................531
K SERIES DIMENSION SHEETS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555
K.. AM.. (NEMA)..................................................................................................................................................555
K.. AM.. (IEC) ......................................................................................................................................................619
K.. AQ.. ................................................................................................................................................................621
K.. AR.. ................................................................................................................................................................624
K.. AD.. ................................................................................................................................................................626
K.. AD../P.............................................................................................................................................................627
K.. TorqLOC........................................................................................................................................................630
S SERIES SELECTION GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 631
S.. AD.. ................................................................................................................................................................631
S.. AM.. ................................................................................................................................................................643
S.. AQ.. ................................................................................................................................................................657
S.. AR.. ................................................................................................................................................................669
S SERIES DIMENSION SHEETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 681
S.. AM.. (NEMA) ..................................................................................................................................................681
S.. AM.. (IEC) ......................................................................................................................................................720
S.. AQ.. ................................................................................................................................................................721
S.. AR.. ................................................................................................................................................................724
S.. AD.. ................................................................................................................................................................725
S.. AD../P .............................................................................................................................................................726
S.. TorqLOC ........................................................................................................................................................727
TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729
S, SF, SA, SAF 37...............................................................................................................................................729
S, SF, SA, SAF 47...............................................................................................................................................733
S, SF, SA, SAF 57...............................................................................................................................................737
S, SF, SA, SAF 67...............................................................................................................................................741
S, SF, SA, SAF 77...............................................................................................................................................745
S, SF, SA, SAF 87...............................................................................................................................................749
S, SF, SA, SAF 97...............................................................................................................................................753
ADDRESS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 757
7
Constant Speed Gear Reducers R/F/K/S
Notes
8
Constant Speed Gear Reducers R/F/K/S General Information
1. General Information
1.1. International SI-Units
Type of measure SI Sign SI Unit SI-Units Type of measure SI Sign SI Unit SI-Units
Denomination Denomination
Length l m meter Force F N Newton
Width b m meter Gravity Force G N Newton
2
Height h m meter Pressure p N/m Pascal
Radius r m meter Torque M Nm Newton meter
2 2
Rotary Speed n rpm Inertia J kgm mr
Diameter d m meter Temperature T K Kelvin
Distance s m meter Temperature t °C Celsius
Angle α, β, γ , ... rad radian Work, energy W J Joule
2
Area A,S m Real Power P W Watt
3
Volume V m Apparent Power S VA Volt Ampere
Time t s Second Reactive Power Q VAR Volt Ampere
Cycle Length T s Second Voltage U V Volt
Frequency f Hz Hertz Elec. Current I A Ampere
Velocity v m/s Elec. Resistance R Ω Ohm
2
Acceleration a m/s Elec. Capacity C F Farad
Gravity g m/s2 = 9.81 m/s2 Elec. Inductance L H Henry
Angular rad
Acceleration α s2
Friction Factor µ 1
Mass m kg kilogram Efficiency η 1 EFF.
3
Density g kg/m
9 International SI-Units
The SEW-EURODRIVE Group of Companies Constant Speed Gear Reducers R/F/K/S
SEW possesses many years of experience in drive engineering which it puts to good use when developing, producing and selling
all its drives with components drawn from mechanical and electrical engineering and electronics.
The headquarters of the US operations is located in Lyman, SC. Components for SEW’s modular drive system are manufactured to
the highest quality standards in production plants located in the USA, Germany, France, Brazil and China. These stocked
components are utilized in assembly plants in over 30 industrialized countries all over the world. The assembly plants offer close
proximity to customers and particularly short delivery times for individual drive systems – with a constantly high standard of quality.
SEW’s sales, consulting, customer and spare parts services are to be found in more than 50 countries all over the world.
What is SEW? 10
Constant Speed Gear Reducers R/F/K/S The SEW-EURODRIVE Group of Companies
®
• VARIMOT Variable Speed Gearmotors
®
• VARIGEAR Variable Speed Gearmotors
General information 12
Constant Speed Gear Reducers R/F/K/S Product Description and Overview of Types
13 General information
Product Description and Overview of Types Constant Speed Gear Reducers R/F/K/S
R..
Helical gear unit, foot mounted
02363AXX
RF..
Helical gear unit, flange mounted
02364AXX
R..F
Foot and flange-mounted helical gear unit
2365AXX
RM..
Flange-mounted helical gear unit with
extended bearing housing
02437AXX
RX..
Single-stage foot-mounted helical gear unit
2366AXX
RXF...
Single-stage flange-mounted helical gear unit
2367AXX
F..
Parallel shaft helical gear unit, foot mounted
04668AXX
FA..B
Foot-mounted parallel shaft helical gear unit
with hollow shaft
FV..B
Foot-mounted parallel shaft helical gear unit
with hollow shaft and splined hollow shaft to
DIN 5480
02424AXX
FH..B
Foot-mounted parallel shaft helical gear unit
with hollow shaft and shrink disk
02426AXX
FF..
Parallel shaft helical gear unit in B5 flange-
mounted version
02427AXX
FAF..
Parallel shaft helical gear unit in B5 flange-
mounted version with hollow shaft
FVF..
Parallel shaft helical gear unit in B5 flange-
mounted version with hollow shaft and
splined hollow shaft to DIN 5480
02429AXX
FHF..
Parallel shaft helical gear unit in B5 flange-
mounted version with hollow shaft and shrink
disk
02430AXX
FA..
Parallel shaft helical gear unit with hollow
shaft
FV..
Parallel shaft helical gear unit with hollow
shaft and splined hollow shaft to DIN 5480
02431AXX
FH..
Parallel shaft helical gear unit with keyless hollow
shaft and shrink disk
FT..
Parallel shaft helical gear unit for keyless hollow shaft
mounting with the use of interchangeable
tapered bushings
02434AXX
FAZ..
Parallel shaft helical gear unit in B14 flange-
mounted version with hollow shaft
FVZ..
Parallel shaft helical gear unit in B14 flange-
mounted version with hollow shaft and
splined hollow shaft to DIN 5480
02435AXX
FHZ..
Parallel shaft helical gear unit in B14 flange-
mounted version with hollow shaft and shrink
disk
02436AXX
K..
Helical-bevel gear unit, foot mounted
02438AXX
KA..B
Foot-mounted helical-bevel gear unit with
hollow shaft
KV..B
Foot-mounted helical-bevel gear unit with
hollow shaft and splined hollow shaft to DIN
02439AXX 5480
KH..B
Foot-mounted helical-bevel gear unit with
hollow shaft and shrink disk
02440AXX
KF..
Helical-bevel gear unit in B5 flange-mounted
version
02441AXX
KA F..
Helical-bevel gear unit in B5 flange-mounted
version with hollow shaft
KVF...
Helical-bevel gear unit in B5 flange-mounted
version with hollow shaft and splined hollow
02442AXX shaft to DIN 5480
KHF..
Helical-bevel gear unit in B5 flange-mounted
version with hollow shaft and shrink disk
02443AXX
KA..
Helical-bevel gear unit with hollow shaft
KV..
Helical-bevel gear unit with hollow shaft and
splined hollow shaft to DIN 5480
02444AXX
KH..
Helical-bevel gear unit with keyless hollow shaft
and shrink disk
KT..
Helical-bevel gear unit for keyless hollow shaft
mounting with the use of interchangeable
02445AXX tapered bushings
KAZ..
Helical-bevel gear unit in B14 flange-
mounted version with hollow shaft
KVZ..
Helical-bevel gear unit in B14 flange-
02705AXX
mounted version with hollow shaft and
splined hollow shaft to DIN 5480
KHZ..
Helical-bevel gear unit in B14 flange-
mounted version with hollow shaft and shrink
disk
02446AXX
S..
Helical-worm gear unit, foot mounted
02449AXX
SF..
Helical-worm gear unit in B5 flange-mounted
version
02450AXX
SAF..
Helical-worm gear unit in B5 flange-mounted
version with hollow shaft
02451AXX
SHF..
Helical-worm gear unit in B5 flange-mounted
version with hollow shaft and shrink disk
02452AXX
SA..
Helical-worm gear unit with hollow shaft
02453AXX
SH..
Helical-worm gear unit with keyless hollow shaft
and shrink disk
ST..
Helical-worm gear unit for keyless hollow shaft
mounting with the use of interchangeable
02454AXX tapered bushings
SAZ..
Helical-worm gear unit in B14 flange-
mounted version with hollow shaft
02455AXX
SHZ..
Helical-worm gear unit in B14 flange-
mounted version with hollow shaft and shrink
disk
02456AXX
AD/ZR Input shaft assembly with AR/W Adapter with torque limiting
centering shoulder coupling and speed monitoring
1)
Only in conjunction with VARIGEAR® variable speed gear unit
3.3. Nomenclature
8 9
Variable Speed Integral
Options Motor 14
Severe Duty
Washdown
13
4 ®
5 Movimot
Gearbox Gearbox Inverter
Size Options 10 11 12
Motor Motor Encoder
Speed Options
2
Shaft
Type 6
Input 7
1 Options Mechanical
Gear Variable
Type Speed
3
Mounting
Flange
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Nomenclature 22
Constant Speed Gear Reducers R/F/K/S Product Description and Overview of Types
8 - Variable Speed Options 9 - Integral Motor 10 - Motor Speed (60Hz)
H Handwheel @ 90° DT or DV Standard AC Induction 2 3600 rpm
S Position Dial SDT or SDV 2-Speed 40/100% Duty 4 1800 rpm
HS 90° Handwheel + Position Dial DS or DY Synchronous Servo 6 1200 rpm
BMG Brake on Pulley Shaft 8 900 rpm
B Nitrated Pulleys 4/2 1800/3600 rpm
B Chrome Disc 8/4 900/1800 rpm
N No Handwheel 6/2 1200/3600 rpm
EF Remote Speed Control 8/2 900/3600 rpm
DA Digital Meter 12/2 600/3600 rpm
IG Pickup w/o Meter
®
U No Vents on Varigear
®
GH Gear Half of Varimot
11 - Motor Options
BMG __ Motor Brake (71 - 132S) HR Lever Type Brake Release U TENV VR Vent Fan 24V
BM__ Motor Brake (132M +) IS 12-Pin Plug Connector Z Cast Iron Fan VY Vent Fan Servo
(for Quick Disconnect) (High Inertia)
B Servo Brake AS Harting Plug Connector VS Vent Fan 1 Phase TF Thermistors
(for Quick Disconnect) (Controller Needed)
HF Screw Type Brake Release RS Backstop V Vent Fan 3 Phase TH Thermostats
C Canopy
12 - Encoder
1-Type 2-Shaft 3-Size 4-Signal
E Incremental Encoder S Spread Shaft All Solid Shafts A Hardware Less Encoder T 5 VDC In 5 VDC TTL Out
1 15-24 VDC In SSI Interface
A Absolute Encoder V Solid Shaft Spread Shaft (71 - 100L) C 24 VDC In 24 VDC HTL Out Y
Out (SEW Absolute)
N Proximity Sensor H Hollow Shaft Spread Shaft (112 - 132S) R 24 VDC In 5VDC TTL Out 6 24 VDC In 6 Pulses/Rev Out
2
X Non-SEW Encoder All Proximity Sensors S 24 VDC In 1V SS Sin/Cos Out
23 Nomenclature
Additional documentation Constant Speed Gear Reducers R/F/K/S
4. Additional documentation
In additiion to the information in this catalog, SEW offers you extensive documentation covering the entire topic of electrical drive
engineering. This includes the publications in the “Drive Engineering - Practical Implementation” series as well as the handbooks
and catalogs for electronically controlled drives.
The SEW home page (http://www.seweurodrive.com) provides links to the current SEW documentation which you can order or
download. The list below includes other documents associated with the application of SEW products. You can order these
publications from SEW.
• Application information
• Technical data
• Selection tables
• Dimension sheets
It gives you detailed information for selecting SEW geared motors, AC (brake) motors and their accessories, as well as about their
functional principles.
• Installation
• Mounting
• Disassembly
• Startup
• Inspection
• Maintenance
• Troubleshooting
for SEW gear units as well as components on the input side and accessories.
The “Drive Engineering - Practical Implementation, Drive Arrangements with SEW Drives” publication contains extensive
information about the properties, differentiating characteristics and fields of application of SEW drives. This publication contains an
extensive library of the most important drive calculation formulas as well as detailed examples of the most frequently used
applications. This information is an important tool for selecting and applying SEW product products.
“Gearmotor” catalog 24
Constant Speed Gear Reducers R/F/K/S Selection of Gear Units
• Input speed
SEW helical-worm gear units are designed with a helical gear set in the first stage which makes them significantly more
efficient than one and two stage worm gear units. The efficiency may reach η < 0.5 if the worm gear stage has a very high
gear ratio.
Self-locking
Back driving torques on helical-worm gear units produce a reverse efficiency of η' = 2 - 1/η, which is significantly less
favorable than the forwards efficiency η.
Running-in phase
The tooth flanks of new helical-worm gear units are not completely smooth. The friction angle is greater and thus efficiency is
lower than during later operation. This effect becomes more pronounced the greater the gear ratio. Subtract the following
values from the listed efficiency during the running-in phase:
The running-in phase normally lasts 24 hours. The helical-worm gear units achieve the rated efficiency levels specified in the
list when
If possible, use the basic mounting position M1 for R, K and S gear units in order to keep the churning losses low.
fB 24* 16* 8*
(III)
1.8 1.7 1.6
1.5
1.7 1.6 (II)
1.5 1.4
1.6
1.3
1.4
1.5 1.2 (I)
1.3
1.1
1.4
1.2 1.0
1.3 1.1
0.9
1.2 1.0 0.8
0 200 400 600 800 1000 1200 1400 Z [1/h] **
Load classification
Three load classifications are differentiated:
27 Service factor
Selection of Gear Units Constant Speed Gear Reducers R/F/K/S
Load
Inertia acceleration factor =
Motor inertia
“All external mass moments of inertia” are the mass moments of inertia of the driven machine and the gear unit, scaled down
to the motor speed. The calculation for scaling down to the motor speed is performed using the following formula:
2
n
JX = J •
nM
“Inertia at the motor end” is the mass moment of inertia of the motor and, if fitted, the brake and the flywheel fan (Z fan).
Service factors fB > 1.8 may occur with large mass acceleration factors (> 10), high levels of play in the transmission elements
or large overhung loads. Please contact SEW in this case.
Example
Inertia acceleration factor 2.5 (load classification II), 14 hours/day operating time and 300 cycles/hour produce a service
factor fB = 1.51 as shown in the graphic on page 27.
Service factor 28
Constant Speed Gear Reducers R/F/K/S Selection of Gear Units
The additional service factors fB1 and fB2 can be determined by referring to the diagrams below. The load classification is
taken into consideration in fB1 in the same way as in fB.
fB1
(I)
1.8
(II)
1.6
fB2
(III)
1.4 1.0
1.2 0.8
1.0 0.6
-20 -10 20 30 40 ˚C 50 0 20 40 60 80 100 %ED
The total service factor for helical-worm gear units is calculated as follows:
f Btot = f B • f B1• f B2
Example
The gear unit with the service factor fB = 1.51 in the previous example is to be a helical-worm gear unit.
29 Service factor
Selection of Gear Units Constant Speed Gear Reducers R/F/K/S
The overhung load exerted on the motor or gear shaft is then calculated as follows:
2T
F= • fZ
d0
F = Equivalent OHL in lbs
T = Load torque on the drive in lb-in
d0 = Pitch diameter of the gear, sprocket, or sheave in inches
fZ = Transmission element factor
The permitted overhung loads FRa for the output shafts of foot-mounted gear units with a solid shaft are listed in the selection
tables. Please contact SEW if further assistance is needed.
Note: The data refer to the radial force acting midway on the shaft end
(with right-angle gear units on the A-side output). Worst case conditions
have been assumed for the force application angle and the direction
of rotation.
• Only 50% of the FRa value specified in the selection tables is permitted in mounting position M1
with wall attachment on the front face for K and S gear units.
• Helical-bevel gear units K167 and K187 in mounting positions M1 to M4: A maximum of 50% of
the overhung load FRa specified in the selection tables in the case of gear unit mounting other
than as shown in the mounting position sheets.
• Foot and flange-mounted helical gear units (R..F): A maximum of 50% of the overhung load FRa
specified in the selection tables in the case of torque transmission via the flange mounting.
X
α α FX
0˚ FA
0˚
Please contact SEW for all other types of gear unit and in the event of significantly greater axial loads or combinations of
overhung load and axial load.
• FRa (lb.) - Permissible overhung load at the midpoint of the output shaft extension — see
selection tables.
• X (in.) - Distance from the shoulder on the output shaft to the application point of load.
The permissible OHL is the smaller of the two values obtained from the following calculations, FXL and FXW, and is denoted as
FX. The permissible OHL, FX, must be greater than the calculated equivalent overhung load, F.
c
Permissible OHL, FXL = FRa • (lb.)
d+x
a • 103
Permissible OHL based on shaft stress, FXW = (lb.)
b+x
Note: FXW applies only when reducer torque, Ta, is maximum.
Shaft Midpoint
Frame Size a b c d
lb-in. in. in. in.
RX/RXF 57 1.34 1.35 1.71 0.93
RX/RXF 67 2.14 1.56 2.07 1.08
RX/RXF 77 1.73 0 2.38 1.20
RX/RXF 87 6.81 1.93 2.89 1.32
RX/RXF 97 12.66 2.12 3.41 1.44
RX/RXF 107 21.86 2.45 4.04 1.67
R/RF 17 0.58 0.67 3.48 2.70
R/RF 27 1.38 0.46 4.19 3.21
R/RF 37 1.10 0 4.65 3.66
R/RF 47 2.16 0.59 5.39 4.21
R/RF 57 3.34 0.71 5.81 4.43
R/RF 67 2.22 0 6.63 5.26
R/RF 77 3.51 0 6.84 5.26
R/RF 87 7.50 0 8.53 6.56
R/RF 97 10.53 0 10.06 7.70
R/RF 107 18.23 0 11.24 8.48
R/RF 137 54.34 1.18 13.52 10.18
R/RF 147 76.55 1.30 15.83 11.69
R/RF 167 111.51 0 17.72 13.58
F 37 0.95 0 4.86 3.88
F 47 1.58 0 6.04 4.86
F 57 4.86 1.26 6.72 5.34
F 67 3.65 0 7.14 5.56
F 77 6.96 0 8.50 6.53
F 87 10.53 0 10.35 7.99
F 97 18.50 0 13.78 11.02
F 107 37.44 0 14.70 11.36
F 127 83.63 0 17.42 13.29
F 157 92.93 0 20.16 16.02
K 37 1.25 0 4.86 3.88
K 47 1.58 0 6.04 4.86
K 57 6.02 1.22 6.68 5.30
K 67 3.65 0 7.14 5.56
K 77 6.81 0 8.50 6.53
K 87 14.51 0 9.92 7.56
K 97 24.78 0 12.56 9.80
K 107 48.94 0 14.70 11.36
K 127 73.54 0 17.46 13.33
K 157 104.4 0 20.04 15.91
K 167 166.4 0 24.47 19.55
K 187 269.0 0 28.37 22.07
S 37 0.53 0 4.67 3.88
S 47 1.18 0 5.12 4.13
S 57 1.89 0 5.91 4.72
S 67 2.69 0 7.24 5.87
S 77 4.66 0 8.82 7.05
S 87 14.87 0 11.08 8.72
S 97 22.48 0 12.85 10.09
yes
yes
no
Check overhung load (flange)? no
FR ≤ FXF= c F /(FF+x)
Check axial load? no (FR• x/FAa )< 100 yes Fa/Ma > 3
Fa ≤ FAa
yes
yes
Special solution
Check connection dimensions on request from SEW
End of
Poject Planning
Project planning for RM gear units
RM gear units 34
Constant Speed Gear Reducers R/F/K/S Selection of Gear Units
na (rpm)
< 16 16-25 26-40 41-60 61-100 101-160 161-250 251-400
FRa (lb) 90 90 90 90 90 91 92 93
RM57
FAa (lb) 4230 3380 2590 2180 1600 1270 1000 860
FRa (lb) 129 129 129 131 129 132 133 135
RM67
FAa (lb) 4280 4250 3440 2680 2070 1680 1320 1140
FRa (lb) 270 270 270 270 270 270 270 275
RM77
FAa (lb) 4950 4950 4370 3400 2570 2070 1620 1510
FRa (lb) 445 445 445 445 445 450 450 450
RM87
FAa (lb) 6750 6750 5310 4050 3220 2480 2010 1810
FRa (lb) 670 675 670 675 675 685 690 695
RM97
FAa (lb) 9000 8120 6140 4570 3580 2840 2170 1760
FRa (lb) 950 950 950 950 950 950 805 860
RM107
FAa (lb) 10800 9230 6820 5180 4050 2950 2150 2030
FRa (lb) 1960 1960 1960 1960 1620 1140 900 1520
RM137
FAa (lb) 15800 15800 15800 13000 10600 9900 8010 7290
FRa (lb) 2500 2500 2500 2500 2500 2390 1940 2430
RM147
FAa (lb) 15750 15800 15700 13100 10300 8550 7380 6930
FRa (lb) 3290 3290 3290 3290 3290 3310 - -
RM167
FAa (lb) 15800 15800 15800 13600 10200 8300 - -
na (rpm)
< 16 16-25 26-40 41-60 61-100 101-160 161-250 251-400
FRa (lb) 92 92 92 92 92 93 93 95
RM57
FAa (lb) 2720 2160 1650 1360 970 755 585 495
FRa (lb) 133 133 133 134 133 134 135 136
RM67
FAa (lb) 3560 2700 2160 1650 1260 1000 780 660
FRa (lb) 270 270 270 270 270 275 275 275
RM77
FAa (lb) 4500 3470 2680 2040 1500 1190 900 830
FRa (lb) 450 450 450 450 450 385 380 385
RM87
FAa (lb) 5540 4320 3220 2390 1840 1370 1240 1090
FRa (lb) 685 685 685 685 690 695 570 545
RM97
FAa (lb) 6390 4950 3650 2610 1990 1540 1310 1070
FRa (lb) 970 970 970 970 970 755 630 675
RM107
FAa (lb) 7270 5580 4010 2930 2200 1840 1340 1260
FRa (lb) 1990 1990 1990 1990 1270 900 720 1180
RM137
FAa (lb) 15800 13500 10800 8530 7610 7130 5760 5240
FRa (lb) 2570 2570 2570 2570 2570 1870 1540 1900
RM147
FAa (lb) 15800 13600 10300 8980 7540 6280 5420 5090
FRa (lb) 3400 3400 3400 3400 3400 2950 - -
RM167
FAa (lb) 15800 14300 11600 8510 6030 5310 - -
35 RM gear units
Selection of Gear Units Constant Speed Gear Reducers R/F/K/S
RM gear units 36
Constant Speed Gear Reducers R/F/K/S Gear Units with Input Options
SEW Helical, parallel shaft helical, helical-bevel and helical-worm gear units are equipped with an input shaft assembly. The input
shafts have inch dimensions. Metric dimensions are provided on request. The end of the input shaft has a tapped hole to aid in
mounting drive components.
The bearings of the input shaft are lubricated by grease. Natural Buna Rubber oil seals and o-ring seals are used for sealing
the cover. The rugged bearings of the input shaft permit high overhung loads. Consult your SEW assembly facility if oil bath
lubricated bearings are required.
AD../RS backstop
The input shaft assembly can be configured with a backstop if the application only requires one direction of rotation.
Backstops with centrifugally disengaging wedge elements are used. This design offers the advantage that, above a certain
speed (lift-off speed), the wedge elements lift off the contacting surface and rotate with the shaft. As a result, the backstops
operate with no wear or power loss. They are maintenance-free and can be used at high speeds.
Dimensions:
The backstop is completely integrated within the input cover. There is no difference in dimensions between an input shaft
assembly with or without a backstop.
Locking torques:
Caution:
To avoid damage, the direction of rotation of the drive must be checked before
starting up the machine.
CCW CW
A
CW
CCW
Specify output direction of rotation when ordering
CCW - Counterclockwise
CW - Clockwise
Helical gear unit with input shaft assembly and AD../P motor mounting platform
The available gear unit / motor combinations for input shaft assemblies with motor mounting platforms can be found in the
corresponding dimension sheets.
Thermal limit power for gear units with input shaft assembly
The power values given in the selection tables for gear units with input shaft assemblies are mechanical limit powers.
However, gear units may become thermally overloaded before they reach the mechanical power limit. This depends on the
mounting position. For mineral oils, corresponding cases are indicated in the selection tables by having the mounting position
specified.
Please contact SEW if the mounting position you require is the same as one of those indicated. By considering the actual
operating conditions, it will then be possible to recalculate the thermal limit power based on the specific application.
Alternatively, suitable measures can be taken (e.g. using a synthetic lubricant with higher thermal stability) to increase the
thermal limit power of the gear unit. The following data is required for the evaluation:
Notes
AM adapters are used for mounting motors built according to the IEC standard or NEMA (design C or TC) onto SEW helical, parallel
shaft helical, helical-bevel and helical-worm gear units. Adapters for NEMA motors are available for sizes 56 to 365. Adapters for
IEC motors are available for sizes 63 to 280.
The designation of the adapter size corresponds to the relevant NEMA or IEC motor size.
Torque is transmitted between the motor and the gear unit via a positive shock resistant jaw-type coupling. Vibrations and shocks
which occur during operation are cushioned by an inserted polyurethane annular gear.
Power ratings, moments of inertia
Pm1) Jadapter
NEMA IEC
HP lb-ft2
AM56 AM63/71 .75 10.45 • 10-4
AM143 AM80 1 45.125 • 10-4
AM145 AM90 2 45.125 • 10-4
AM182 AM100 3 123.5 • 10-4
AM184 AM112 5 123.5 • 10-4
AM213/215 AM132S/M, 10 451.25 • 10
-4
AM132/ML
-4
AM254/256 AM160 20 2161.25 • 10
AM284/286 AM180 30 2137.5 • 10-4
AM324-AM326 AM200/225 50 4132.5 • 10-4
AM364-AM365 - 75 4108.75 • 10-4
- AM250/280 120 16268.75 • 10-4
1)
Maximum rated power of the mounted standard electric motor at 1750 rpm
Backstop AM../ RS
The AM adapter can be configured with a backstop if the application only requires one direction of rotation. Backstops with
centrifugally disengaging wedge elements are used. This design offers the advantage that, above a certain speed (lift-off
speed), the wedge elements move around inside the backstop without making contact. As a result, the backstops operate
with no wear or power loss. They are maintenance-free and can be used at high speeds.
Dimensions:
The backstop is completely integrated within the adapter. This means there is no difference in dimensions between an
adapter with or without a backstop (see dimension sheets in the AM adapter section).
Locking torques:
To avoid damage, the direction of rotation of the drive must be checked before starting up the machine.
CCW CW
A
CW
CCW
CCW - Counterclockwise
CW - Clockwise
An adapter with a square flange is used for mounting servomotors onto SEW helical, parallel shaft helical, helical-bevel and
helical-worm gear units.
The torque is transmitted via a jaw-type coupling. Possible vibrations and shocks which occur during operation are effectively
cushioned and dissipated by an inserted polyurethane annular gear.
Configuration variants
The clutch half on the motor side can be configured either with a clamping ring hub (non-positive, for smooth motor shafts) or
a keyway (positive) as required.
Ta max2) Jadapter
Type Pinion Diameter
2 2
mm lb-ft Nm lb-ft kgm
10 68.145 7.7 -4 -4
AQ..80/.. 18.2875 •10 0.77•10
12 115.05 13
AQ..100/.. 10 68.145 7.7
12 115.05 13 -4 -4
AQ..115/1 33.25 •10 1.4•10
14 132.75 15
AQ..115/2 16 132.75 15
10 68.145 7.7
12 115.05 13 -4 -4
AQ..115/3 73.625 •10 3.1•10
14 168.15 19
16 265.5 30
AQ..140/1 16 265.5 30
-4 -4
18 362.85 41 121.125 •10 5.1•10
AQ..140/2 22 469.05 53
16 265.5 30
-4 -4
AQ..140/3 18 362.85 41 211.375 •10 8.9•10
22 663.75 75
AQ..190/1 22 663.75 75 -4 -4
332.5 •10 14•10
AQ..190/2 28 1283.25 145
22 663.75 75 -4
AQ..190/3 522.5 •10 22•10-4
28 1504.5 170
1)
Depends on the ratio, please contact SEW
2)
Maximum permitted input torque
• Flange dimensions (edge length, diameter, centering shoulder and hole circle)
• Maximum torque
Please do not hesitate to contact us if you have any questions about selection and project planning.
Selection of the gear unit
SEW helical, parallel shaft helical, helical-bevel and helical-worm gear units are configured with an adapter and torque
limiting coupling in order to protect the machine and the drive against overload. IEC standard motors of sizes 71 to 180 can
be mounted.
The torque is transmitted through a non-positive engagement involving friction ring pads. The slip torque of the coupling is set
using a setting nut and cup springs. Various slip torques are possible depending on the thickness and arrangement of the cup
springs. In the event of an overload, the coupling slips and interrupts the powerflow between the motor and the gear unit. This
prevents damage to the machine and the gear drive.
As a result, the gear unit can be selected using the selection tables for AM adapters. In this case, substitute the unit
designation AM with AR and ascertain the required slip torque.
When you order a gear unit with an adapter and torque limiting coupling, the required slip torque of the coupling must be specified.
If no information is given in the order, the unit will be set to the maximum permitted output torque of the gear unit.
2) 2) 2)
Pm1) TR TR TR
Type
HP lb-in lb-in lb-in
AR71 0.5 8.8 - 53 54 - 142 -
AR80 1.0 8.8 - 53 54 - 142 -
AR90 2.0 8.8 - 53 54 - 285 -
AR100 4.0 44 - 115 124 - 710 -
AR112 5.4 44 - 115 124 - 710 -
AR132S/M 10.0 133 - 285 290 - 1150 -
AR132ML 12.5 133 - 285 290 - 1150 -
AR160 20.0 133 - 285 290 - 1150 1160 - 1770
AR180 30.0 220 - 1150 1160 - 2660 -
1)
Maximum rated power of the mounted standard electric motor at 1750 rpm
2)
Slip torque which can be set based on the cup springs installed
The speed of the output end coupling half of the torque limiting coupling is monitored with a proximity-type
method using a trip cam and an inductive encoder. The speed monitor compares the pulses against a
defined reference speed. The output relay (either NC or NO contact) switches when the speed drops below
the specified speed (overload). The monitor is equipped with a starting bypass to suppress fault messages
during the starting phase. This can be set within a time window of 0.5 – 15 seconds.
The reference speed, starting bypass and switching hysteresis can be set on the speed monitor.
1 Trip cam
2 Encoder (adapter)
3 Carrier disk
4 Friction ring pads
5 Cup spring
6 Slotted round nut
7 Friction hub
8 Speed monitor
Terminal assignment
1 Relay output
2 Connection voltage 230 VAC (47 – 63 Hz)
3 External slip reset
4 Connection voltage 24 VDC
5 Jumper for synchronous operation monitoring Terminal assignment
6 Signal
7 Encoder
8 Encoder 1
9 Encoder 2
/W Speed monitor
/WS Slip monitor
Dimensions
M6 M6
M1 M1
M2 M2
M5 M5
M4 M4
R..
M3 M3
M6
M6 M1
M2
M2
M1
M5
M5 M4
M4
F..
M3 M3
M6
M1
M1 M6
M2 M2
M5
M5
M4
K..
M4 S..
M3 M3
05031AXX
Comparison of old/new
The following table shows how the former SEW mounting position designations have been transferred into the new system:
Example:
A KA77B helical-bevel gear unit which previously had the mounting position designation B3I or B6II is now specified using the
mounting position designation M4.
CCW CW
A
CW
CCW
Direction of rotation of the output with a backstop
CW — Clockwise
CCW — Counterclockwise
• (A or B and A+B).
B
A
Sample Orders
Symbol Meaning
Breather valve
Churning losses
Increased churning losses may arise in some mounting positions. Please contact SEW in case of the following combinations:
Mounting Position Gear Reducer Type Gear Reducer Size Input Speed (rpm)
97 – 107 > 2500
M2, M4 R
> 107 >1500
97 – 107 > 2500
F
> 107 > 1500
M2, M3, M4, M5, M6 K 77 – 107 > 2500
> 107 > 1500
S 77 – 97 > 2500
57
Constant Speed Gear Reducers R/F/K/S
58
Constant Speed Gear Reducers R/F/K/S
59
Constant Speed Gear Reducers R/F/K/S
60
Constant Speed Gear Reducers R/F/K/S
61
Constant Speed Gear Reducers R/F/K/S
62
Constant Speed Gear Reducers R/F/K/S
63
Constant Speed Gear Reducers R/F/K/S
64
Constant Speed Gear Reducers R/F/K/S
65
Constant Speed Gear Reducers R/F/K/S
66
Constant Speed Gear Reducers R/F/K/S
67
Constant Speed Gear Reducers R/F/K/S
68
Constant Speed Gear Reducers R/F/K/S
69
Constant Speed Gear Reducers R/F/K/S
70
Constant Speed Gear Reducers R/F/K/S
71
Constant Speed Gear Reducers R/F/K/S
72
Constant Speed Gear Reducers R/F/K/S
73
Constant Speed Gear Reducers R/F/K/S
74
Constant Speed Gear Reducers R/F/K/S
75
Design and Operating Notes Constant Speed Gear Reducers R/F/K/S
• For fast-running bearings (motor and gear unit input end): Fill the cavities between the roll
barrels one third full with grease.
• For slow-running bearings (in gear units and gear unit output end): Fill the cavities between the
roll barrels two thirds full with grease.
Lubricants 76
Constant Speed Gear Reducers R/F/K/S Design and Operating Notes
Lubricant table
6)
Oil
Oil
ISO, NLGI Mobil®
˚C -50 0 +50 +100 DIN (ISO)
Standard Mobilgear Shell Omala Klüberoil Aral Degol BP Energol Tribol Optigear Renolin
R... -10 +40 CLP(CC) VG 220
220 GEM 1-220 BG 220 GR-XP220 1100/220
Meropa 220
BM 220
630 CLP220
CLPPG Mobil Shell Tivela Klübersynth Aral Degol BP Enersyn Synlube
Tribol Optiflex A
-25 +80 VG 220
Glygolyle 30 WB GH 6-220 GS 220 SG-XP 220 CLP220
800/220 220
4) Mobil Shell Omala Klübersynth Aral Degol Pinnacle Optigear Syn-Renolin Unisyn
Tribol
-40 +80 VG 220
SHC 630 220 HD EG 4-220 PAS 220 EP 220 thetic A 220 CLP220
1510/220
K...(HK...) CLPHC
4) -40 +40 Mobil Klübersynth Pinnacle
VG 150
SHC 629 EG 4-150 EP 150
-20 +25 CLP(CC) VG 150 Mobilgear Shell Omala Klüberoil Aral Degol BP Energol Tribol Optigear Renolin
Meropa 150
VG 100 627 100 GEM 1-150 BG 100 GR-XP100 1100/100 BM 100 CLP150
-30 +10 HLP(HM) VG 68-46 Mobil Shell Tellus Klüberoil Aral Degol Tribol Rando EP Optigear Renolin
F... VG 32 D.T.E. 13M T 32 GEM 1-68 BG 46 1100/68 Ashless 46 32 B 46 HVI
4) Mobil Klüber-Summit Cetus
-40 +10 CLPHC VG 32 HySyn FG-32
SHC 624 PAO 46
4) -40 -20 HLP(HM) VG 22 Mobil Shell Tellus Isoflex BP Energol Rando
VG 15 D.T.E. 11M T 15 MT 30 ROT HLP-HM 10 HDZ 15
Standard Optigear Renolin
0 +40 CLP (CC) VG 680 Mobilgear Shell Omala Klüberoil Aral Degol BP Energol Tribol
Meropa 680
636 680 GEM 1-680 BG 680 GR-XP 680 1100/680 BM 680 CLP680
-20 +60 CLP PG VG 680
1) Mobil Glygoyle Klübersynth BP Enersyn Tribol Synlube
HE 680 GH 6-680 SG-XP680 800/680 CLP680
S...(HS...) 4) Mobil Shell Omala Klübersynth Pinnacle
-30 +80 VG 460 EP 460
SHC 634 460 HD EG 4-460
CLP HC
4) Mobil Klübersynth Pinnacle
-40 +10 VG 150 EP 150
SHC 629 EG 4-150
-20 +10 CLP (CC) VG 150 Mobilgear Shell Omala Klüberoil Aral Degol BP Energol Tribol Optigear Renolin
VG 100 Meropa 100
HLP(HM) 627 100 GEM 1-150 BG 100 GR-XP100 1100/100 BM 100 CLP150
1) Mobil Klübersynth Tribol Synlube Optiflex A
-25 +20 CLP PG VG 220 Glygoyle 30 GH 6-220 800/220 CLP220 220
4) CLPHC Mobil Klüber-Summit Cetus
-40 0 VG 32 HySyn FG-32 PAO 46
SHC 624
4) -30 +40
7) Shell Cassida Klüberoil Aral Eural Optileb
R..., K...(HK...), HCE VG 460 Fluid GL460 4UH1-460 Gear 460 GT 460
F..., S...(HS...) -20 +40 E
8) VG 460 Klüberbio Aral Degol Optisynt
CA2-460 BAB 460 BS 460
Standard 2) Klüber SEW
W...(HW...) -20 +40 SEW PG VG 460 HT-460-5
4) SAE 75W90 Mobilube SHC
-40 +10 API GL5 (~VG 100) 75 W90-LS
-20 +40 CLPPG 7) VG 460
3) Klübersynth
UH1 6-460
5) Glygoyle Shell Tivela Klübersynth Multifak
R32 -25 +60
DIN 00 Grease 00 Compound A GE 46-1200 6833 EP00
R302 Standard 51 818
000 - 0 Mobilux Shell Alvania Aralub BP Energrease Multifak Longtime Renolin
-15 +40 EP 004 GL00 MFL 00 LS-EP00 EP 000 PD 00 SF 7 - 041
The lubricant table above shows the permitted lubricants for SEW gear units. Please note the following key to the lubricant table.
Key to the lubricant table
CLP = Mineral oil 1) Helical-worm gear units with PG oil: Please contact SEW
CLP PG = Polyglycol (W gear units, conforms to USDA-H1) 2) Special lubricant for Spiroplan® gear units only
CLP HC = Synthetic hydrocarbons 3) Recommendation: Select SEW fB ≥ 1.2
E = Ester oil (water pollution danger category WGK 1) 4) Note critical starting behavior at low temperatures!
HCE = Synthetic hydrocarbons + ester oil (USDA - H1 certification) 5) Low-viscosity grease
HLP = Hydraulic oil 6) Ambient temperature
= Synthetic lubricant (= synthetic-based anti-friction bearing 7) Lubricant for the food processing industry
grease)
8) Biodegradable oil (lubricant for use in agriculture, forestry and water
= Mineral lubricant (= mineral-based anti-friction bearing grease)
resources)
77 Lubricants
Design and Operating Notes Constant Speed Gear Reducers R/F/K/S
The following tables show guide values for lubricant fill quantities depending on the mounting position M1 – M6.
Helical (R) gear units
Fill Quantities
Gear Unit M1 M2 M3 M4 M5 M6
Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters
RX57 0.16 0.6 0.21 0.8 0.34 1.3 0.34 1.3 0.24 0.9 0.24 0.9
RX67 0.21 0.8 0.21 0.8 0.45 1.7 0.50 1.9 0.29 1.1 0.29 1.1
RX77 0.29 1.1 0.40 1.5 0.69 2.6 0.71 2.7 0.42 1.6 0.42 1.6
RX87 0.45 1.7 0.66 2.5 1.27 4.8 1.27 4.8 0.77 2.9 0.77 2.9
RX97 0.55 2.1 0.90 3.4 1.95 7.4 1.85 7.0 1.27 4.8 1.27 4.8
RX107 1.03 3.9 1.48 5.6 3.06 11.6 3.14 11.9 2.03 7.7 2.03 7.7
RXF57 0.13 0.5 0.21 0.8 0.29 1.1 0.29 1.1 0.18 0.7 0.18 0.7
RXF67 0.18 0.7 0.21 0.8 0.40 1.5 0.45 1.7 0.26 1.0 0.26 1.0
RXF77 0.24 0.9 0.40 1.5 0.63 2.4 0.53 2.0 0.42 1.6 0.42 1.6
RXF87 0.42 1.6 0.66 2.5 1.29 4.9 1.24 4.7 0.77 2.9 0.77 2.9
RXF97 0.55 2.1 0.95 3.6 1.87 7.1 1.85 7.0 1.27 4.8 1.27 4.8
RXF107 0.82 3.1 1.56 5.9 2.96 11.2 2.77 10.5 1.90 7.2 1.90 7.2
Fill Quantities
1) 1) 2) 2)
Gear Unit M1 M2 M3 M4 M5 M6
Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters
R17/R17F 0.07 0.25 0.15 0.55 0.09 0.35 0.15 0.55 0.09 0.35 0.09 0.35
R27/R27F 0.07 (0.11) 0.25 (0.4) 0.18 0.70 0.13 0.50 0.18 0.70 0.13 0.50 0.13 0.50
R37/R37F 0.08 (0.25) 0.3 (0.95) 0.22 0.85 0.25 0.95 0.28 1.05 0.20 0.75 0.25 0.95
R47/R47F 0.18 (0.40) 0.7 (1.5) 0.42 1.60 0.40 1.5 0.44 1.65 0.40 1.5 0.40 1.5
R57/R57F 0.21 (0.45) 0.8 (1.7) 0.50 1.90 0.45 1.7 0.55 2.1 0.45 1.7 0.45 1.7
R67/R67F 0.29 (0.61) 1.1 (2.3) 0.69 (0.92) 2.6 (3.5) 0.74 2.8 0.84 3.2 0.48 1.8 0.53 2.0
R77/R77F 0.32 (0.79) 1.2 (3) 1.00 (1.08) 3.8 (4.1) 0.95 3.6 1.08 4.1 0.66 2.5 0.90 3.4
R87/R87F 0.61 (1.58) 2.3 (6) 1.77 (2.16) 6.7 (8.2) 1.90 7.2 2.03 7.7 1.66 6.3 1.72 6.5
R97 1.21 (2.59) 4.6 (9.8) 3.09 (3.70) 11.7 (14) 3.09 11.7 3.54 13.4 2.98 11.3 3.09 11.7
R107 1.58 (3.62) 6 (13.7) 4.30 16.3 4.46 16.9 5.07 19.2 3.48 13.2 4.20 15.9
R137 2.64 (6.60) 10 (25) 7.39 28.0 7.79 29.5 8.32 31.5 6.60 25.0 6.60 25.0
R147 4.07 (10.56) 15.4 (40) 12.28 46.5 12.67 48.0 13.73 52.0 10.43 39.5 10.82 41.0
R167 7.13 (18.48) 27 (70) 21.65 82.0 20.59 78.0 23.23 88.0 17.42 66.0 18.22 69.0
RF17 0.07 0.25 0.15 0.55 0.09 0.35 0.15 0.55 0.09 0.35 0.09 0.35
RF27 0.07 (0.11) 0.25 (0.4) 0.18 0.70 0.13 0.50 0.18 0.7 0.113 0.50 0.13 0.50
RF37 0.09 (0.25) 0.35 (0.95) 0.24 0.90 0.25 0.95 0.28 1.05 0.20 0.75 0.25 0.95
RF47 0.17 (0.40) 0.65 (1.5) 0.42 1.60 0.40 1.5 0.44 1.65 0.40 1.5 0.40 1.5
RF/RM57 0.21 (0.45) 0.8 (1.7) 0.48 1.80 0.45 1.7 0.53 2.0 0.45 1.7 0.45 1.7
RF/RM67 0.32 (0.66) 1.2 (2.5) 0.71 (0.95) 2.7 (3.6) 0.71 2.7 0.82 3.1 0.50 1.9 0.55 2.1
RF/RM77 0.32 (0.69) 1.2 (2.6) 1 (1.08) 3.8 (4.1) 0.87 3.3 1.08 4.1 0.63 2.4 0.79 3.0
RF/RM87 0.63 (1.58) 2.4 (6) 1.8 (2.09) 6.8 (7.9) 1.87 7.1 2.03 7.7 1.66 6.3 1.69 6.4
RF/RM97 1.35 (2.69) 5.1 (10.2) 3.14 (3.70) 11.9 (14) 2.96 11.2 3.70 14.0 2.96 11.2 3.12 11.8
RF/RM107 1.66 (3.93) 6.3( 14.9) 4.20 15.9 4.49 17.0 5.07 19.2 3.46 13.1 4.20 15.9
RF/RM137 2.51 (6.60) 9.5 (25) 7.13 27.0 7.66 29.0 8.58 32.5 6.60 25.0 6.60 25.0
RF/RM147 4.33 (11.09) 16.4 (42) 12.41 47.0 12.67 48.0 13.73 52.0 11.09 42.0 11.09 42.0
RF/RM167 6.86 (18.48) 26 (70) 21.65 82.0 20.59 78.0 23.23 88.0 17.16 65.0 18.74 71.0
1)
On compound gear units the primary (larger) gear unit is provided with the oil quantity in parenthesis.
2)
On compound gear units having mounting positions M3, M5, or M6 the secondary (smaller) gear unit is provided with the oil filling of the M1 flanged
mounting position.
Lubricants 78
Constant Speed Gear Reducers R/F/K/S Design and Operating Notes
FF..:
Fill Quantities
Gear Unit M1 M2 M3 M4 M5 M6
Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters
FF27 0.16 0.6 0.21 0.8 0.18 0.7 0.18 0.7 0.16 0.6 0.16 0.6
FF37 0.26 1 0.33 1.25 0.18 0.7 0.34 1.3 0.26 1 0.29 1.1
FF47 0.42 1.6 0.49 1.85 0.29 1.1 0.50 1.9 0.40 1.5 0.45 1.7
FF57 0.74 2.8 0.92 3.5 0.55 2.1 0.98 3.7 0.77 2.9 0.79 3
FF67 0.71 2.7 1.00 3.8 0.50 1.9 1.00 3.8 0.77 2.9 0.84 3.2
FF77 1.56 5.9 1.93 7.3 1.14 4.3 2.14 8.1 1.58 6 1.66 6.3
FF87 2.85 10.8 3.48 13.2 2.06 7.8 3.72 14.1 2.90 11 2.96 11.2
FF97 5.02 19 5.94 22.5 3.33 12.6 6.73 25.5 4.99 18.9 5.41 20.5
FF107 6.73 25.5 8.45 32 5.15 19.5 10.16 38.5 7.26 27.5 7.39 28
FF127 10.96 41.5 14.78 56 8.98 34 16.63 63 12.28 46.5 12.94 49
FF157 19.01 72 27.72 105 16.90 64 27.98 106 22.97 87 20.86 79
For compound drives the R reducer requires its own oil filling as shown
in the chart below.
Fill Quantities
Gear Unit M1/M3/M5/M6 M2 M4
Gallons Liters Gallons Liters Gallons Liters
R17 0.07 0.25 0.16 0.6 0.16 0.6
R37 0.11 0.4 0.24 0.9 0.29 1.1
R57 0.21 0.8 0.48 1.8 0.53 2.0
R77 0.32 1.2 1.00 3.8 1.08 4.1
R87 0.63 2.4 1.80 6.8 2.03 7.7
R97 1.35 5.1 3.14 11.9 3.70 14.0
79 Lubricants
Design and Operating Notes Constant Speed Gear Reducers R/F/K/S
KF..:
Fill Quantities
Gear Unit M1 M2 M3 M4 M5 M6
Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters
KF37 0.13 0.5 0.29 1.1 0.29 1.1 0.40 1.5 0.26 1 0.26 1
KF47 0.21 0.8 0.34 1.3 0.45 1.7 0.58 2.2 0.42 1.6 0.42 1.6
KF57 0.34 1.3 0.61 2.3 0.71 2.7 0.84 3.2 0.77 2.9 0.71 2.7
KF67 0.29 1.1 0.63 2.4 0.74 2.8 0.95 3.6 0.71 2.7 0.71 2.7
KF77 0.55 2.1 1.08 4.1 1.16 4.4 1.58 6 1.19 4.5 1.19 4.5
KF87 0.98 3.7 2.16 8.2 2.38 9 3.14 11.9 2.22 8.4 2.22 8.4
KF97 1.85 7 3.88 14.7 4.57 17.3 5.68 21.5 4.14 15.7 4.36 16.5
KF107 2.64 10 5.81 22 6.86 26 9.24 35 6.60 25 6.60 25
KF127 5.54 21 10.96 41.5 12.14 46 14.52 55 10.82 41 10.82 41
KF157 8.18 31 17.42 66 18.22 69 24.29 92 16.37 62 16.37 62
For compound drives the R reducer requires its own oil filling as shown
in the chart on page 79.
Lubricants 80
Constant Speed Gear Reducers R/F/K/S Design and Operating Notes
S..:
Fill Quantities
1)
Gear Unit M1 M2 M3 M4 M5 M6
Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters
S..37 0.07 0.25 0.11 0.4 0.13 0.5 0.15 0.55 0.11 0.4 0.11 0.4
S..47 0.09 0.35 0.21 0.8 0.18 (0.24) 0.7 (0.9) 0.26 1.0 0.21 0.8 0.21 0.8
S..57 0.13 0.5 0.32 1.2 0.26 (0.32) 1 (1.2) 0.38 1.45 0.34 1.3 0.34 1.3
S..67 0.26 1.0 0.53 2.0 0.58 (0.82) 2.2 (3.1) 0.82 3.1 0.69 2.6 0.69 2.6
S..77 0.50 1.9 1.11 4.2 0.98 (1.43) 3.7 (5.4) 1.56 5.9 1.16 4.4 1.16 4.4
S..87 0.87 3.3 2.14 8.1 1.82 (2.75) 6.9 (10.4) 2.98 11.3 2.22 8.4 2.22 8.4
S..97 1.80 6.8 3.96 15 3.54 (4.75) 13.4 (18) 5.76 21.8 4.49 17 4.49 17
SF..:
Fill Quantities
Gear Unit M1 M2 M31) M4 M52) M62)
Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters Gallons Liters
SF37 0.07 0.25 0.11 0.4 0.13 0.5 0.15 0.55 0.11 0.4 0.11 0.4
SF47 0.11 0.4 0.24 0.9 0.24 (0.29) 0.9 (1.1) 0.28 1.05 0.26 (0.24) 1.0 (0.9) 0.24 (0.26) 0.9 (1.0)
SF57 0.13 0.5 0.32 1.2 0.26 (0.40) 1 (1.5) 0.41 1.55 0.37 1.4 0.37 1.4
SF67 0.26 1.0 0.58 2.2 0.61 (0.79) 2.3 (3) 0.84 3.2 0.71 (0.69) 2.7 (2.6) 0.69 (0.71) 2.6 (2.7)
SF77 0.50 1.9 1.08 4.1 1.03 (1.53) 3.9 (5.8) 1.72 6.5 1.29 (1.21) 4.9 (4.6) 1.21 (1.24) 4.6 (4.7)
SF87 1.00 3.8 2.11 8.0 1.87 (2.67) 7.1 (10.1) 3.17 12.0 2.40 (2.16) 9.1 (8.2) 2.16 (2.40) 8.2 (9.1)
SF97 1.95 7.4 3.96 15.0 3.64 (4.96) 13.8 (18.8) 5.97 22.6 4.76 (4.49) 18.0 (17.0) 4.49 (4.76) 17.0 (18.0)
Note: For compound drives the R reducer requires its own oil filling as
shown in the chart on page 79.
81 Lubricants
Design and Operating Notes Constant Speed Gear Reducers R/F/K/S
Notes
Lubricants 82
Constant Speed Gear Reducers R/F/K/S Design and Operating Notes
8.2. Weights
R Series
83 Weights
Design and Operating Notes Constant Speed Gear Reducers R/F/K/S
R27 R37 R47 R47R37 R57
with: lbs with: lbs with: lbs with: lbs with: lbs
- 8 - 21 - 29 - 53 - 42
AD1 13 AD1 26 AD2 37 AD1 57 AD2 49
AD2 16 AD2 29 AD3 44 AD2 60 AD3 55
AM56 15 AM56 29 AM56 37 AM56 60 AM56 49
AM143 20 AM143 33 AM143 42 AM143 64 AM143 53
AM145 20 AM145 33 AM145 42 AM145 64 AM145 53
AQA80/1 17 AQA80/1 29 AM182 53 AQA80/1 62 AM182 64
AQA100/1 18 AQA100/1 31 AM184 51 AQA115/1 64 AM184 64
AQA115/1 19 AQA115/1 33 AM213/215 66 AQA100/1 64 AM213/215 79
AR71 18 AR71 31 AQA80/1 40 AR71 62 AQA80/1 51
AR80 24 AR80 35 AQA100/1 40 AR80 68 AQA100/1 53
AR90 24 AR90 35 AQA115/1 42 AR90 68 AQA115/1 53
Output +0 Output +3 AQA140/1 53 Output +0 AQA140/1 64
Flange Flange AQA190/1 71 Flange AQA190/1 84
AR71 40 AR71 53
AR80 46 AR80 57
AR90 46 AR90 57
AR112 57 AR100 71
AR100 60 AR112 71
Output +0 Output +7
Flange Flange
Weights 84
Constant Speed Gear Reducers R/F/K/S Design and Operating Notes
R97 R97R57 R107 R107R77 R137
with: lbs with: lbs with: lbs with: lbs with: lbs
- 209 - 276 - 331 - 430 - 507
AD3 230 AD2 275 AD3 365 AD2 440 AD4 560
AD4 245 AD3 285 AD4 375 AD3 450 AD5 600
AD5 285 AM56 275 AD5 410 AD4 465 AD6 620
AD6 310 AM143 285 AD6 440 AM56 440 AD7 640
AM182 245 AM145 285 AM182 375 AM143 440 AM213/215 560
AM184 245 AM182 300 AM184 375 AM145 440 AM254/256 610
AM213/215 255 AM184 300 AM213/215 375 AM182 450 AM284/286 610
AM254/256 300 AM213/215 310 AM254/256 420 AM184 450 AM324/326 640
AM284/286 300 AQA80/1 285 AM284/286 420 AM213/215 475 AM364/365 650
AM324/326 330 AQA100/1 285 AM324/326 450 AQA80/1 440 AQA190/1 570
AM364/365 340 AQA115/1 285 AM364/365 465 AQA100/1 440 AR132ML 600
AQA140/1 245 AQA140/1 300 AQA140/1 375 AQA115/1 440 AR132S/M 600
AQA190/1 265 AQA190/1 310 AQA190/1 385 AQA140/1 450 AR160 630
AR100 255 AR71 285 AR100 375 AQA190/1 475 AR180 630
AR112 255 AR80 285 AR112 375 AR71 440 Output +55
AR132ML 275 AR90 285 AR132ML 410 AR80 450 Flange
AR132S/M 275 AR100 300 AR132S/M 410 AR90 450
AR160 320 AR112 300 AR160 440 AR100 465
AR180 320 Output +36 AR180 440 AR112 465
Output Flange Output AR132ML 485
Flange +36 Flange +13
AR132S/M 485
Output +13
Flange
R137R77 R147 R147R77 R167
with: lbs with: lbs with: lbs with: lbs
- 617 - 783 - 915 - 1,323
AD2 630 AD4 850 AD2 930
R147R87
AD5 1,430
AD3 640 AD5 880 AD3 930 with: lbs AD6 1,480
AD4 650 AD6 900 AD4 950 - 948 AD7 1,460
AM56 630 AD7 900 AM56 930 AD2 960 AD8 1,500
AM143 640 AD8 950 AM143 930 AD3 970 AM254/256 1,430
AM145 640 AM254/256 890 AM145 930 AD4 990 AM284/286 1,430
AM182 650 AM284/286 890 AM182 940 AD5 1,030 AM324/326 1,480
AM184 650 AM324/326 930 AM184 940 AM145 970 AM364/365 1,500
AM213/215 660 AM364/365 940 AM213/215 950 AM182 980 AR160 1,460
AQA80/1 630 AQA190/1 870 AQA80/1 930 AM184 980 AR180 1,460
AQA100/1 640 AR132ML 880 AQA100/1 930 AM213/215 990 Output
AQA115/1 640 Flange +9
AR160 920 AQA115/1 930 AM254/256 1,040
AQA140/1 650 AR180 920 AQA140/1 940 AM284/286 1,040
AQA190/1 660 Output AQA190/1 960 AQA100/1 970
AR71 640 Flange +19
AR71 930 AQA115/1 970
AR80 640 AR80 930 AQA140/1 980
AR90 640 AR90 930 AQA190/1 1,000
AR100 650 AR100 950 AR90 970
AR112 650 AR112 950 AR100 990
AR132ML 670 AR132ML 960 AR112 990
AR132S/M 670 AR132S/M 970 AR132ML 1,010
Output +55 Output AR132S/M 1,010
Flange Flange +19
AR160 1,060 R167R107
R167R97 AR180 1,060
with: lbs
with: lbs Output +19
Flange - 1,720
- 1,632 AD3 1,760
AD3 1,650 AD4 1,760
AD4 1,680 AD5 1,810
AD5 1,700 AD6 1,830
AD6 1,740 AM182 1,760
AM182 1,680 AM184 1,760
AM184 1,680 AM213/215 1,760
AM213/215 1,680 AM254/256 1,810
AM254/256 1,720 AM284/286 1,810
AM284/286 1,720 AM324/326 1,850
AM324/326 1,760 AM364/365 1,850
AM364/365 1,760 AQA140/1 1,760
AQA140/1 1,680 AQA190/1 1,790
AQA190/1 1,680 AR100 1,760
AR100 1,680 AR112 1,760
AR112 1,680 AR132ML 1,810
AR132ML 1,700 AR132S/M 1,810
AR132S/M 1,700 AR160 1,830
AR160 1,740 AR180 1,830
AR180 1,740 Output
Flange +9
Output +9
Flange
85 Weights
Design and Operating Notes Constant Speed Gear Reducers R/F/K/S
F Series
Weights 86
Constant Speed Gear Reducers R/F/K/S Design and Operating Notes
87 Weights
Design and Operating Notes Constant Speed Gear Reducers R/F/K/S
K Series
Weights 88
Constant Speed Gear Reducers R/F/K/S Design and Operating Notes
89 Weights
Design and Operating Notes Constant Speed Gear Reducers R/F/K/S
K187R97 K187R107
with: lbs with: lbs
- 3,859 - 3,947
AD3 3,880 AD3 3,990
AD4 3,900 AD4 3,990
AD5 3,950 AD5 4,040
AD6 3,970 AD6 4,060
AM182 3,900 AM182 3,990
AM184 3,900 AM184 3,990
AM213/215 3,900 AM213/215 3,990
AM254/256 3,950 AM254/256 4,040
AM284/286 3,950 AM284/286 4,040
AM324/326 3,990 AM324/326 4,080
AM364/365 3,990 AM364/365 4,100
AQA140/1 3,900 AQA140/1 3,990
AQA190/1 3,900 AQA190/1 4,010
AR100 3,900 AR100 3,990
AR112 3,900 AR112 3,990
AR132ML 3,920 AR132ML 4,040
AR132S/M 3,920 AR132S/M 4,040
AR160 3,970 AR160 4,060
AR180 3,970 AR180 4,060
Output Flange - Output Flange -
Hollow Shaft -150 Hollow Shaft -150
Hollow Shaft - Hollow Shaft -
and Flange and Flange
Weights 90
Constant Speed Gear Reducers R/F/K/S Design and Operating Notes
S Series
91 Weights
Design and Operating Notes Constant Speed Gear Reducers R/F/K/S
Notes
Weights 92
Constant Speed Gear Reducers R/F/K/S Design and Operating Notes
Size
Gear units
27 37 47 57 67 77
KA, KH, KV - 643 425 8 643 428 2 643 431 2 643 431 2 643 434 7
SA, SH - 126 994 1 644 237 4 644 240 4 644 243 9 644 246 3
FA, FH, FV
013 348 5 013 348 5 013 348 5 013 348 5 013 348 5 013 349 3
Rubber buffers (2 pcs.)
Size
Gear units
87 97 107 127 157
KA, KH, KV 643 437 1 643 440 1 643 443 6 643 294 8 643 295 6
SA, SH 644 249 8 644 252 8 - - -
FA, FH, FV
013 349 3 013 350 7 013 350 7 013 351 5 013 347 7
Rubber buffers (2 pcs.)
VO
Key
UY
Output M
Shaft Tap
M EH Dust
Key
Cap
UF U
UY
VH
VG
FV
FO KEY
FY
FU
FM TAP
FU FV FO FY Key FM Tap
AD1 16 40 4 18 A5 x 5 x 32 M5 x 12.5
AD2 , AD2/ZR 19 40 4 21.5 A6 x 6 x 32 M6 x 16
AD3 , AD3/ZR 24 50 5 27 A8 x 7 x 40 M8 x 19
AD3 , AD3/ZR 28 60 5 31 A8 x 7 x 50 M10 x 22
AD4 , AD4/ZR 38 80 5 41 A10 x 8 x 70 M12 x 28
AD5 , AD5/ZR 42 110 10 45 A12 x 8 x 70 M16 x 36
AD6 , AD6/ZR 48 110 10 51.5 A14 x 9 x 80 M16 x 36
AD7 , AD7/ZR 55 110 10 59 A16 x 10 x 90 M20 x 42
AD8 , AD8/ZR 70 140 15 74.5 A20 x 12 x 110 M20 x 42
1)
Refer to page 101 for tolerance information
R Series F Series
K Series S Series
F Series
R Series
K Series S Series
Note: On foot-mounted gear units, check to ensure that the motor does
not project below the mounting surface.
1) 2)
Hollowshaft Bore Flange Centering Shoulder Customer Shaft
Diameter Solid Shaft U and FU U Dimension Tolerance AK Dimension Tolerance UA and UH Dimension Tolerance
mm Dimension Tolerance mm mm
mm mm
over to ISO k6 ISO m6 ISO H7 ISO j6 ISO h6 ISO h6
3 6 +.009 / +.001 — +0.12 / +0 +.006 / -.002 — +0 / -.008
6 10 +.010 / +.001 — +0.15 / +0 +.007 / -.002 — +0 / -.009
10 18 +.012 / +.001 — +0.18 / +0 +.008 / -.003 — +0 / -.011
18 30 +.015 / +.002 — +.021 / +0 +.009 / -.004 — +0 / -.013
30 50 +.018 / +.002 — +.025 / +0 +.011 / -.005 — +0 / -.016
50 80 — +.030 / +.011 +.030 / +0 +.012 / -.007 — +0 / -.019
80 120 — +.035 / +.013 +.035 / +0 +.013 / -.009 — +0 / -.022
120 180 — +.040 / +.015 +.040 / +0 +.014 / -.011 — +0 / -.025
180 250 — +.046 / +.017 +.046 / +0 +.016 / -.013 — +0 / -.029
250 315 — +.052 / +.020 +.052 / +0 — +0 / -.032 +0 / -.032
315 400 — +.057 / +.021 +.057 / +0 — +0 / -.036 +0 / -.036
400 500 — +.063 / +.023 +.063 / +0 — +0 / -.040 +0 / -.040
1)
Up to three different flange dimensions are available for each size of helical gear unit, Spiroplan® gear unit, and AC (brake) motor. The possible flanges per
size are indicated in the relevant dimension sheets.
2)
For use with shrink disc applications.
TorqLOC Tolerances
The table below lists the tolerances for the length of the hollowshaft in the gear unit.
Hollowshaft Tolerances
Model AM EA EH ES
FT 37-77 -0.078 / +0.039 —
-0.157 / +0.078 -0.078 / +0.039
KT, ST 37-77 — -0.078 / +0.039
FT 87-97 -0.098 / +0.039 —
-0.196 / +0.078 -0.098 / +0.039
KT, ST 87-97 — -0.098 / +0.039
Gear unit/motor type Screw-on lifting eyebolts/suspension eye lugs Cast-on suspension eye lugs
R/RF37-57, RX/RXF57-67 • -
R67 • -
F27-157 - •
K37-157 - •
K167-187 • -
S37-47 • -
S57-97 - •
Breather valves
The gear unit dimension drawings are always shown with screw plugs. The corresponding screw plug is replaced by an
activated breather valve at the factory depending on which mounting position M1 – M6 is ordered. This means the contour
dimensions may be slightly different.
Column can project beyond the foot Motor mounting platform can project Motor mounting platform can collide
mounting surface, depending on the beyond the foot mounting surface with the gear unit flange, depending
setting on the setting
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
C
RX57.. 6.85 AM56-145 ZE
GA1
BF1
Z 6.38
ø 6.30
Z
FY
FZ
AK1
BD1
*
AJ1
2.48
7.95
2.05
FU
*
Ø .750
.71
2.20 4.33 BB1 1.22 Ø .43
5.39 AA 4.92
6.14
1.57
1/4 - 20 x 0.63
.23 1.06 .19
Ø .750*
.83
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
RX57.. 6.85 AM182-365 ZE
GA1
BF1
ø 6.30 Z 6.38
Z
FY
FZ
1
BD1
AJ AK1 *
2.48
7.95
2.05
FU
*
Ø .750
.71
2.20 4.33 1.22 Ø .43
5.39 BB1 4.92
AA 6.14
1.57
1/4 - 20 x 0.63
.23 1.06 .19
Ø .750*
.83
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
ø 6.30
1.57 .39 Ø .35
.12
Z
FY
FZ
5.47
AK1
BD1
AJ1
2.05
Ø 3.74*
Ø.750*
Ø 5.51
.53
FU
L Ø4
2.44
BB1
6.38
AA
1.57 .39
.14 Ø .35
Ø .750*
Ø 4.33*
Ø 6.30
.12
Ø5
1.57 .47
.14 Ø .43
Ø 5.12*
Ø 7.87
Ø .750*
.50
Ø6
1.57
1/4 - 20 x 0.63
.23 1.06 .19
Ø .750*
.83
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
ø 6.30
1.57 .39 Ø .35
.12
Z
FY
FZ
5.47
1
AK1
BD1
AJ
2.05
Ø 3.74*
Ø.750*
Ø 5.51
.53
FU
L Ø4
2.44
BB1
6.38
AA
1.57 .39
.14 Ø .35
Ø .750*
Ø 4.33*
Ø 6.30
.12
Ø5
1.57 .47
.14 Ø .43
Ø 5.12*
Ø 7.87
Ø .750*
.50
Ø6
1.57
1/4 - 20 x 0.63
.23 1.06 .19
Ø .750*
.83
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
7.91 ZE
RX67.. GA1
AM56-145
BF1
ø 6.30
Z 6.93
Z
FY
FZ
AK1
BD1
3.15*
AJ1
8.90
2.36
Ø 1.000*
FU
L
.79
2.95 4.72 BB1 1.38 Ø .53
5.91 AA 5.31
6.69
1.97
3/8 - 16 X 0.87
.26 1.31 .25
Ø 1.000*
1.11
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
RX67.. 7.91 AM182-365 ZE
GA1
BF1
Z 6.93
ø 6.30
Z
FY
FZ
1
AK1
BD1
AJ
3.15*
8.90
2.36
Ø 1.000*
FU
L
.79
2.95 4.72 BB1 1.38 Ø .53
5.91 AA 5.31
6.69
1.97
3/8 - 16 X 0.87
.26 1.31 .25
Ø 1.000*
1.11
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 6.30
1.97 .39 Ø .35
.14
Z FY
FZ
5.79
1
AK1
BD1
AJ
2.76 2.36
Ø 4.33*
Ø 1.000*
Ø 6.30
.12
Ø5
FU
L
BB1
6.89
AA
1.97 .47
.14 Ø .43
Ø 1.000*
Ø 5.12*
Ø 7.87
.50
Ø6
1.97 .59
.16 Ø .53
Ø 1.000*
Ø 7.09*
Ø 9.84
.46
Ø8
1.97
3/8 - 16 X 0.87
.26 1.31 .25
Ø 1.000*
1.11
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 6.30
1.97 .39 Ø .35
.14
Z FY
FZ
5.79
1
AK1
BD1
AJ
2.76 2.36
Ø 4.33*
Ø 1.000*
Ø 6.30
.12
Ø5
FU
L
BB1
6.89
AA
1.97 .47
.14 Ø .43
Ø 1.000*
Ø 5.12*
Ø 7.87
.50
Ø6
1.97 .59
.16 Ø .53
Ø 1.000*
Ø 7.09*
Ø 9.84
.46
Ø8
1.97
3/8 - 16 X 0.87
.26 1.31 .25
Ø 1.000*
1.11
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
RX77.. C AM56-145
8.94
Z
BF1
GA1
Ø 7.87 8.27
Z FY
FZ
3.54*
BD1
AK1
AJ1
10.67
2.83
Ø 1.250*
FU
.98
L
1.36
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
C
RX77.. AM182-365
8.94
BF1
GA1
Z
8.27
ø 6.30
Z FY
FZ
1
3.54*
AK1
BD1
AJ
10.67
2.83
Ø 1.250*
FU
.98
L
1.36
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
C
RXF77.. AM56-145
8.94
BF1
GA1
Z
Ø 7.87
2.36 .47 Ø .43
.14
Z FY
FZ
7.13
BD1
AK1
AJ1
3.07 2.83
Ø 5.12*
Ø 1.250*
Ø 7.87
.50
FU
Ø6
L
BB1
8.27
AA
2.36 .59
.16 Ø .53
Ø 1.250*
Ø 7.09*
Ø 9.84
.46
Ø8
2.36
1/2 - 13 X 1.12
.26 1.69 .25
Ø 1.250*
1.36
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
C AM182-365
RXF77..
8.94
BF1
GA1
Z
Ø 7.87
2.36 .47 Ø .43
.14
Z FY
FZ
7.13
1
AK1
BD1
AJ 3.07 2.83
Ø 5.12*
Ø 1.250*
Ø 7.87
.50
FU
Ø6
L
BB1
8.27
AA
2.36 .59
.16 Ø .53
Ø 1.250*
Ø 7.09*
Ø 9.84
.46
Ø8
2.36
1/2 - 13 X 1.12
.26 1.69 .25
Ø 1.250*
1.36
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
RX87.. C AM56-145
10.59
BF1
GA1
Z
Ø 9.84
10.71
Z FY
FZ
BD1
AK1
AJ1
3.94*
13.07
Ø 1.625*
3.68
FU
L
1.18
4.33 6.30 BB1 2.36 Ø .69
8.11 AA 8.46
10.47
3.15
5/8 - 11 x 1.38
.38 2.25 .38
Ø 1.625*
1.79
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
C AM182-365
RX87..
10.59
BF1
GA1
Z
10.71
Ø 9.84
Z FY
FZ
1
AK1
AJ BD1
3.94*
13.07
Ø 1.625*
3.68
FU
L
1.18
4.33 6.30 BB1 2.36 Ø .69
8.11 AA 8.46
10.47
3.15
5/8 - 11 x 1.38
.38 2.25 .38
Ø 1.625*
1.79
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
C
RXF87.. AM56-145
10.59
BF1
GA1
Z
Ø 9.84
3.15 .73 Ø .53
.16
Z FY
FZ
9.13
BD1
AK1
AJ1
3.86 3.68
Ø 1.625*
Ø 7.09*
Ø 9.84
.46
FU
Ø8
L
BB1
10.71
AA
3.15 .73
.16 Ø .53
Ø 1.625*
Ø 11.81
Ø 9.06*
43
10.
Ø
3.15
5/8 - 11 x 1.38
.38 2.25 .38
Ø 1.625*
1.79
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
RXF87..
C AM182-365
10.59
BF1
Z
GA1
Ø 9.84
3.15 .73 Ø .53
.16
Z FY
FZ
9.13
AK1
1
BD1
AJ
Ø 1.625*
3.68
Ø 7.09*
Ø 9.84
.46
FU
Ø8
3.86
BB1
10.71
AA
3.15 .73
.16 Ø .53
Ø 1.625*
Ø 11.81
Ø 9.06*
43
10.
Ø
3.15
5/8 - 11 x 1.38
.38 2.25 .38
Ø 1.625*
1.79
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
RX97.. AM182-365
12.44
GA1
Ø 11.81
12.91
Z
AK1
BD1
1.38 4.41*
1
15.47
AJ
4.57
Ø 2.125*
BF1
Z
FY
FZ
FU
3.94
3/4 - 10 x 1.61
.64 2.63 .50
Ø 2.125*
2.35
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 11.81
3.94 .63 Ø .53
.16
Z
11.06
1
AK1
BD1
AJ
4.65 4.57
Ø 9.06*
Ø 2.125*
Ø 11.81
0.43
Ø1
BB1
12.91
AA
ZE
BF1
Z
FY
FZ
FU
L
3.94 .71
.20 Ø .69
Ø 2.125*
Ø 9.84*
Ø 13.78
1
1.8
Ø1
3.94
3/4 - 10 x 1.61
.64 2.63 .50
Ø 2.125*
2.35
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
RX107.. 14.33
AM182-365
GA1
Ø 13.78
14.57
Z
AK1
BD1
AJ
1.77 5.51*
18.07
5.12
Ø 2.375*
BF1
Z
FY
FZ
FU
L
4.72
3/4 - 10 x 1.61
.51 3.63 .63
Ø 2.375*
2.65
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 13.78
4.72 .71 Ø .69
.20
Z
12.56
AK1
BD1
1
AJ
5.31 5.12
Ø 9.84*
Ø 2.375*
Ø 13.78
1.81
Ø1
BB1
14.57
AA
ZE
BF1
Z
FY
FZ
FU
L
4.72 .87
.20 Ø .69
Ø 13.78*
Ø 2.375*
Ø 17.72
5
.7
15
Ø
4.72
3/4 - 10 x 1.61
.51 3.63 .63
Ø 2.375*
2.65
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
7.60
Z
GA1
Z FY
Ø 1.000*
FZ
Ø 4.72
AK1
BD1
1
5.79
AJ
.13
3.54*
FU
.71
L
1.97
3/8 - 16 x 0.87
.26 1.31 .25
Ø 1.000*
1.11
R27F..
7.83 ZC
1.97 .31
.12 Ø .26
Ø 1.000*
Ø 3.15*
Ø 4.72
Ø 3.94
3.19
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
RF27.. C
AM56-145
ZE
BF1
7.83
Z
1.97 .31 GA1
Ø 4.72
.12 Ø .26
Z FY
2.24
Ø 1.000*
Ø 3.15*
FZ
Ø 4.72
94
Ø 3.
AK1
BD1
1
AJ
.13
3.62
FU
L
BB1 5.59
AA
1.97 .35
.12 Ø .33
Ø 1.000*
Ø 3.74*
Ø 5.51
.53
Ø4
1.97 .39
.14 Ø .33
Ø 1.000*
Ø 4.33*
Ø 6.30
.12
Ø5
1.97
3/8 - 16 x 0.87
.26 1.31 .25
Ø 1.000*
1.11
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
6.34
Ø 4.72
Z FY
Ø 1.000*
FZ
BD1
AK1
5.94
1
AJ
.40
3.54*
.71
FU
L
1.97
3/8 - 16 x 0.87
.26 1.31 .25
Ø 1.000*
1.11
R37F..
8.15 ZC
1.97 .31
.12 Ø .26
Ø 1.000*
Ø 3.15*
Ø 4.72
.94
Ø3
3.19
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
RF37.. C AM56-145
8.15 ZE
BF1
1.97 .31 GA1
Z
Ø 4.72
.12 Ø .26
Z FY
2.40
Ø 1.000*
Ø 3.15*
Ø 4.72
FZ
Ø 3.94
AK1
BD1
1
AJ
.40
3.70
FU
FU
L
BB1 6.34
AA
1.97 .39
.14
Ø .35
Ø 1.000*
Ø 4.33*
Ø 6.30
.12
Ø5
1.97 .47
.14 Ø .43
Ø 1.000*
Ø 5.12*
Ø 7.87
50
Ø 6.
1.97
3/8 - 16 x 0.87
.26 1.31 .25
Ø 1.000*
1.11
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
7.01
Ø 6.30
Z FY
Ø 1.250*
FZ
AK1
BD1
AJ1
7.36
4.53*
.55
.94
FU
L
1/2 - 13 x 1.12
2.36
.26 1.69 .25
Ø 1.250*
1.36
R47F.. 9.25 ZC
2.36 .39
.12 Ø .35
Ø 1.250*
Ø 3.74*
Ø 5.51
3
4.5
Ø
3.54
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
C AM182-365
R47..
9.25
BF1
GA1
Z
7.01
Ø 6.30
Z FY
Ø 1.250*
FZ
AK1
BD1
1
7.36
AJ
4.53*
.55
.94
FU
L
1/2 - 13 x 1.12
2.36
.26 1.69 .25
Ø 1.250*
1.36
R47F.. 9.25 ZC
2.36 .39 ZC
Ø .35
.12 Y
Y
Ø 1.250*
3
Ø 3.74*
Ø 5.51
4.5
Ø
3.54
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
2.36 .39 Z
GA1
Ø 6.30
.12 Ø .35
Z FY
2.83
Ø 1.250*
Ø 3.74*
Ø 5.51
FZ
.5 3
BD1
AK1
AJ1 Ø4
.55
4.65
FU
L
BB1 7.01
AA
2.36 .39
.14 Ø .35
Ø 1.250*
Ø 4.33*
Ø 6.30
.12
Ø5
2.36 .47
.14 Ø .43
Ø 1.250*
Ø 5.12*
Ø 7.87
.50
Ø6
2.36
3/8 - 16 x 0.87
.26 1.69 .25
Ø 1.250*
1.36
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ZE
RF47.. C AM182-365
9.25
BF1
2.36 .39 Z
GA1
ø 6.30
.12 Ø .35
Z FY
2.83
Ø 1.250*
Ø 3.74*
Ø 5.51
FZ
.53
AK1
BD1
AJ
1 Ø4
.55
4.65
FU
L
7.01
BB1
AA
2.36 .39
.14 Ø .35
Ø 1.250*
Ø 4.33*
Ø 6.30
.12
Ø5
2.36 .47
.14 Ø .43
Ø 1.250*
Ø 5.12*
Ø 7.87
.50
Ø6
2.36
3/8 - 16 x 0.87
.26 1.69 .25
Ø 1.250*
1.36
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
Ø 6.30
7.95
Z FY
Ø 1.375*
FZ
1
AK1
BD1
AJ
7.36
.44
4.53*
.94
FU
L
2.36 2.16 Ø .53
3.94 BB1
6.50 5.31
7.87 AA 7.48
1.51
R57F.. 10.12 ZC
2.76 .39
.14 Ø .35
Ø 1.375*
Ø 4.33*
Ø 6.30
2
Ø 5.1
3.94
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
GA1
ø 6.30
7.95
Z FY
Ø 1.375*
FZ
AK1
BD1
1
7.36
AJ
.44
4.53*
.94
FU
L
2.36 2.16 Ø .53
BB1
3.94 6.50 5.31
AA
7.87 7.48
1.51
R57F.. 10.12 ZC ZC
2.76 .39
Y Ø .35
.14
Y
Ø 1.375*
Ø 4.33*
2
Ø 5.1
Ø 6.30
3.94
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
2.76 .39 Z
GA1
Ø 6.30
.14 Ø .35
Z FY
2.83
Ø 1.375*
Ø 4.33*
Ø 6.30
FZ
.12
Ø5
AK1
BD1
1
AJ
.44
4.76
FU
L
7.95
BB1
AA
Ø 1.375*
Ø 7.09*
Ø 1.375*
Ø 5.12*
Ø 9.84
Ø 7.87
.50 .46
Ø6 Ø 8
2.76
1/2 - 13 x 1.12
.43 1.81 .31
Ø 1.375*
1.51
16.54 ZC
RM57..
9.06 .59
.16 Ø .53
2.83
Ø 7.09*
Ø 9.84
Ø 5.31
6
Ø 8.4
Ø
4.76
.44
7.95
2.76
.20 2.36 .39
1.50
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
2.76 .39
Z
GA1
ø 6.30
.14 Ø .35
Z FY
2.83
Ø 1.375*
Ø 4.33*
Ø 6.30
FZ
.12
Ø5
AK1
BD1
1
AJ
.44
4.76
FU
L
7.95
BB1
AA
Ø 1.375*
Ø 7.09*
Ø 1.375*
Ø 5.12*
Ø 9.84
Ø 7.87
.50 .46
Ø6 Ø 8
2.76
1/2 - 13 x 1.12
.43 1.81 .31
Ø 1.375*
1.51
16.54
RM57.. ZC
9.06 .59 ZC
.16 Ø .53
Y
Y
2.83
Ø 7.09*
Ø 9.84
Ø 5.31
6
Ø 8.4
Ø
4.76
.44
7.95
2.76
.20 2.36 .39
1.50
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
Ø 6.30
8.47
Z FY
Ø 1.375*
FZ
BD1
AK1
AJ1
8.35
.81
5.12*
1.18
FU
L
2.36 2.36 Ø .55
BB1
3.94 7.68 5.91
AA
9.25 8.27
2.76
1/2 - 13 x 1.12
.43 1.81 .31
Ø 1.375*
1.51
R67F.. 11.02 ZC
2.76 .47
.14 Ø .43
Ø 1.375*
Ø 5.12*
Ø 7.87
.50
Ø6
3.94
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
8.47
ø 6.30
Z FY
Ø 1.375*
FZ
AK1
BD1
1
8.35
AJ
.81
5.12*
1.18
FU
L
2.36 2.36 Ø .55
BB1
3.94 7.68 5.91
AA
9.25 8.27
2.76
1/2 - 13 x 1.12
.43 1.81 .31
Ø 1.375*
1.51
R67F.. 11.02 ZC
2.76 .47 ZC
.14 Y Ø .43
Y
Ø 1.375*
Ø 5.12*
.50
Ø 7.87
Ø6
3.94
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
2.76 .47 Z
GA1
Ø 6.30
.14 Ø .43
Z FY
Ø 1.375*
3.23
Ø 5.12*
Ø 7.87
FZ
0
6.5
AK1
BD1
AJ1 Ø
.81
5.28
FU
L
8.47
BB1
AA
2.76 .59
.16 Ø .53
Ø 1.375*
Ø 7.09*
Ø 9.84
.4 7
Ø8
2.76
1/2 - 13 x 1.12
.43 1.81 .31
Ø 1.375*
1.51
18.07 ZC
RM67..
9.45 .63
.16 Ø .53
3.23
Ø 11.81
Ø 9.06*
Ø 40 k6
Ø 4.49
3
0.4
Ø1
.81
5.28
8.47
3.15
.20 2.76 .47
Ø40 k6
1.69
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
2.76 .47 GA1
Z
ø 6.30
.14 Ø .43
Z FY
Ø 1.375*
3.23
Ø 5.12*
Ø 7.87
FZ
0
6.5
AK1
BD1
1
AJ Ø
.81
5.28
FU
L
8.47
BB1
AA
2.76 .59
.16 Ø .53
Ø 1.375*
Ø 7.09*
Ø 9.84
.4 7
Ø8
2.76
1/2 - 13 x 1.12
.43 1.81 .31
Ø 1.375*
1.51
18.07 ZC
RM67.. ZC
9.45 .63
.16 Y Ø .53
Y
3.23
Ø 11.81
Ø 9.06*
Ø 40 k6
Ø 4.49
3
0.4
Ø1
.81
5.28
8.47
3.15
.20 2.76 .47
Ø40 k6
1.69
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
GA1
Ø 7.87
9.25
Z FY
Ø 1.625*
FZ
BD1
AK1
AJ1
8.98
.63
5.51*
1.18
FU
L
3.15
5/8 - 11 x 1.38
.38 2.25 .38
Ø 1.625*
1.79
11.81
R77F.. ZC
3.15 .59
.16 Ø .53
Ø 1.625*
Ø 7.09*
Ø 9.84
7
8.4
Ø
4.53
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
9.25
Ø 7.87
Z FY
Ø 1.625*
FZ
AK1
BD1
1
AJ
8.98
.63
5.51*
1.18
FU
L
2.36 2.36 Ø .69
BB1
4.53 8.07 6.69
AA
9.65 9.06
3.15
5/8 - 11 x 1.38
.38 2.25 .38
Ø 1.625*
1.79
11.81
R77F.. ZC
3.15 .59 ZC
Y Ø .53
.16
Y
Ø 1.625*
Ø 7.09*
7
Ø 9.84
8.4
Ø
4.53
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
3.15 .59
Z
GA1
Ø 7.87
.16 Ø .53
Z FY
Ø 1.625*
3.46
Ø 7.09*
Ø 9.84
FZ
.47
Ø8
AK1
BD1
AJ1
.63
5.67
FU
L
9.25
BB1
AA
3.15 .73
.16 Ø .53
Ø 11.81
Ø 9.06*
Ø 1.625*
0.4 3
Ø1
3.15
5/8 - 11 x 1.38
.38 2.25 .38
Ø 1.625*
1.79
20.75 ZC
RM77..
11.81 .71
.20 Ø .69
Ø 9.84*
3.46
Ø 13.78
Ø 6.69
Ø 50 k6
81
11.
Ø
.63
5.67
9.25
3.94
.39 3.15 .55
Ø 50 k6
2.11
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
3.15 .59 Z
GA1
Ø 7.87
.16 Ø .53
Z FY
Ø 1.625*
3.46
Ø 7.09*
Ø 9.84
FZ
.47
AK1
BD1
AJ
1 Ø8
.63
5.67
FU
L
9.25
BB1
AA
3.15 .73
.16 Ø .53
Ø 11.81
Ø 9.06*
Ø 1.625*
0.43
Ø1
3.15
5/8 - 11 x 1.38
.38 2.25 .38
Ø 1.625*
1.79
20.75 ZC
RM77..
11.81 .71 ZC
.20 Y Ø .69
Y
Ø 9.84*
3.46
Ø 13.78
Ø 6.69
Ø 50 k6
81
11.
Ø
.63
5.67
9.25
3.94
.39 3.15 .55
Ø 50 k6
2.11
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
11.69
Ø 9.84
Z FY
Ø 2.125*
FZ
AK1
BD1
11.61
AJ1
.50
7.09*
1.77
FU
L
3.94
3/4 - 10 x 1.61
.64 2.63 .50
Ø 2.125*
2.35
R87F.. 14.65 ZC
3.94 .63
.16 Ø .53
Ø 2.125*
Ø 11.81
Ø 9.06*
43
10.
Ø
5.51
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
11.69
Ø 9.84
Z FY
Ø 2.125*
FZ
AK1
BD1
11.61
1
AJ
.50
7.09*
1.77
FU
L
3.94
3/4 - 10 x 1.61
.64 2.63 .50
Ø 2.125*
2.35
R87F.. 14.65 ZC
3.94 .63 ZC
Ø .53
.16 Y
Y
43
Ø 2.125*
Ø 11.81
Ø 9.06*
10.
Ø
5.51
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
3.94 .63 Z
GA1
Ø 9.84
.16 Ø .53
Z FY
Ø 2.125*
4.53
Ø 11.81
Ø 9.06*
FZ
3
0.4
AK1
BD1
AJ1 Ø1
.50
7.24
FU
L
11.69
BB1
AA
3.94 .71
.20 Ø .69
Ø 2.125*
Ø 9.84*
Ø 13.78
1
1.8
Ø1
3.94
3/4 - 10 x 1.61
.64 2.63 .63
Ø 2.125*
2.35
RM87.. 25.16 ZC
14.17 .71
.20 Ø .69
Ø 13.78
4.53
Ø 9.84*
Ø 7.32
1
1.8
Ø1
.50
7.24
11.69
4.72
.20 4.33 .71
2.52
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
3.94 .63 Z
GA1
.16 Ø .53
Ø 9.84
Z FY
Ø 2.125*
4.53
Ø 11.81
Ø 9.06*
FZ
3
0.4
AK1
BD1
AJ
1 Ø1
.50
7.24
FU
L
11.69
BB1
.71 AA
3.94
.20 Ø .69
Ø 2.125*
Ø 9.84*
Ø 13.78
1
1.8
Ø1
3.94
3/4 - 10 x 1.61
.64 2.63 .63
Ø 2.125*
2.35
RM87.. 25.16 ZC
14.17 .71 ZC
.20 Y Ø .69
Y
Ø 13.78
4.53
Ø 9.84*
Ø 7.32
1
1.8
Ø1
.50
7.24
11.69
4.72
.20 4.33 .71
2.52
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
R97.. AM182-365
17.32
GA1
Ø 11.81
13.70
Ø 2.375* Z
AK1
BD1
1
14.49
AJ
.40
8.86*
2.17
3.94
BB1 3.54 Ø .87
6.30 12.20 9.84
AA
14.37 13.39
ZE
BF1
Z
FY
FZ
FU
4.72 L
3/4 - 10 x 1.61
.51 3.63 .63
Ø 2.375*
2.65
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 11.81
.20 Ø .69
Z
5.67
Ø 2.375*
Ø 9.84*
Ø 13.78
1
1.8
AK1
BD1
1
AJ Ø1
.40
9.06
13.70
BB1
AA
4.72 .87
ZE
.20 Ø .69
BF1
Z
Ø 13.78*
Ø 2.375*
Ø 17.72
FY
5
.7
15
Ø
FZ
FU
L
4.72
3/4 - 10 x 1.61
.51 3.63 .63
Ø 2.375*
2.65
29.33 ZC
RM97..
16.54 .87 ZC
.20 Y Ø .69
Y
Ø 13.78*
5.67
Ø 17.72
Ø 70 m6
Ø 8.43
5
.7
15
.40
Ø
9.06
13.70
5.51
.30 4.92 .79
2.93
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
R107.. AM182-365
19.49
GA1
Ø 13.78
16.10
Ø 2.875*
Z
AK1
BD1
1
16.06
AJ
9.84*
.80
2.56
4.92 4.33
BB1 Ø 1.02
7.28 14.57
11.41
AA
17.32
15.75
ZE
BF1
Z
FY
FZ
FU
L
5.51
3/4 - 10 x 1.61
.67 4.13 .75
Ø 2.875*
3.20
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 13.78
.20 Ø .69
Z
Ø 2.875*
6.22
Ø 9.84*
Ø 13.78
.81
Ø 11
AK1
BD1
1
AJ
.80
10.04
16.10
BB1
AA
ZE
5.51 .87
BF1
Z
.20 Ø .69
FY
Ø 13.78*
Ø 2.875*
Ø 17.72
FZ
.75
15
Ø
FU
L
5.51
3/4 - 10 x 1.61
.67 4.13 .75
Ø 2.875*
3.20
34.02 ZC
RM107.. 19.69 .98 ZC
.20 Y Ø .69
Y
6.22
Ø 17.72*
Ø 21.65
Ø 9.13
.69
19
Ø
.80
10.04
16.10
6.69
.79 4.92 .87
3.35
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
R137.. 23.19
AM182-365
GA1
Ø 15.75
18.03
Ø 3.625*
Z
AK1
BD1
19.49
1
AJ
12.40*
.99
2.76
5.12 4.33 Ø 1.30
BB1
8.66 16.14 13.39
AA
19.29 17.72
ZE
BF1
Z
FY
FZ
FU
L
6.69
1 - 8 x 2.13
.63 5.38 .88
Ø 3.625*
4.01
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 15.75
.20 Ø .69
Z
Ø 13.78*
7.09
Ø 3.625*
Ø 17.72
5
.7
AK1
BD1
AJ
1 15
Ø
.99
12.60
18.03
BB1
AA
ZE
6.69 .98
.20 Ø .69
BF1
Z
Ø 17.72*
Ø 3.625*
Ø 21.65
FY
.69
19
Ø
FZ
FU
L
6.69
1 - 8 x 2.13
.63 5.38 .88
Ø 3.625*
4.01
40.31 ZC
RM137..
23.62 .98 ZC
.20 Ø .69
Y
Y
Ø 17.72*
7.09
Ø 21.65
.69
9.96
19
Ø
.99
12.60
18.03
8.27
.59 7.09 1.10
4.17
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
R147.. 27.36 AM182-365
GA1
Ø 17.72
21.26
Z
Ø 4.375*
AK1
BD1
22.24
1
AJ
1.31
13.98*
3.15
5.91 5.91 Ø 1.54
BB1
10.24 19.69 14.96
AA
23.23 20.87
ZE
BF1
Z
FY
FZ
FU
L
8.27
1 - 8 x 2.13
1.09 6.00 1.00
Ø 4.375*
4.82
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 17.72
.20 Ø .69
Z
8.27
Ø 13.78*
Ø 4.375*
Ø 17.72
5
.7
AK1
BD1
AJ
1 15
Ø
1.31
14.21
21.26
BB1
AA
ZE
8.27 .98
BF1
.20 Ø .69
Z
FY
Ø 17.72*
Ø 4.375*
Ø 21.65
.69
FZ
19
Ø
FU
L
8.27
1 - 8 x 2.13
1.09 6.00 1.00
Ø 4.375*
4.82
45.43 ZC
RM147.. 25.98 1.10 ZC
.24 Y Ø .87
Y
8.27
Ø 21.65*
Ø 25.98
Ø 10.79
.62
23
Ø
1.31
14.21
21.26
8.27
.59 7.09 1.10
4.57
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
R167.. 31.10
AM182-365
GA1
Ø 21.65
26.38
Ø 4.750* Z
AK1
BD1
26.58
1
AJ
16.73*
2.36
3.94
6.30 6.30 Ø 1.54
BB1
10.63 22.84 19.69
AA
26.38 25.98
ZE
BF1
Z
FY
FZ
FU
8.27 L
1 - 8 x 2.13
.82 6.56 1.25
Ø 4.750*
5.29
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 21.65
.20 Ø .69
Z
Ø 4.750*
Ø 17.72*
9.84
Ø 21.65
9
.6
AK1
BD1
1 19
AJ Ø
16.93
2.36
23.38
BB1
AA
8.27 1.10
.24 Ø .87
ZE
Ø 21.65*
BF1
Ø 4.750*
Ø 25.98
Z
.62
23
Ø
FY
FZ
8.27
FU
1 - 8 x 2.13
.82 6.56 1.25 L
Ø 4.750*
5.29
RM167.. 51.69 ZC
28.74 1.10 ZC
Ø .87
.24 Y
Y
Ø 21.65*
9.84
Ø 25.98
Ø 11.41
.62
23
Ø
16.93
2.36
23.38
8.27
.20 7.87 1.26
5.28
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
<=AM200 ZC
PC
Y FY
FZ
AK1
BD1
1
AJ
FU
L
BB1
>=AM225 Z
BF1
ZC
PC
Z FY
AJ1
FZ
AK1
BD1
FU
L
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
<=AM200 ZC
PC
Y FY
FZ
AK1
BD1
1
AJ
FU
L
BB1
>=AM225 Z
BF1
ZC
PC
Z FY
AJ1
FZ
AK1
BD1
FU
L
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
FZ
AJ1
BD2
AK1
PC
FU
FU
BD2
ZE
Z
AJ1
BD2
AK1
PC
FU
FU
BD2 ZE
L
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
FZ
AJ1
BD2
AK1
PC
FU
FU
BD2
ZE
Z
AJ1
BD2
AK1
PC
FU
FU
BD2 ZE
L
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
FZ
AJ1
BD2
AK1
PC
FU
FU
BD2
ZE
Z
AJ1
BD2
AK1
PC
FU
FU
BD2 ZE
L
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
Z LA
BF1 ZC
WB
FY
FU
FZ
BD1
AK1
AJ1
PC
FU
ZE
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
Z LA
BF1 ZC
WB
FY
FU
FZ
BD1
AK1
AJ1
PC
FU
ZE
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
R.. AD.. CC
FU
PC
FV
FP FO FZ
FY
FU
CC
AM FM TAP
R.. AD../ZR
AN
MA TAP
AL*
FU
AE
PC
BF
GC
VD
AL GC AE AN PC CC VD AM BF MA FU FV FO FP FY FZ FM TAP
TAP
R..27 AD1 - - - - 4.02 - - - - 0.625 0.70
R..37 4.72 1.57 0.25 1.26 0.1875 1/4 - 20 x 0.63
AD2 , AD2/ZR 2.17 0.53 3.15 0.31 5.12 0.47 1.97 0.35 M8 0.750 0.83
R..47 AD2 , AD2/ZR 2.17 0.53 3.15 4.84 0.47 1.97 0.35 M8 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
R..57 0.31 6.30 0.1875
R..67 AD3 , AD3/ZR 2.76 0.61 4.13 6.26 0.63 2.36 0.43 M10 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
AD2 , AD2/ZR 2.17 0.53 3.15 4.57 0.47 1.97 0.35 M8 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
0.31 0.1875
R..77 AD3 , AD3/ZR 2.76 0.61 4.13 7.87 5.94 0.63 2.36 0.43 M10 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.82 0.79 3.76 0.53 M12 1.375 3.14 0.35 2.76 1.51 0.3125 1/2 - 13 x 1.12
AD2 , AD2/ZR 2.17 0.53 3.15 4.37 0.47 1.97 0.35 M8 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
0.31
AD3 , AD3/ZR 2.76 0.61 4.13 6.14 0.63 2.36 0.43 M10 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
R..87 9.84
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.62 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 0.43 11.50 4.96 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
AD3 , AD3/ZR 2.76 0.61 4.13 5.94 0.63 2.36 0.43 M10 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
0.31
AD4 , AD4/ZR 3.94 0.63 5.12 8.43 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
R..97 11.81 0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 11.30 4.96 1.625 0.58 1.79 0.375
0.43 4.33 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 12.87 1.02 5.14 0.69 M16 1.875 0.64 3.15 2.09 0.50
AD3 , AD3/ZR 2.76 0.61 4.13 0.31 5.71 0.63 2.36 0.43 M10 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.19 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
R..107 13.78 0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 11.06 4.96 1.625 0.58 1.79 0.375
0.43 4.33 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 12.64 1.02 5.14 0.69 M16 1.875 0.64 3.15 2.09 0.50
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 7.91 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 10.79 4.96 1.625 0.58 1.79 0.375
R..137 0.43 15.75 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 12.36 1.02 5.14 0.69 M16 1.875 4.33 3.15 2.09
0.64 0.50
AD7 , AD7/ZR 4.92 0.75 7.48 0.51 12.13 1.18 5.24 0.87 M20 2.125 3.54 2.35 3/4 - 10 x 1.61
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 7.60 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 10.47 4.96 1.625 0.58 1.79 0.375
0.43 5/8 - 11 x 1.38
R..147 AD6 , AD6/ZR 5.12 0.89 7.87 17.72 12.05 1.02 5.14 0.69 M16 1.875 4.33 3.15 2.09
0.64 0.50
AD7 , AD7/ZR 4.92 0.75 7.48 0.51 11.81 1.18 5.24 0.87 M20 2.125 3.54 2.35
3/4 - 10 x 1.61
AD8 , AD8/ZR 4.72 0.89 8.27 0.20 15.08 0.77 6.10 0.53 M12 2.750 5.51 0.90 4.33 3.03 0.625
AD5 , AD5/ZR 4.72 0.94 7.09 10.16 0.79 4.96 0.53 M12 1.625 0.58 2.76 1.79 0.375
0.43 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 11.73 1.02 5.14 0.69 M16 1.875 4.33 3.15 2.09
R..167 21.65 0.64 0.50
AD7 , AD7/ZR 4.92 0.75 7.48 0.51 11.50 1.18 5.24 0.87 M20 2.125 3.54 2.35
3/4 - 10 x 1.61
AD8 , AD8/ZR 4.72 0.89 8.27 0.20 14.72 0.77 6.10 0.53 M12 2.750 5.51 0.90 4.33 3.03 0.625
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
270˚ FV
AF VK QD
FV
max
DH FP FO FZ
DH min
FY
FU
FU
PC
0˚
DB
180˚
> D + DB
D
FM TAP
DG
AF
2
DM min
max
CC
0˚ 180˚
DH DH DM DM
VK AF PC DG CC QD FU FV FO FP FY FZ FM TAP
min max min max
DT71D
AD2/P DT80.. 7.68 7.09 2.56 6.50 4.53 6.50 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
RX..57 DT90.. 6.30 4.33 0.1875
1), 2)
DV100..
AD3/P 9.06 9.45 3.15 6.89 4.72 6.89 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..1), 2)
DT71D
AD2/P DT80.. 7.68 7.09 2.56 6.50 4.92 6.50 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
RX..67 DT90.. 6.30 4.33 0.1875
1)
DV100..
AD3/P 9.06 9.45 3.15 6.89 5.12 6.89 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..1)
DT71D
AD2/P DT80.. 7.68 7.09 2.56 5.12 6.50 5.51 7.87 4.57 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
DT90.. 0.1875
RX..77 7.87
DV100..
AD3/P 9.06 9.45 3.15 5.31 6.89 5.71 6.89 5.94 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..
1), 2)
AD4/P DV132.. 13.58 11.46 4.49 5.71 8.27 6.30 8.27 8.82 3.11 1.375 3.14 0.35 2.76 1.51 0.3125 1/2 - 13 x 1.12
DT71D
AD2/P DT80.. 7.68 7.09 2.56 6.30 7.87 6.69 7.87 4.37 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
DT90..
DV100..
RX..87 AD3/P 9.06 9.45 9.84 3.54 6.50 9.06 6.89 9.06 6.14 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112..
AD4/P DV132.. 13.58 11.46 4.49 6.69 8.27 7.68 11.02 8.62 3.11 1.375 3.14 0.35 2.76 1.51 0.3125 1/2 - 13 x 1.12
1), 2)
DV160..
AD5/P 16.93 13.98 6.02 6.89 9.84 7.87 9.84 11.50 4.45 1.625 4.33 0.58 2.76 1.79 0.375 5/8 - 11 x 1.38
DV180..1), 2)
DT90..
AD3/P DV100.. 9.06 9.45 3.54 7.28 9.06 8.07 12.60 5.94 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112..
RX..97 11.81
AD4/P DV132.. 13.58 11.46 4.49 11.02 8.66 11.02 8.43 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
DV160.. 7.68 2.76
AD5/P 16.93 13.98 6.02 9.84 8.86 12.80 11.30 4.45 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
DV180..
DV100..
AD3/P 9.06 9.45 3.54 8.27 12.60 8.86 12.60 5.71 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112..
AD4/P DV132.. 13.58 11.46 4.49 11.02 10.63 14.17 8.19 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
8.66
RX..107 DV160.. 13.78 2.76
AD5/P 16.93 13.98 6.02 12.80 10.83 12.80 11.06 4.45 1.625 0.58 1.79 0.375
DV180.. 8.66
4.33 5/8 - 11 x 1.38
DV200..
AD6/P 19.49 17.99 6.42 9.65 12.20 9.84 12.20 12.64 4.49 1.875 0.64 3.15 2.09 0.50
DV225..
1)
Column can project beyond the foot mounting surface, depending on the setting.
2)
Motor mounting platform can project beyond the foot mounting surface.
3)
Motor mounting platform can collide with the gear unit flange, depending on the setting.
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
AF VK QD
FV
max
FP FO FZ
DH
DH min
FY
FU
FU
PC
0˚
DB
180˚
> D - DB
D
FM TAP
DM min
max DG
___
AF
2
CC
0˚ 180˚
VK AF PC DG DH DH DM DM CC QD FU FV FO FP FY FZ FM TAP
min max min max
1), 2)
DT71D
1), 2)
R..27 AD2/P DT80.. 7.68 7.09 4.72 2.56 3.94 6.50 4.72 6.50 5.12 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
1), 2)
DT90..
DT71D1), 2)
1), 2)
R..37 AD2/P DT80.. 7.68 7.09 4.72 2.56 4.33 6.50 4.72 6.50 5.12 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
1), 2)
DT90..
DT71D
AD2/P DT80.. 7.68 7.09 2.56 4.92 6.50 5.31 6.50 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
R..47 DT90.. 6.30 0.1875
1), 2)
DV100..
AD3/P 9.06 9.45 3.15 5.12 6.89 5.51 6.89 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..1), 2)
DT71D
AD2/P DT80.. 7.68 7.09 2.56 4.92 6.50 5.71 7.87 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
R..57 DT90.. 6.30 0.1875
1), 2)
DV100..
AD3/P 9.06 9.45 3.15 5.12 6.89 6.10 9.06 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..1), 2)
DT71D
AD2/P DT80.. 7.68 7.09 2.56 4.92 6.50 6.10 7.87 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
R..67 DT90.. 6.30 0.1875
1), 2)
DV100..
AD3/P 1), 2) 9.06 9.45 3.15 5.12 6.89 6.30 9.06 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..
DT71D1)
1)
AD2/P DT80.. 7.68 7.09 2.56 5.31 7.87 6.50 7.87 4.57 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
1)
DT90.. 0.1875
R..77 7.87
DV100..
AD3/P 9.06 9.45 3.15 5.71 6.89 6.69 9.06 5.94 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..
1), 2)
AD4/P DV132.. 13.58 11.46 4.49 5.91 8.27 6.89 8.27 8.82 3.11 1.375 3.14 0.35 2.76 1.51 0.3125 1/2 - 13 x 1.12
DT71D
AD2/P DT80.. 7.68 7.09 2.56 6.10 7.87 7.68 10.24 4.37 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
DT90..
DV100..
R..87 AD3/P 9.06 9.45 9.84 3.54 9.06 7.28 9.06 6.14 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112..
6.50
AD4/P DV132.. 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
13.58 11.46 4.49 8.27 8.07 11.02 8.62 3.11
DV160.. 2.76
AD5/P 1), 2) 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
DV180.. 16.93 13.98 6.02 8.27 9.84 8.46 9.84 11.50 4.45
1)
Column can project beyond the foot mounting surface, depending on the setting.
2)
Motor mounting platform can project beyond the foot mounting surface.
3)
Motor mounting platform can collide with the gear unit flange, depending on the setting.
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
270˚ FV
AF VK QD
max FV
FP FO FZ
DH
DH min
FY
FU
FU
PC
0˚
180˚
> DH min
FM TAP
DM min
max DG
CC
RF..
RM..
VK AF PC DG DH DH DM DM CC QD FU FV FO FP FY FZ FM TAP
min max min max
DT90..
0.32
AD3/P DV100.. 9.06 9.45 3.54 7.09 9.06 9.25 12.60 5.94 2.52 1.125 2.36 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112.. 0.32
R..97 11.81
AD4/P DV132.. 13.58 11.46 4.49 11.02 9.45 11.02 8.43 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
DV160.. 7.48 2.76
AD5/P 16.93 13.98 6.02 9.84 9.65 12.80 11.30 4.45 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
DV180..
DV100..
AD3/P 9.06 9.45 3.54 12.60 9.06 12.60 5.71 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112.. 9.06
AD4/P DV132.. 13.58 11.46 4.49 11.02 10.43 14.17 8.19 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
1)
R..107 DV160.. 13.78 2.76
AD5/P 16.93 13.98 6.02 8.86 12.80 10.63 12.80 11.06 4.45 1.625 0.58 1.79 0.375
DV180..1)
4.33 5/8 - 11 x 1.38
DV200..
AD6/P 19.49 17.99 6.42 9.65 12.20 9.84 12.20 12.64 4.49 1.875 0.64 3.15 2.09 0.50
DV225..
AD4/P DV132.. 13.58 11.46 4.49 11.02 11.02 14.17 7.91 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
1)
DV160.. 9.65 2.76
AD5/P 16.93 13.98 6.02 12.80 11.22 12.80 10.79 4.45 1.625 0.58 1.79 0.375
R..137 DV180..1) 15.75
4.33 5/8 - 11 x 1.38
DV200..
AD6/P 19.49 17.99 6.42 10.63 13.19 10.83 13.19 12.36 4.49 1.875 0.64 3.15 2.09 0.50
DV225..
AD4/P DV132.. 13.58 11.46 4.49 10.63 14.17 12.40 14.17 7.60 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
DV160.. 2.76
AD5/P 16.93 13.98 6.02 10.83 12.80 12.99 15.94 10.47 4.45 1.625 0.58 1.79 0.375
DV180..
5/8 - 11 x 1.38
R..147 DV200.. 17.72
AD6/P 19.49 17.99 6.42 11.61 14.17 12.20 14.17 12.05 4.49 1.875 4.33 3.15 2.09
DV225..
3) 0.64 0.50
D250..
AD7/P 25.59 22.44 6.69 11.81 14.37 11.81 14.37 11.81 4.41 2.125 3.54 2.35 3/4 - 10 x 1.61
D280..3)
DV160..
AD5/P 16.93 13.98 6.02 13.58 15.94 15.16 19.49 10.16 4.45 1.625 0.58 2.76 1.79 0.375
DV180..
5/8 - 11 x 1.38
DV200..
R..167 AD6/P 19.49 17.99 21.65 6.42 14.76 11.73 4.49 1.875 4.33 3.15 2.09
DV225..
14.76 18.70 18.70 0.64 0.50
D250..
AD7/P 25.59 22.44 6.69 14.96 11.50 4.41 2.125 3.54 2.35 3/4 - 10 x 1.61
D280..
1)
Column can project beyond the foot mounting surface, depending on the setting.
2)
Motor mounting platform can project beyond the foot mounting surface.
3)
Motor mounting platform can collide with the gear unit flange, depending on the setting.
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
ZE
F27.. C
5.75 ZC
BF1
GA1
Z
2.81 2.56
ø 4.72
0.39
Z FY
0.63
FZ
BD1
AK1
AJ1
FU
2.36 3.89
8.78
L
4.57
3.94
1.22
M8
BB1
M8
1.97
.39
3/8 - 16 x 0.87
0.20 1.57
ø3
0.25
ø 1.000*
1.11
ø 2.91*
ø 2.91*
ø 2.91*
ø 2.28
M10x30mm
Me = ø 28.05mm-0.03mm
ø 1.57
ø 1.57
ø 32mm+0.1mm
ø 25mm*
ø 25mm*
ø 1.000*
3.50 0.87
3/8 - 16 x 1 25x1.25x30x18mm
0.98 1.18 2.83
ø 25mm*
ø 25mm*
ø 36mmmin
D.. M10
Dm = ø 2.25mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
ø 4.72
1.97
0.39 Z FY
0.14
FZ
BD1
AK1
AJ1
FU
8.78
2.36 3.89
ø 1.000*
L
ø 4.33* 12 .30
5.35
5. ø6
ø
BB1
AA
ø 0.33 5.35
1.97 5.91
3/8 - 16 x 0.87
0.20 1.57 0.25
ø 1.000*
1.11
ø 2.28
M10x30mm
Me = ø 28.05mm-0.03mm
ø 1.57
ø 1.57
+0.1mm
ø 25mm*
ø 25mm*
ø 1.000*
0.67
ø 32mm
0.67 0.67
3.50 0.87
3/8 - 16 x 1 25x1.25x30x18mm
0.98 1.18 2.83
ø 25mm*
ø 25mm*
ø 36mmmin
D.. M10
Dm = ø 2.25mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 4.72
ø 0.55
Z
2.17
ø 0.49+0.02
BD1
AK1
AJ1
ø 1.57
20˚
5.51
8.78
2.36 3.89
BB1 ZE
AA 6.06
BF1
Z
FY
FZ
FU
L
ø 2.28
M10x30mm
Me = ø 28.05mm-0.03mm
ø 1.57
ø 1.57
+0.1mm
ø 25mm*
ø 25mm*
ø 1.000*
0.67 0.67
ø 32mm
0.67
3.50
3/8 - 16 x 1 0.87
25x1.25x30x18mm
0.98 1.18 2.83
ø 25mm*
ø 25mm*
ø 36mmmin
D.. M10
Dm = ø 2.25mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
ø 4.72
Z FY
FZ
BD1
AK1
AJ1
8.78
FU
2.36 3.89
L
ø 2.91*
ø 4.02
BB1
AA 5.91
M8
0.63
.39
ø3
FAZ27.. 3.74 ZC FHZ27.. 3.74 ZC FVZ27.. 3.74 ZC
0.12 0.12 0.12
ø 1.57
ø 1.57
ø 2.91*
ø 2.91*
ø 2.91*
ø 2.28
M10x30mm
Me = ø 28.05mm-0.03mm
ø 1.57
ø 1.57
ø 32mm+0.1mm
ø 25mm*
ø 25mm*
ø 1.000*
ø 25mm*
ø 36mmmin
D.. M10
Dm = ø 2.25mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
ø 4.72
2.85 3.03
Z FY
0.79
FZ
1
BD1
AK1
AJ
FU
4.41
9.92
L
4.53
5.31
M8
1.22
2.99
BB1
AA
M8
0.43 3.74 6.50
0.43
1.97 ø 78
3/8 - 16 x 0.87 3. ˚
0.20 1.57 0.25 70
ø 1.000*
1.11
77˚
77
˚
50˚
ø 2.95
0.10 0.10 0.10
0.89 0.89 0.89
4.84 6.10 4.80
Me = ø 33.03mm-0.03mm
M10x30mm
ø 1.77
ø 1.77
+0.1mm
ø 30mm*
ø 1.250*
ø 30mm*
0.67 0.71
ø 37mm
0.71
4.13 0.98
7/16 - 14 x 1 30x1.25x30x22mm
0.98 1.42 3.35
ø 30mm*
ø 30mm*
ø 42mmmin
D.. M10
Dm = ø 2.75mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
ø 4.72
1.97 0.39
Z FY
0.14
FZ
BD1
AK1
1
AJ
FU
4.41
9.92
L
ø 1.000*
ø 4.33*
ø 6.30
.72
ø4
2.99
BB1
AA
ø 0.39
1.97 6.50
3/8 - 16 x 0.87 0.20 1.57 0.25
ø 1.000*
FHF37.. 1.11
5.43 ZC 5.43 5.43 ZC
FAF37.. ZC
FVF37..
ø 6.30
ø 6.30
ø 6.30
ø 2.95
Me = ø 33.03mm-0.03mm
M10x30mm
ø 1.77
ø 1.77
ø 37mm+0.1mm
ø 30mm*
ø 1.250*
ø 30mm*
ø 42mmmin
D.. M10
Dm = ø 2.75mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 4.72
min 0.2 f = 0.04
0.47
ø 0.55
1.18
Z
+0.02
1
BD1
AK1
AJ
25˚
ø 1.57
ø 0.49
6.22
4.41
9.92
2.99
BB1
ZE
AA
6.77
BF1
Z
FY
FZ
FU
L
ø 3.07
Me = ø 33.03mm-0.03mm
M10x30mm
ø 1.77
ø 1.77
ø 37mm+0.1mm
ø 30mm*
ø 1.250*
ø 30mm*
ø 42mmmin
D.. M10
Dm = ø 2.75mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 4.72
0.45
Y Z
0.12
M8
ø 3.15*
BD1
AK1
AJ1
Y
4.41
9.92
ø 0.35
ø 3.15*
0.35
ø 4.33
2.99
BB1
AA
6.50
ZE
78
˚
BF1
Z ø3
.70
FY
77˚
FZ
77
˚
50˚
FU
L
ø 2.95
Me = ø 33.03mm-0.03mm
M10x30mm
ø 1.77
ø 1.77
+0.1mm
ø 30mm*
ø 1.250*
ø 30mm*
0.67 0.71
ø 37mm
0.71
4.13 0.98
7/16 - 14 x 1 30x1.25x30x22mm
0.98 1.42 3.35
ø 30mm*
ø 30mm*
ø 42mmmin
D.. M10
Dm = ø 2.75mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
ø 4.72
3.58 3.66
Z FY
0.79
FZ
AJ1
BD1
AK1
FU
10.59
5.04
L
5.71
6.50
M8
1.69
3.03
BB1
AA
M10
0.43 4.29 7.09
0.59 45
2.36 45˚ ˚
1/2 - 13 x 1.12
45
0.26 1.96 0.25
˚
ø 4.02
ø 1.250*
1.36
35˚
35˚
55 ˚
˚ 55
ø 3.27
Me = ø 38.92mm-0.03mm
M10x30mm
ø 1.97
ø 1.97
ø 37mm+0.1mm
ø 35mm*
ø 1.375*
ø 35mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
FF47.. C ZE
8.58 ZC
BF1
GA1 Z
ø 4.72
2.36 0.47
Z FY
0.14
FZ
BD1
AK1
1
AJ
FU
5.04
10.59
L
ø 1.250*
ø 5.12*
.50
ø 7.87
ø6
3.03
BB1
AA
ø 0.43
2.36 7.09
1/2 - 13 x 1.12
0.26 1.69 0.25
ø 1.250*
1.36
6.38 ZC 6.38 ZC
FAF47.. FHF47.. 6.38 ZC
FVF47..
ø 7.87
ø 7.87
ø 7.87
ø 3.27
Me = ø 38.92mm-0.03mm
M10x30mm
ø 1.97
ø 1.97
ø 37mm+0.1mm
ø 35mm*
ø 1.375*
ø 35mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 0.55
ø 4.72
0.47
0.87
Z
ø 0.49+0.02
AJ1
BD1
AK1
25˚
ø 1.57
6.69
10.59
5.04
3.03
BB1
AA ZE
7.44
BF1
Z
FY
FZ
FU
L
ø 3.27
Me = ø 38.92mm-0.03mm
M10x30mm
ø 1.97
ø 1.97
ø 37mm+0.1mm
ø 35mm*
ø 1.375*
ø 35mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 4.72
0.43
Y Z
0.12
M8
ø 3.15*
AJ1
BD1
AK1
Y
5.04
10.59
ø 0.35
0.31
ø 3.15*
ø 4.72
3.03
BB1
AA
7.09
ZE
45
45˚ ˚
BF1
Z ø4
.02
45
˚
FY
35˚
35˚
FZ
55
˚ 55˚
FU
L
ø 3.27
Me = ø 38.92mm-0.03mm
M10x30mm
ø 1.97
ø 1.97
ø 37mm+0.1mm
ø 35mm*
ø 1.375*
ø 35mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 6.30
4.11 4.02
Z FY
0.98
FZ
AJ1
BD1
AK1
FU
12.48
5.35
L
6.69
7.68
M12
2.17
3.66
BB1
M12
AA
0.67 4.96 7.87
0.67
47˚
2.76 47˚
1/2 - 13 x 1.12
43
0.43 2.20 0.31
˚
ø 4.92
ø 1.375*
1.51
60
˚
60
˚
60˚
ø 3.27
0.12 0.12 0.12
1.32 1.32 1.32
6.69 7.87 6.61
Me = ø 38.92mm-0.03mm
M10x30mm
ø 2.17
ø 2.17
+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
1.36 0.71
ø 37mm
0.71
5.59 1.26
5/8 - 11 x 1-3/4 35x2x30x16mm
0.98 1.22 5.12
ø 40mm*
ø 40mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 6.30
4.11 4.02
Z FY
0.98
FZ
BD1
AK1
1
AJ
FU
12.48
5.35
L
6.69
7.68
M12
2.17
3.66
BB1
M12
AA
0.67 4.96 7.87
0.67
47˚
2.76 47˚
1/2 - 13 x 1.12
43
0.43 2.20 0.31
˚
ø 4.92
ø 1.375*
1.51
60
˚
60
˚
60˚
ø 3.27
Me = ø 38.92mm-0.03mm
M10x30mm
ø 2.17
ø 2.17
+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
1.36 0.71
ø 37mm
0.71
5.59 1.26
5/8 - 11 x 1-3/4 35x2x30x16mm
0.98 1.22 5.12
ø 40mm*
ø 40mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 6.30
7.09 0.59
Z FY
0.16
FZ
AJ1
BD1
AK1
FU
5.35
12.48
L
ø 1.375*
ø 7.09*
.46
ø 9.84
ø8
3.66
BB1
AA
ø 0.53
7.87
2.76
1/2 - 13 x 1.12
0.43 2.20 0.31
ø 1.375*
1.51
FAF57.. 6.97 ZC FHF57.. 6.97 ZC
FVF57.. 6.97 ZC
ø 9.84
ø 9.84
ø 3.27
ø 9.84
0.93 6.69 0.93 7.87 0.93 6.61
Me = ø 38.92mm-0.03mm
M10x30mm
ø 2.17
ø 2.17
ø 37mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 6.30
7.09 0.59
Z FY
0.16
FZ
BD1
AK1
1
AJ
FU
5.35
12.48
L
ø 1.375*
ø 7.09*
.47
ø 9.84
ø8
3.66
BB1
AA
ø 0.53
7.87
2.76
1/2 - 13 x 1.12
0.43 2.20 0.31
ø 1.375*
1.51
FAF57.. 6.97 ZC FHF57.. 6.97 ZC
FVF57.. 6.97 ZC
ø 9.84
ø 9.84
ø 3.27
ø 9.84
0.93 6.69 0.93 7.87 0.93 6.61
Me = ø 38.92mm-0.03mm
M10x30mm
ø 2.17
ø 2.17
ø 37mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.55
ø 0.55
1.22
Z
+0.02
AJ1
BD1
AK1
25˚
ø 0.49
ø 1.57
7.80
12.48
5.35
3.66
BB1 ZE
AA
BF1
8.27
Z
FY
FZ
FU
L
ø 3.27
Me = ø 38.92mm-0.03mm
M10x30mm
ø 2.17
ø 2.17
+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
1.36 0.71
ø 37mm
0.71
5.59 1.26
5/8 - 11 x 1-3/4 35x2x30x16mm
0.98 1.22 5.12
ø 40mm*
ø 40mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.55
ø 0.55
1.22
Z
+0.02
BD1
AK1
1
AJ
25˚
ø 0.49
ø 1.57
7.80
12.48
5.35
3.66
BB1 ZE
AA
BF1
8.27
Z
FY
FZ
FU
L
ø 3.27
Me = ø 38.92mm-0.03mm
M10x30mm
ø 2.17
ø 2.17
ø 37mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.47
0.14 Z
M12
Y
BD1
AK1
AJ1
ø 4.13*
Y
5.35
12.48
ø 0.53
0.35
ø 4.13*
ø 6.10
3.66
BB1
AA
7.87
ZE
47˚
47˚
BF1
Z ø4
.92
43˚
FY
FZ
60˚
60
˚
60˚
FU
L
ø 3.27
Me = ø 38.92mm-0.03mm
M10x30mm
ø 2.17
ø 2.17
ø 37mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.47
0.14 Z
M12
Y
BD1
AK1
1
ø 4.13*
AJ
Y
5.35
12.48
ø 0.53
0.35
ø 4.13*
ø 6.10
3.66
BB1
AA
7.87
ZE
47˚
47˚
BF1
Z ø4
.92
43˚
FY
FZ
60˚
60
˚
60˚
FU
L
ø 3.27
Me = ø 38.92mm-0.03mm
M10x30mm
ø 2.17
ø 2.17
+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
1.36 0.71
ø 37mm
0.71
5.59 1.26
5/8 - 11 x 1-3/4 35x2x30x16mm
0.98 1.22 5.12
ø 40mm*
ø 40mm*
ø 42mmmin
D.. M10
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 6.30
4.67 4.41
Z FY
0.98
FZ
AJ1
BD1
AK1
FU
13.50
6.28
L
7.48
8.46
M12
2.36
3.82
BB1
AA
M12
0.67 5.16 8.35
0.67
47˚
3.15 47˚
5/8 - 11 x 1.38
0.38 2.25 0.38
43
ø 4.92
˚
ø 1.625*
1.79
60
˚
60
˚
60˚
ø 3.66
0.14 0.14 0.14
1.46 1.46 1.46
7.24 8.48 7.09
Me = ø 48.85mm-0.03mm
M16x50mm
ø 2.17
ø 2.17
ø 47mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 52mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 6.30
4.67 4.41
Z FY
0.98
FZ
BD1
AK1
1
AJ
FU
13.50
6.28
L
7.48
8.46
M12
2.36
3.82
BB1
AA
M12
0.67 5.16 8.35
0.67
47˚
3.15 47˚
5/8 - 11 x 1.38
0.38 2.25 0.38
43
ø 4.92
˚
ø 1.625*
1.79
60
˚
60
˚
60˚
ø 3.66
Me = ø 48.85mm-0.03mm
M16x50mm
ø 2.17
ø 2.17
ø 47mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 52mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
FF67.. C
ZE
AM56-145
10.39
BF1
GA1 Z
ø 6.30
3.15 0.59
Z FY
0.16
FZ
1
BD1
AK1
AJ
FU
13.50
6.28 L
ø 1.625*
ø 7.09*
.46
ø 9.84
ø8
3.82
BB1
AA
ø 0.53
3.15 8.35
5/8 - 11 x 1.38
0.38 2.25 0.38
ø 1.625*
1.79
FAF67.. 7.40 ZC
FHF67.. 7.40 ZC
FVF67.. 7.40 ZC
ø 9.84
ø 9.84
ø 9.84
ø 3.66
Me = ø 48.85mm-0.03mm
M16x50mm
ø 2.17
ø 2.17
ø 47mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 52mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
FF67.. C
ZE
AM182-365
10.39
BF1
GA1 Z
ø 6.30
3.15 0.59
Z FY
0.16
FZ
BD1
AK1
1
AJ
FU
13.50
6.28
ø 1.625*
ø 7.09*
ø 9.84 .46
ø8
3.82
BB1
AA
ø 0.53
3.15 8.35
5/8 - 11 x 1.38
0.38 2.25 0.38
ø 1.625*
ø 9.84
ø 9.84
ø 9.84
ø 3.66
Me = ø 48.85mm-0.03mm
M16x50mm
ø 2.17
ø 2.17
ø 47mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 52mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.63
ø 0.55
1.57
Z
ø 0.49+0.02
1
BD1
AK1
AJ
25˚
ø 1.57
8.58
13.50
6.28
3.82
BB1 ZE
AA
BF1
8.78
Z
FY
FZ
FU
L
ø 3.66
Me = ø 48.85mm-0.03mm
M16x50mm
ø 2.17
ø 2.17
ø 47mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 52mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.63
ø 0.55
1.57
Z
ø 0.49+0.02
BD1
AK1
1
AJ
25˚
ø 1.57
8.58
13.50
6.28
3.82
BB1 ZE
AA
BF1
8.78
Z
FZ FY
FU L
ø 3.66
Me = ø 48.85mm-0.03mm
M16x50mm
ø 2.17
ø 2.17
ø 47mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 52mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.47
Y 0.14 Z
M12
AJ1
ø 4.13*
BD1
AK1
Y
13.50
6.28
ø 0.53
ø 4.13*
0.33
ø 6.10
3.82 BB1
AA
8.35
ZE
47˚
47˚
BF1
ø4
Z .92
43˚
FY
60˚
60
FZ
˚
60˚
FU
L
ø 3.66
Me = ø 48.85mm-0.03mm
M16x50mm
ø 2.17
ø 2.17
ø 47mm+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
ø 52mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.47
Y 0.14 Z
M12
ø 4.13*
BD1
AK1
1
AJ
Y
13.50
6.28
ø 0.53
ø 4.13*
0.33
ø 6.10
3.82
BB1
AA
8.35
ZE
47˚
47˚
BF1
ø4
Z .92
43˚
FY
60˚
60
FZ
˚
60˚
FU
L
ø 3.66
Me = ø 48.85mm-0.03mm
M16x50mm
ø 2.17
ø 2.17
+0.1mm
ø 40mm*
ø 1.500*
ø 40mm*
1.36 0.98
ø 47mm
0.98
6.14 1.65
5/8 - 11 x 1-3/4 45x2x30x21mm
0.98 1.69 5.12
ø 40mm*
ø 40mm*
ø 52mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
11.57
GA1
Z
ø 7.87
5.41 5.51
Z FY
1.38
FZ
1
BD1
AK1
AJ
FU
16.77
7.87
L
10.83
9.45
M12
2.76
4.76
BB1
AA
M16
0.67 6.50 10.63
1.02 40˚
3.94
3/4 - 10 x 1.61 0.64 2.63 0.50 ø 5.
2.22
59
(=280˚)
ø 2.000*
˚
40
7x
FA77B.. 7.60 ZC FH77B.. 7.60 ZC FV77B.. 7.60 ZC
ø 4.49
0.16 0.16 0.16
1.44 1.44 1.44
8.39 9.80 8.27
Me = ø 54.13mm-0.03mm
M16x50mm
ø 2.76
ø 2.76
+0.1mm
ø 50mm*
ø 2.000*
ø 50mm*
1.16 0.91
ø 55mm
0.91
7.20 2.05
5/8 - 11 x 1-3/4 50x2x30x24mm
1.38 1.61 6.30
ø 50mm*
ø 50mm*
ø 62mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
11.57
GA1
Z
ø 7.87
5.41 5.51
Z FY
1.38
FZ
BD1
AK1
1
AJ
FU
16.77
7.87
L
10.83
9.45
M12
2.76
4.76
BB1
AA
M16
0.67 6.50 10.63
1.02 40˚
3.94
3/4 - 10 x 1.61 0.64 2.63 0.50 ø 5.
2.22
59
(=280˚)
ø 2.000*
˚
40
7x
FA77B.. 7.60 ZC FH77B.. 7.60 ZC FV77B.. 7.60 ZC
ø 4.49
Me = ø 54.13mm-0.03mm
M16x50mm
ø 2.76
ø 2.76
+0.1mm
ø 50mm*
ø 2.000*
ø 50mm*
1.16 0.91
ø 55mm
0.91
7.20 2.05
5/8 - 11 x 1-3/4 50x2x30x24mm
1.38 1.61 6.30
ø 50mm*
ø 50mm*
ø 62mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
FF77.. C
ZE
AM56-145
BF1
12.99
GA1
Z
3.94 0.63
ø 7.87
Z FY
0.16
FZ
AJ1
BD1
AK1
FU
16.77
7.87
L
ø 2.000*
ø 9.06*
ø 11.81
3
0.4
ø1
4.76
BB1
AA
ø 0.53
3.94 10.63
3/4 - 10 x 1.61 0.64 2.63 0.50
2.22
ø 2.000*
FAF77.. 9.21 ZC
FHF77.. 9.21 ZC
FVF77.. 9.21 ZC
ø 11.81
ø 11.81
ø 11.81
ø 4.49
Me = ø 54.13mm-0.03mm
M16x50mm
ø 2.76
ø 2.76
+0.1mm
ø 50mm*
ø 2.000*
ø 50mm*
1.16 0.91
ø 55mm
0.91
7.20 2.05
5/8 - 11 x 1-3/4 50x2x30x24mm
1.38 1.61 6.30
ø 50mm*
ø 50mm*
ø 62mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
FF77.. ZE
C AM182-365
BF1
12.99
GA1
Z
3.94 0.63
ø 7.87
Z FY
0.16
FZ
BD1
AK1
1
AJ
FU
16.77
7.87
L
ø 2.000*
ø 9.06*
ø 11.81
3
0.4
ø1
4.76
BB1
AA
ø 0.53
3.94 10.63
3/4 - 10 x 1.61 0.64 2.63 0.50
2.22
ø 2.000*
FAF77.. 9.21 ZC
FHF77.. 9.21 ZC
FVF77.. 9.21 ZC
ø 11.81
ø 11.81
ø 11.81
ø 4.49
Me = ø 54.13mm-0.03mm
M16x50mm
ø 2.76
ø 2.76
+0.1mm
ø 50mm*
ø 2.000*
ø 50mm*
1.16 0.91
ø 55mm
0.91
7.20 2.05
5/8 - 11 x 1-3/4 50x2x30x24mm
1.38 1.61 6.30
ø 50mm*
ø 50mm*
ø 62mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 7.87
0.79
ø 0.87
1.93
Z
ø 0.83+0.02
AJ1
BD1
AK1
25˚
ø 2.36
10.94
16.77
7.87
4.76
BB1
AA ZE
11.10
BF1
Z
FY
FZ
FU
L
ø 4.49
Me = ø 54.13mm-0.03mm
M16x50mm
ø 2.76
ø 2.76
ø 55mm+0.1mm
ø 50mm*
ø 2.000*
ø 50mm*
ø 62mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.79
ø 0.87
1.93
Z
ø 0.83+0.02
BD1
AK1
1
AJ
25˚
ø 2.36
10.94
16.77
7.87
4.76
BB1
AA
11.10
BF1
Z
FY
FZ
FU
L
ø 4.49
Me = ø 54.13mm-0.03mm
M16x50mm
ø 2.76
ø 2.76
ø 55mm+0.1mm
ø 50mm*
ø 2.000*
ø 50mm*
ø 62mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 7.87
0.55
0.14 Z
M12
AJ1
BD1
ø 4.92*
AK1
Y
7.87
16.77
ø 0.53
0.39
ø 4.92*
ø 6.69
4.76 BB1
AA
ZE 10.63
40˚
BF1
Z
ø 5.
59
FY
(=280˚)
FZ
˚
40
7x
FU
L
ø 4.49
Me = ø 54.13mm-0.03mm
M16x50mm
ø 2.76
ø 2.76
ø 55mm+0.1mm
ø 50mm*
ø 2.000*
ø 50mm*
ø 62mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
0.55
0.14 Z
M12
BD1
ø 4.92*
AK1
1
AJ
Y
7.87
16.77
ø 0.53
0.39
ø 4.92*
ø 6.69
4.76
BB1
AA
ZE 10.63
40˚
BF1
Z
ø 5.
59
FY
(=280˚)
FZ
˚
40
7x
FU
L
ø 4.49
Me = ø 54.13mm-0.03mm
M16x50mm
ø 2.76
ø 2.76
ø 55mm+0.1mm
ø 50mm*
ø 2.000*
ø 50mm*
ø 62mmmin
D.. M16
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
13.54
GA1
Z
ø 9.84
6.42 6.50
Z FY
1.57
FZ
AJ1
BD1
AK1
FU
20.91
9.71
L
12.20
13.78
M16
3.94
5.98
BB1
AA
M16
1.02 7.68 12.99
1.02
45˚
4.72 45˚
45
3/4 - 10 x 1.61
0.51 3.63 0.63
˚
ø 7.0
1
ø 2.375*
2.65
60
˚
60
˚
60˚
ø 6.26
0.16 0.16 0.16
1.69 1.69 1.69
9.57 11.46 9.45
Me = ø 68.96mm-0.04mm
M20x60mm
ø 3.35
ø 3.35
ø 72mm+0.1mm
ø 65mm*
ø 2.375*
ø 65mm*
ø 82mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
13.54
GA1
Z
ø 9.84
6.42 6.50
Z FY
1.57
FZ
BD1
AK1
1
AJ
FU
20.91
9.71
L
12.20
13.78
M16
3.94
5.98
BB1
AA
M16
1.02 7.68 12.99
1.02
45˚
4.72 45˚
45
3/4 - 10 x 1.61
0.51 3.63 0.63
˚
ø 7.0
1
ø 2.375*
2.65
60
˚
60
˚
60˚
ø 6.26
Me = ø 68.96mm-0.04mm
M20x60mm
ø 3.35
ø 3.35
ø 72mm+0.1mm
ø 65mm*
ø 2.375*
ø 65mm*
ø 82mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
14.72
GA1
Z
ø 9.84
4.72 0.71
Z FY
0.20
FZ
AJ1
BD1
AK1
FU
20.91
9.71
L
ø 2.375*
ø 9.84*
ø 13.78
1
1.8
5.98 ø1
BB1
AA
ø 0.69
4.72 12.99
3/4 - 10 x 1.61
0.51 3.63 0.63
ø 2.375*
2.65
FAF87.. 10.20 ZC FHF87.. 10.20 ZC
FVF87.. 10.20 ZC
ø 13.78
ø 13.78
ø 13.78
ø 6.26
Me = ø 68.96mm-0.04mm
M20x60mm
ø 3.35
ø 3.35
+0.1mm
ø 65mm*
ø 2.375*
ø 65mm*
1.39 0.98
ø 72mm
0.98
8.27 2.44
3/4 - 10 x 2 65x2x30x31mm
1.77 1.81 7.09
ø 65mm*
ø 65mm*
ø 82mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
14.72
GA1
Z
ø 9.84
4.72 0.71
Z FY
0.20
FZ
BD1
AK1
1
AJ
FU
20.91
9.71
L
ø 2.375*
ø 9.84*
ø 13.78
1
1.8
ø1
5.98
BB1
AA
ø 0.69
4.72 12.99
3/4 - 10 x 1.61
0.51 3.63 0.63
ø 2.375*
2.65
FAF87.. 10.20 ZC FHF87.. 10.20 ZC
FVF87.. 10.20 ZC
ø 13.78
ø 13.78
ø 13.78
ø 6.26
Me = ø 68.96mm-0.04mm
M20x60mm
ø 3.35
ø 3.35
+0.1mm
ø 65mm*
ø 2.375*
ø 65mm*
1.39 0.98
ø 72mm
0.98
8.27 2.44
3/4 - 10 x 2 65x2x30x31mm
1.77 1.81 7.09
ø 65mm*
ø 65mm*
ø 82mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 9.84
1.02
ø 0.87
2.24
Z
ø 0.83+0.02
AJ1
BD1
AK1
25˚
ø 2.36
13.62
20.91
9.71
5.98
BB1
AA ZE
13.23
BF1
Z
FY
FZ
FU
L
ø 6.26
Me = ø 68.96mm-0.04mm
M20x60mm
ø 3.35
ø 3.35
ø 72mm+0.1mm
ø 65mm*
ø 2.375*
ø 65mm*
ø 82mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 9.84
1.02
ø 0.87
2.24
Z
+0.02
BD1
AK1
1
25˚
AJ
ø 2.36
13.62
ø 0.83
20.91
9.71
5.98
BB1
AA ZE
13.23
BF1
Z
FY
FZ
FU
L
ø 6.26
Me = ø 68.96mm-0.04mm
M20x60mm
ø 3.35
ø 3.35
+0.1mm
ø 65mm*
ø 2.375*
ø 65mm*
1.39 0.98
ø 72mm
0.98
8.27 2.44
3/4 - 10 x 2 65x2x30x31mm
1.77 1.81 7.09
ø 65mm*
ø 65mm*
ø 82mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 9.84
0.59
0.16 Z
M16
AJ1
ø 6.10*
BD1
AK1
Y
20.91
9.71
ø 0.69
0.43
ø 6.10*
ø 8.46
5.98
BB1
AA
ZE 12.99
45˚
45˚
BF1
Z
45˚
ø 7.0
1
FY
FZ
60˚
60
˚
60˚
FU
L
ø 6.26
Me = ø 68.96mm-0.04mm
M20x60mm
ø 3.35
ø 3.35
ø 72mm+0.1mm
ø 65mm*
ø 2.375*
ø 65mm*
ø 82mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 9.84
0.59
0.16 Z
M16
ø 6.10*
BD1
AK1
1
AJ
Y
20.91
9.71
ø 0.69
0.43
ø 6.10*
ø 8.46
5.98
BB1
AA
ZE 12.99
45˚
45˚
BF1
Z
45˚
ø 7.0
1
FY
FZ
60˚
60
˚
60˚
FU
L
ø 6.26
Me = ø 68.96mm-0.04mm
M20x60mm
ø 3.35
ø 3.35
ø 72mm+0.1mm
ø 65mm*
ø 2.375*
ø 65mm*
ø 82mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
ø 11.81
GA1
7.50 8.07
Z FY
1.97
FZ
BD1
AK1
1
AJ
FU
11.22
24.53
L
13.78
15.75
M16
4.72
7.01
BB1
AA
M20
1.02 9.45 15.74
1.10
35˚ 35˚
5.51
3/4 - 10 x 1.61
40
0.67 4.13 0.75 ø8
˚
.66
ø 2.875*
45˚
45˚
3.20
40 ˚
˚
40˚ 40
FA97B.. 10.79 ZC
FH97B.. 10.79 ZC FV97B.. 10.79 ZC
ø 6.85
Me = ø 74.15mm-0.04mm
M20x60mm
ø 3.74
ø 3.74
+0.1mm
ø 75mm*
ø 2.750*
ø 75mm*
1.24 0.98
ø 72mm
0.98
10.63 2.83
3/4 - 10 x 2 70x2x30x34mm
2.17 2.36 9.45
ø 75mm*
ø 75mm*
ø 90mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
ø 11.81
GA1
5.51 0.87
Z FY
0.20
FZ
BD1
AK1
1
AJ
FU
11.22
24.53
L
ø 2.875*
ø 13.78*
5
ø 17.72
.7
15
7.01 ø
BB1
AA
ø 0.69
5.51 15.75
3/4 - 10 x 1.61
0.67 4.13 0.75
ø 2.875*
3.20
12.64 ZC 12.64 ZC 12.64 ZC
FAF97.. FHF97.. FVF97..
ø 17.72
ø 17.72
ø 17.72
ø 6.85
Me = ø 74.15mm-0.04mm
M20x60mm
ø 3.74
ø 3.74
+0.1mm
ø 75mm*
ø 2.750*
ø 75mm*
1.24 0.98
ø 72mm
0.98
10.63 2.83
3/4 - 10 x 2 70x2x30x34mm
2.17 2.36 9.45
ø 75mm*
ø 75mm*
ø 90mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 11.81
GA1 min 0.47 f = 0.20
1.18
ø 1.02
3.46
Z
ø 3.15
+0.02
BD1
AK1
1
25˚
AJ
15.55
ø 0.98
11.22
24.53
7.01
BB1
AA
ZE 16.30
BF1
Z
FY
FZ
FU
ø 6.85
Me = ø 74.15mm-0.04mm
M20x60mm
ø 3.74
ø 3.74
+0.1mm
ø 75mm*
ø 2.750*
ø 75mm*
1.24 0.98
ø 72mm
0.98
10.63 2.83
3/4 - 10 x 2 70x2x30x34mm
2.17 2.36 9.45
ø 75mm*
ø 75mm*
ø 90mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 11.81
GA1
0.71
0.16 Z
M16
BD1
AK1
ø 7.09*
1
AJ
Y
11.22
24.53
ø 0.69
0.55
ø 7.09*
ø 10.24
7.01
BB1
AA
ZE 15.75
BF1
Z 35˚ 35˚
ø8
40
.66
FY
˚
45˚
45˚
FZ
40 ˚
40
FU
˚
L 40˚
ø 6.85
Me = ø 74.15mm-0.04mm
M20x60mm
ø 3.74
ø 3.74
ø 72mm+0.1mm
ø 75mm*
ø 2.750*
ø 75mm*
ø 90mmmin
D.. M20
Dm = ø 4mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
ø 13.78
GA1
9.51 8.66
Z FY
2.36
FZ
BD1
AK1
1
AJ
FU
28.23
13.09
L
15.75
18.11
4.92
7.87
BB1
AA
M24
10.24 17.72
1.42
6.69
1 - 8 x 2.13 0.63 5.38 0.88
4.01
ø 3.625*
ø 7.87
0.10 0.10 0.10
2.74 2.74 2.74
13.90 16.54 13.90
Me = ø 90.99mm-0.04mm
M20x60mm
ø 4.65
ø 4.65
+0.1mm
ø 95mm*
ø 3.625*
ø 95mm*
1.24 1.02
ø 90mm
1.02
12.32 3.50
3/4 - 10 x 2 85x3x30x27mm
2.76 2.95 11.41
ø 95mm*
ø 95mm*
ø 105mmmin
D.. M20
Dm = ø 6mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
ø 13.78
GA1
6.69 0.87
Z FY
0.20
FZ
BD1
AK1
1
AJ
FU
28.23
13.09
L
ø 13.78*
ø 3.625*
5
ø 17.72
.7
15
ø
7.87 BB1
AA
ø 0.69
6.69 17.72
1 - 8 x 2.13 0.63 5.38 0.88
4.01
ø 3.625*
FAF107.. 14.09 ZC
FHF107.. 14.09 ZC
FVF107.. 14.09 ZC
ø 17.72
ø 17.72
ø 17.72
ø 7.87
Me = ø 90.99mm-0.04mm
M20x60mm
ø 4.65
ø 4.65
+0.1mm
ø 95mm*
ø 3.625*
ø 95mm*
1.24 1.02
ø 90mm
1.02
12.32 3.50
3/4 - 10 x 2 85x3x30x27mm
2.76 2.95 11.41
ø 95mm*
ø 95mm*
ø 105mmmin
D.. M20
Dm = ø 6mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 13.78
GA1
1.42
ø 1.02
F..107/G..
4.25
Z
+0.02
1.57
ø 3.15
ø 0.98
BD1
AK1
J1 min 0.47
25˚
A f = 0.24
19.09
28.23
13.09
7.87
BB1
AA
ZE 17.95
BF1
Z
FY
FZ
FU
ø 7.87
Me = ø 90.99mm-0.04mm
M20x60mm
ø 4.65
ø 4.65
+0.1mm
ø 95mm*
ø 3.625*
ø 95mm*
1.24 1.02
ø 90mm
1.02
12.32 3.50
3/4 - 10 x 2 85x3x30x27mm
2.76 2.95 11.41
ø 95mm*
ø 95mm*
ø 105mmmin
D.. M20
Dm = ø 6mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 13.78
0.87 GA1
0.16 Z
ø 0.87
M20
BD1
AK1
ø 8.27*
1
AJ
Y
13.09
28.23
ø 8.27*
ø 11.97
0.31
7.87
BB1
AA
ZE 17.72
30˚
BF1
Z ø1 30˚
37
0.2
4
.5
˚
FY
45˚
FZ
45 ˚
˚ 45
FU
L 45˚
ø 7.87
Me = ø 90.99mm-0.04mm
M20x60mm
ø 4.65
ø 4.65
ø 90mm+0.1mm
ø 95mm*
ø 3.625*
ø 95mm*
ø 105mmmin
D.. M20
Dm = ø 6mm
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 17.72
11.46 10.63
0.39
Z FY
2.76
FZ
1
BD1
AK1
AJ
15.06
33.70
FU
20.47
17.72
L
5.59
9.29
BB1
12.44 20.87
AA
8.27
M30
1 - 8 x 2.13
1.09 6.00 1.00
ø 4.375*
1.77
4.82
ø 9.17
0.10 0.10
3.12 3.12
16.26 19.76
ø 105mm*
ø 105mm*
16.14 1.00 19.09
ø 5.31
ø 5.31
4.44
ø 4.000*
3.35
ø 105mm*
1.26 2.76
ø 105mm*
1 - 8 x 2-1/4
14.69 3.15 3.74
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
ø 17.72
0.39
8.27 Z FY
0.98
FZ
1
BD1
0.20
AK1
AJ
33.70
15.06
FU
L
ø 17.72*
ø 4.33*
ø 21.65
ø 19.69
9.29
BB1
ø 0.69
AA
20.87
8.27
1 - 8 x 2.13
1.09 6.00 1.00
ø 4.375*
4.82
ø 21.65
ø 21.65
ø 9.17
2.01 16.26 2.01 19.76
ø 105mm*
ø 105mm*
16.14 1.00 19.09
ø 5.31
ø 5.31
4.44
ø 4.000*
3.35
ø 105mm*
1.26 2.76
ø 105mm*
1 - 8 x 2-1/4
14.69 3.15 3.74
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 17.72
ø 1.30
0.59 1.57 f = 0.35
Z min 0.59
5.43
1
BD1
AK1
ø 3.94
+0.02
AJ
25˚
21.65
15.06
33.70
ø 1.26
9.29
BB1
ZE 20.87
AA
BF1
FY
FZ
FU
FA127.. FH127..
14.69 ZC 14.69 ZC
ø 9.17
0.10 0.10
16.26 19.76
ø 105mm*
ø 105mm*
16.14 1.00 19.09
ø 5.31
ø 5.31
4.44
ø 4.000*
3.35
ø 105mm*
1.26 2.76
ø 105mm*
1 - 8 x 2-1/4
14.69 3.15 3.74
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 17.72
0.59 0.20
Z
ø 0.87
M20
1
BD1
AK1
AJ
Y
12.94
33.70
ø 9.84*
ø 13.78
9.29
ø 9.84*
BB1
ZE AA 20.87
30˚
BF1
Z
FY
1
ø 11.8
30˚
FZ
10x
FU
FAZ127.. 14.86 ZC
FHZ127.. 14.86 ZC
ø 9.17
16.26 19.76
ø 105mm*
ø 105mm*
16.14 1.00 19.09
ø 5.31
ø 5.31
4.44
ø 4.000*
3.35
ø 105mm*
1.26 2.76
ø 105mm*
1 - 8 x 2-1/4
14.69 3.15 3.74
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
26.06 ZC
GA1
Z
ø 21.65
12.80 12.20
0.59
Z FY
3.15
FZ
1
BD1
AK1
AJ
17.60
40.20
FU
24.41
21.26
L
6.69
11.26
BB1
14.33 25.98
AA
8.27
1 - 8 x 2.13
M36
0.82 6.56 1.25
ø 4.750*
2.17
5.29
ø 10.83
0.28 0.28
4.65 4.65
19.80 23.54
ø 125mm*
ø 125mm*
19.69 1.00 22.83
ø 6.10
ø 6.10
4.95
ø 4.500*
3.54
ø 125mm*
1.26 3.15
ø 125mm*
1 - 8 x 2-1/4
18.11 3.54 3.94
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
28.54 ZC
GA1
Z
ø 21.65
8.27
0.59
1.10 Z FY
FZ
1 0.24
BD1
AK1
AJ
40.20
17.60
FU
ø 21.65*
L
ø 4.750*
ø 25.98
2
ø 23.6
11.26
BB1
ø 0.87
AA
25.98
8.27
1 - 8 x 2.13
0.82 6.56 1.25
ø 4.750*
5.29
ø 25.98
ø 10.83
2.36 19.80 2.36 23.54
ø 125mm*
ø 125mm*
19.69 1.00 22.83
ø 6.10
ø 6.10
4.95
ø 4.500*
3.54
ø 125mm*
1.26 3.15
ø 125mm*
1 - 8 x 2-1/4
18.11 3.54 3.94
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 21.65
3.86
0.59 1.77 f = 0.35
ø 1.30
Z min 0.59
6.69
1
BD1
AK1
ø 3.94
ø 1.26+0.02
AJ
25˚
25.98
40.20
17.60
11.26
BB1
25.98
ZE AA
BF1
FY
FZ
FU
17.91
FA157.. ZC FH157.. 17.91 ZC
ø 10.83
0.28 0.28
19.80 23.54
ø 125mm*
ø 125mm*
19.69 1.00 22.83
ø 6.10
ø 6.10
4.95
ø 4.500*
3.54
ø 125mm*
1.26 3.15
ø 125mm*
1 - 8 x 2-1/4
18.11 3.54 3.94
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 21.65
1.10
0.59 0.20
Z
ø 1.02
M24
1
BD1
AK1
AJ
17.60 Y
40.20
ø 11.42*
ø 15.75
0.55
11.26
ø 11.42*
BB1
ZE AA 25.98
˚ 36
36 ˚
BF1
Z
36˚
36˚
9
FY ø 13.3
36˚
36˚
FZ
34 ˚
˚ 34
40˚
FU
17.91
FAZ157.. 17.91 ZC
FHZ157.. ZC
ø 10.83
0.55 0.55
19.80 23.54
ø 125mm*
ø 125mm*
19.69 1.00 22.83
ø 6.10
ø 6.10
4.95
ø 4.500*
3.54
ø 125mm*
1.26 3.15
ø 125mm*
1 - 8 x 2-1/4
18.11 3.54 3.94
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
ZC
PC
Z
FY
AK1
BD1
FZ
1
AJ
FU
L
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
ZC
<=AM200 >=AM225
PC
Z
FY
1 AJ1
AK1
BD1
FZ
AJ
FU
L
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BD2 ZC
F.. AQA.. Y
BF1 BB1
Y FY
FU
FZ
AK1
AJ1
BD2
PC
FU
ZE
BD2 ZC
F.. AQH.. Z
BF1 BB1
Z
FU
AJ1
BD2
AK1
PC
FU
ZE
L
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
FU
FZ
AJ1
AK1
BD2
PC
FU
ZE
BD2
F.. AQH.. ZC
Z
BF1 BB1
Z
FU
AJ1
AK1
BD2
PC
FU
ZE
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
BD2 ZC
F.. AQA.. Y
BF1 BB1
FY
Y
FU
FZ
AJ1
AK1
BD2
PC
FU
ZE
BD2
F.. AQH.. ZC
Z
BF1 BB1
Z FU
AJ1
AK1
BD2
PC
FU
ZE
L
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
Z LA
BF1 ZC
Z
WB
FY
FU
FZ
BD1
AK1
AJ1
PC
FU
ZE
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
Z LA
BF1 ZC
Z
WB
FY
FU
FZ
BD1
AJ1
AK1
PC
FU
ZE
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
F.. AD.. CC
FU
PC
FV
FP FO FZ
FU
FY
FM TAP
CC
AM
F.. AD../ZR AN
MA
AL*
FU
AE TAP
BF
PC
GC
VD
AL GC AE AN PC CC VD AM BF MA FU FV FO FP FY FZ FM TAP
TAP
F..27 AD1 - - - - 4.02 - - - - 0.625 0.70
F..37 4.72 1.57 0.25 1.26 0.1875 1/4 - 20 x 0.63
F..47 AD2 , AD2/ZR 2.17 0.53 3.15 0.31 5.12 0.47 1.97 0.35 M8 0.750 0.83
AD2 , AD2/ZR 2.17 0.53 3.15 4.84 0.47 1.97 0.35 M8 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
6.30
AD3 , AD3/ZR 2.76 0.61 4.13 6.26 0.63 2.36 0.43 M10 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
F..57 0.31 0.1875
F..67 AD2 , AD2/ZR 2.17 0.53 3.15 4.57 0.47 1.97 0.35 M8 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
F..77
AD3 , AD3/ZR 2.76 0.61 4.13 7.87 5.94 0.63 2.36 0.43 M10 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.82 0.79 3.76 0.53 M12 1.375 3.14 0.35 2.76 1.51 0.3125 1/2 - 13 x 1.12
AD2 , AD2/ZR 2.17 0.53 3.15 4.37 0.47 1.97 0.35 M8 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
0.31
AD3 , AD3/ZR 2.76 0.61 4.13 6.14 0.63 2.36 0.43 M10 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
F..87 9.84
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.62 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 0.43 11.50 4.96 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
AD3 , AD3/ZR 2.76 0.61 4.13 0.31 5.94 0.63 2.36 0.43 M10 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.43 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
F..97 11.81 0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 11.30 4.96 1.625 0.58 1.79 0.375
0.43 4.33 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 12.87 1.02 5.14 0.69 M16 1.875 0.64 3.15 2.09 0.50
AD3 , AD3/ZR 2.76 0.61 4.13 0.31 5.71 0.63 2.36 0.43 M10 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.19 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
F..107 13.78 0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 11.06 4.96 1.625 0.58 1.79 0.375
0.43 4.33 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 12.64 1.02 5.14 0.69 M16 1.875 0.64 3.15 2.09 0.50
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 7.60 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 10.47 4.96 1.625 0.58 1.79 0.375
0.43 5/8 - 11 x 1.38
F..127 AD6 , AD6/ZR 5.12 0.89 7.87 17.72 12.05 1.02 5.14 0.69 M16 1.875 4.33 3.15 2.09
0.64 0.50
AD7 , AD7/ZR 4.92 0.75 7.48 0.51 11.81 1.18 5.24 0.87 M20 2.125 3.54 2.35
3/4 - 10 x 1.61
AD8 , AD8/ZR 4.72 0.89 8.27 0.20 15.08 0.77 6.10 0.53 M12 2.750 5.51 0.90 4.33 3.03 0.625
AD5 , AD5/ZR 4.72 0.94 7.09 10.16 0.79 4.96 0.53 M12 1.625 0.58 2.76 1.79 0.375
0.43 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 11.73 1.02 5.14 0.69 M16 1.875 4.33 3.15 2.09
F..157 21.65 0.64 0.50
AD7 , AD7/ZR 4.92 0.75 7.48 0.51 11.50 1.18 5.24 0.87 M20 2.125 3.54 2.35
3/4 - 10 x 1.61
AD8 , AD8/ZR 4.72 0.89 8.27 0.20 14.72 0.77 6.10 0.53 M12 2.750 5.51 0.90 4.33 3.03 0.625
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
VK QD
AF FV
270˚
DHmax FV
0˚ FP FO FZ
DHmin
FU
FY
FU
PC
min
DMmax 180˚ FM TAP
DG
CC
VK AF PC DG DH DH DM DM
min max min max CC QD FU FV FO FP FY FZ FM TAP
DT71D
F..27 AD2/P DT80.. 7.68 7.09 4.72 2.56 3.94 6.50 4.92 6.50 5.12 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
DT90..
DT71D
F..37 AD2/P DT80.. 7.68 7.09 4.72 2.56 3.94 6.50 4.92 6.50 5.12 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
DT90..
DT71D
F..47 AD2/P DT80.. 7.68 7.09 4.72 2.56 4.13 6.50 4.92 6.50 5.12 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
DT90..
DT71D
AD2/P DT80.. 7.68 7.09 2.56 4.92 6.50 5.51 7.87 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
F..57 DT90.. 6.30 0.1875
DV100..
AD3/P 9.06 9.45 3.15 5.12 6.89 5.91 9.06 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..
DT71D
AD2/P DT80.. 7.68 7.09 2.56 4.92 6.50 5.71 7.87 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
F..67 DT90.. 6.30 0.1875
DV100..
AD3/P 9.06 9.45 3.15 5.12 6.89 6.10 9.06 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..
DT71D
AD2/P DT80.. 7.68 7.09 2.56 5.71 7.87 6.69 7.87 4.57 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
DT90.. 0.1875
F..77 7.87
DV100..
AD3/P 9.06 9.45 3.15 5.91 9.06 6.89 9.06 5.94 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..
AD4/P DV132.. 13.58 11.46 4.49 6.10 8.27 7.28 8.27 8.82 3.11 1.375 3.14 0.35 2.76 1.51 0.3125 1/2 - 13 x 1.12
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
VK QD
AF FV
270˚
FV
DHmax
0˚ FP FO FZ
DHmin
FU
FY
FU
PC
min
DMmax 180˚ FM TAP
DG
CC
VK AF PC DG DH DH DM DM CC QD FU FV FO FP FY FZ FM TAP
min max min max
DT71D
AD2/P DT80.. 7.68 7.09 2.56 6.69 10.24 8.07 10.24 4.37 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
DT90..
DV100..
F..87 AD3/P 9.06 9.45 9.84 3.54 6.89 9.06 8.27 12.60 6.14 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112..
AD4/P DV132.. 13.58 11.46 4.49 7.09 11.02 8.46 11.02 8.62 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
DV160.. 2.76
AD5/P 16.93 13.98 6.02 7.28 9.84 8.86 12.80 11.50 4.45 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
DV180..
DV100..
AD3/P 9.06 9.45 3.54 8.07 12.60 9.45 12.60 5.94 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112..
F..97 AD4/P DV132.. 13.58 11.46 11.81 4.49 8.27 11.02 9.65 11.02 8.43 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
DV160.. 2.76
AD5/P 16.93 13.98 6.02 8.46 12.80 9.84 12.80 11.30 4.45 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
DV180..
DV100..
AD3/P 9.06 9.45 3.54 9.06 12.60 10.63 12.60 5.71 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112..
AD4/P DV132.. 13.58 11.46 4.49 11.02 10.83 14.17 8.19 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
F..107 DV160.. 13.78 9.45 2.76
AD5/P 16.93 13.98 6.02 12.80 11.02 12.80 11.06 4.45 1.625 0.58 1.79 0.375
DV180..
4.33 5/8 - 11 x 1.38
DV200..
AD6/P 19.49 17.99 6.42 9.65 12.20 9.84 12.20 12.64 4.49 1.875 0.64 3.15 2.09 0.50
DV225..
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
VK QD
AF FV
270˚
FV
DHmax
0˚ FP FO FZ
DHmin
FU
FY
FU
PC
min
DMmax 180˚ FM TAP
DG
CC
VK AF PC DH DH DM DM CC
DG min QD FU FV FO FP FY FZ FM TAP
max min max
AD4/P DV132.. 13.58 11.46 4.49 9.45 11.02 12.20 14.17 7.60 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
DV160.. 2.76
AD5/P 16.93 13.98 6.02 15.94 12.60 15.94 10.47 4.45 1.625 0.58 1.79 0.375
DV180..
11.61 5/8 - 11 x 1.38
F..127 DV200.. 17.72
AD6/P 19.49 17.99 6.42 14.17 14.17 12.05 4.49 1.875 4.33 3.15 2.09
DV225..
12.20 0.64 0.50
D250..
AD7/P 25.59 22.44 6.69 11.81 14.37 14.37 11.81 4.41 2.125 3.54 2.35 3/4 - 10 x 1.61
D280..
DV160..
AD5/P 16.93 13.98 6.02 13.58 15.94 14.57 15.94 10.16 4.45 1.625 0.58 2.76 1.79 0.375
DV180..
5/8 - 11 x 1.38
DV200..
F..157 AD6/P 19.49 17.99 21.65 6.42 14.96 11.73 4.49 1.875 4.33 3.15 2.09
DV225..
14.76 18.70 18.70 0.64 0.50
D250..
AD7/P 25.59 22.44 6.69 15.16 11.50 4.41 2.125 3.54 2.35 3/4 - 10 x 1.61
D280..
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
*
*
+0
-0.007
Dimensions
Bore sizes Symmetrical Non symmetrical
Model D D
mm inch AM EH ES AM EH ES
FT 37 30 1 1.1875 1.25 1.59 7.60 7.93 0.65 6.65 6.99
FT 47 35 1.1875 1.25 1.375 1.4375 1.73 9.09 9.29 0.75 8.11 8.31
FT 57 40 1.375 1.4375 1.5 1.625 2.07 10.33 10.53 0.81 9.07 9.27
FT 67 40 1.375 1.4375 1.5 1.625 2.05 10.85 11.06 0.81 9.59 9.80
FT 77 50 1.625 1.75 1.9375 2 2.66 13.21 13.56 0.93 11.48 11.83
FT 87 65 1.9375 2 2.375 2.4375 3.11 15.24 15.55 1.02 13.15 13.46
FT 97 75 2.4375 2.75 2.9375 3.23 17.76 18.07 1.02 15.55 15.87
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
ZE
K37.. C AM56-145
2.48 -0.02 5.47 4.33 4.33
BF1
GA1 Z
Ø 4.72
Ø 1.000*
.63 2.36
Z FY
FZ
1.46
5.91
4.53
BD1
AK1
6.50
AJ
3.94 -0.02
FU
.33
Ø .43
BB1
1.26
1.50 3.94 2.36
AA
1.10 4.72
4.33
5.63 1.97
.25 1.31 .32
1.11
Ø 1.000*
3/8 - 16 x 0.87
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .35 Z .14
Ø 4.72
5.47 GA1
Z FY
Ø 4.33*
Ø 6.30
Ø5
FZ
1 .12
BD1
AK1
6.46
AJ
3.94
Ø 1.000*
.33
FU
L
BB1
2.26 5.28
AA
1.97
.25 1.31 .32
1.11
Ø 1.000*
3/8 - 16 x 0.87
Ø 6.30
Ø 6.30
Ø 6.30
Ø 2.95
Ø 1.46 +0.004
.25 2.36 2.36 3.39 2.36 2.36 2.36
1.22 .79 .98
Ø 1.77
Ø 1.77
1.37
Ø 30*
Ø 1.300 -0.001
Ø 1.250*
Ø 30*
.71 .71
7/16 - 14 x 1 .67 .98
Ø 30*
Ø 1.65 min
Ø .108
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
C
AM56-145 ZE
8.27
BF1
GA1 Z
Ø 4.72
5.47
Z FY
K..37/T
FZ
1
BD1
AK1
AJ
6.46
3.94 -0.02
5.51- 0.03
+0.01
FU
.33
L .93
BB1
3.82
AA
5.79
R .89
.79
M10
.16
.79
M8
1.42 - 0.01
Ø .409 ±0.004
.47
Ø
3.7
x
0
3.94
2.36
1.38 3.23 1.22 .79
+ 0.004
.25 2.36 2.36 3.39 2.36 2.36 2.36
Ø 1.46
1.22 .79 .98
1.37
Ø 1.77
Ø 1.77
Ø 30*
Ø 1.300 - 0.001
Ø 1.250*
Ø 30*
.71 .71
7/16 - 14 x 1 .67 .98
Ø 30*
Ø 1.65 min
Ø .108
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
5.47
Z
Ø 3.15*
Ø 4.72
GA1
Z FY
Ø 4.33
FZ
BD1
1
AK1
6.46
AJ
3.94
FU
.33
L
Y
3.82 BB1
AA
5.79 Y
Ø 3.15*
3.7
0 .35
Ø .35
M8
.12
.45
.47
KAZ37.. 2.48 2.36 .35 KHZ37.. 3.74 2.36 .35 KVZ37.. 2.44 2.36 .35
Ø 2.95
+ 0.004
.25 2.36 2.36 3.39 2.36 2.36 2.36
Ø 1.46
1.22 .79 .98
Ø 1.77
Ø 1.77
1.37
Ø 30*
Ø 1.300 - 0.001
Ø 30*
Ø 1.250*
.71 .71
Ø 30*
Ø 1.65 min
Ø .108
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
K47.. C AM56-145 ZE
2.80 -0.02 6.54
BF1
5.32 5.32
GA1 Z
Ø 6.30
.71 2.83
Ø 1.250*
Z FY
FZ
1.46
6.69
BD1
AK1
5.12
1
7.28
AJ
4.41 - 0.02
.28
FU
L
Ø .43
BB1
1.46
1.26 4.72 2.95
AA
1.38 5.71
5.12
2.36
6.38
.25 1.69 .26
1.36
Ø 1.250*
1/2 - 13 x 1.12
+ 0.004
.31 2.95 2.95 4.02 2.95 2.95 2.95
Ø 1.46
1.26 .79 1.26
Ø 1.97
Ø 1.97
1.52
Ø 1.532 - 0.001
Ø 35*
Ø 1.375*
Ø 35*
.71 .71
Ø 35*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z 5.32 5.32
Ø 6.30
.71 2.83
Ø 1.250*
Z FY
FZ
AK1
BD1
1.46
6.69
5.12
1
7.28
AJ
4.41 - 0.02
.28
FU
L
Ø .43
BB1
1.46
1.26 4.72 2.95
AA
1.38 5.71
5.12
2.36
6.38
.25 1.69 .26
1.36
Ø 1.250*
1/2 - 13 x 1.12
+ 0.004
.31 2.95 2.95 4.02 2.95 2.95 2.95
Ø 1.46
1.26 .79 1.26
Ø 1.97
Ø 1.97
1.52
Ø 1.532 - 0.001
Ø 35*
Ø 1.375*
Ø 35*
.71 .71
Ø 35*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .43 6.54 GA1
Z .14
Ø 6.30
Z FY
Ø 5.12*
Ø 7.87
Ø6
FZ
1 .50
BD1
AK1
7.28
AJ
4.41
Ø 1.250*
.28
FU
L
BB1
2.83 6.30
AA
2.36
.25 1.69 .26
1.36
Ø 1.250*
1/2 - 13 x 1.12
KAF47.. 3.07 2.95 .98 KHF47.. 3.94 2.95 .98 KVF47.. 3.03 2.95 .98
Ø 3.27
Ø 7.87
Ø 7.87
Ø 7.87
+ 0.004
.31 2.95 2.95 4.02 2.95 2.95 2.95
Ø 1.46
1.26 .79 1.26
Ø 1.97
Ø 1.97
1.52
Ø 1.532 - 0.001
Ø 35*
Ø 1.375*
Ø 35*
.71 .71
Ø 35*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .43 6.54 GA1
Z .14
Ø 6.30
Z FY
Ø 5.12*
Ø 7.87
Ø6
FZ
.50
AK1
BD1
1
7.28
AJ
4.41
Ø 1.250*
.28
FU
L
1.36
Ø 1.250*
1/2 - 13 x 1.12
KAF47.. 3.07 2.95 .98 KHF47.. 3.94 2.95 .98 KVF47.. 3.03 2.95 .98
Ø 3.27
Ø 7.87
Ø 7.87
Ø 7.87
+ 0.004
.31 2.95 2.95 4.02 2.95 2.95 2.95
Ø 1.46
1.26 .79 1.26
Ø 1.97
Ø 1.97
1.52
Ø 1.532 - 0.001
Ø 35*
Ø 1.375*
Ø 35*
.71 .71
Ø 35*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
6.54
Ø 6.30
Z FY
K..47/T
FZ
BD1
AK1
1
AJ
7.28
4.41 -0.02
6.30- 0.03
+0.01
FU
.33
L 1.18
BB1
4.53
AA
89
˚
6.69
55
R.
.79
.16
.79
M8
1.42 - 0.01
Ø .409 ±0.004
.47
x
2.76
4.33
2
Ø 4.0
+ 0.004
.31 2.95 2.95 4.02 2.95 2.95 2.95
Ø 1.46
1.26 .79 1.26
Ø 1.97
Ø 1.97
1.52
Ø 1.532 - 0.001
Ø 35*
Ø 1.375*
Ø 35*
.71 .71
Ø 35*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
Ø 6.30
6.54
Z FY
K..47/T
FZ
AK1
BD1
1
AJ
7.28
4.41 -0.02
6.30- 0.03
+0.01
FU
.33
L 1.18
4.53 BB1
AA
89
˚
6.69
55
R.
.79
.16
.79
M8 ISO 4017
M10x30-8.8
1.42 - 0.01
Ø .409 ±0.004
.47
x
2.76
4.33
2
Ø 4.0
+ 0.004
.31 2.95 2.95 4.02 2.95 2.95 2.95
Ø 1.46
1.26 .79 1.26
Ø 1.97
Ø 1.97
1.52
Ø 1.532 - 0.001
Ø 35*
Ø 1.375*
Ø 35*
.71 .71
Ø 35*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
Ø 3.15*
GA1
Ø 6.30
6.54
Z FY
Ø 4.72
FZ
BD1
AK1
1
7.28
AJ
4.41
FU
.28
L
Y
BB1
4.53
AA
6.69 Y
Ø 3.15*
.33
Ø .35
2
Ø 4.0
M8
.12
.43
.47
KAZ47.. 3.07 2.95 .31 KHZ47.. 3.94 2.95 .31 KVZ47.. 3.03 2.95 .31
Ø 3.27
+ 0.004
.31 2.95 2.95 4.02 2.95 2.95 2.95
Ø 1.46
1.26 .79 1.26
Ø 1.97
Ø 1.97
1.52
Ø 1.532 - 0.001
Ø 35*
Ø 1.375*
Ø 35*
.71 .71
Ø 35*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
9.57
Z
Ø 3.15*
GA1
Ø 6.30
6.54
Z FY
Ø 4.72
FZ
BD1
AK1
1
7.28
AJ
4.41
FU
.28
L
Y
4.53 BB1
6.69 AA
Y
Ø 3.15*
.33
Ø .35
2
Ø 4.0
M8
.12
.43
.47
KAZ47.. 3.07 2.95 .31 KHZ47.. 3.94 2.95 .31 KVZ47.. 3.03 2.95 .31
Ø 3.27
+ 0.004
.31 2.95 2.95 4.02 2.95 2.95 2.95
Ø 1.46
1.26 .79 1.26
Ø 1.97
Ø 1.97
1.52
Ø 1.532 - 0.001
Ø 35*
Ø 1.375*
Ø 35*
.71 .71
Ø 35*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
K57.. C AM56-145 ZE
3.15 -0.02 6.81
BF1
6.02 6.02
GA1 Z
Ø 6.30
.83 3.15
Ø 1.375*
Z FY
FZ
1.69
7.48
BD1
AK1
1
5.91
AJ
8.54
5.20 - 0.02
.52
FU
L
Ø .53
BB1
1.77
1.57 5.12 3.46
AA
1.18 6.18
5.12
2.76
6.77
.31 1.81 .43
1.51
Ø 1.375*
1/2 - 13 x 1.12
+ 0.004
.38 3.27 3.27 4.41 3.27 3.27 3.27
Ø 1.46
1.02 .79 1.26
Ø 2.17
Ø 2.17
1.67
Ø 40*
Ø 1.532 - 0.001
Ø 40*
Ø 1.500*
.71 .71
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
6.81
GA1
Z 6.02 6.02
Ø 6.30
.83 3.15
Ø 1.375*
Z FY
FZ
AK1
BD1
1.69
7.48
5.91
1
8.54
AJ
5.20 - 0.02
.52
FU
L
Ø .53
BB1
1.77
1.57 5.12 3.46
AA
1.18 6.18
5.12
2.76
6.77
.31 1.81 .43
1.51
Ø 1.375*
1/2 - 13 x 1.12
+ 0.004
.38 3.27 3.27 4.41 3.27 3.27 3.27
Ø 1.46
1.02 .79 1.26
Ø 2.17
Ø 2.17
1.67
Ø 40*
Ø 1.532 - 0.001
Ø 40*
Ø 1.500*
.71 .71
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .53 6.81 GA1 Z .16
Ø 6.30
Z FY
Ø 7.09*
Ø 9.84
Ø8
FZ
1 .46
BD1
AK1
8.46
AJ
Ø 1.375*
5.20
.52
FU
L
BB1
3.15 6.95
AA
2.76
.31 1.81 .43
1.51
Ø 1.375*
1/2 - 13 x 1.12
KAF57.. 3.39 3.27 .93 KHF57.. 4.61 3.27 .93 KVF57.. 3.39 3.27 .93
Ø 3.27
Ø 9.84
Ø 9.84
Ø 9.84
+ 0.004
.38 3.27 3.27 4.41 3.27 3.27 3.27
Ø 1.46
1.02 .79 1.26
Ø 2.17
Ø 2.17
1.67
Ø 1.532 - 0.001
Ø 40*
Ø 40*
Ø 1.500*
.71 .71
Ø 40*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .53
Z .16
6.81 GA1
Ø 6.30
Z FY
Ø 7.09*
Ø 9.84
FZ
Ø8
.46
AK1
BD1
1
8.46
AJ
Ø 1.375*
5.20
.52
FU
L
1.51
Ø 1.375*
1/2 - 13 x 1.12
KAF57.. 3.39 3.27 .93 KHF57.. 4.61 3.27 .93 KVF57.. 3.39 3.27 .93
Ø 3.27
Ø 9.84
Ø 9.84
Ø 9.84
+ 0.004
.38 3.27 3.27 4.41 3.27 3.27 3.27
Ø 1.46
1.02 .79 1.26
Ø 2.17
Ø 2.17
1.67
Ø 1.532 - 0.001
Ø 40*
Ø 40*
Ø 1.500*
.71 .71
Ø 40*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
6.81
Ø 6.30
Z FY
K..57/T
FZ
1
BD1
AK1
AJ
8.46
5.20 -0.02
+ 0.01
7.56 - 0.03
FU
.52
L 1.57
BB1
4.72
AA
˚
1.1
55
7.17
M12
.98
.20
.71
R
M12
2.36 - 0.01
Ø .646 ±0.003
.79
x
3.46
4.80
.92
Ø4
+ 0.004
.38 3.27 3.27 4.41 3.27 3.27 3.27
Ø 1.46
1.02 .79 1.26
Ø 2.17
Ø 2.17
1.67
Ø 40*
Ø 1.532 - 0.001
Ø 40*
Ø 1.500*
.71 .71
Ø 40*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
6.81
Ø 6.30
Z FY
K..57/T
FZ
AK1
BD1
1
AJ
8.46
5.20 -0.02
+ 0.01
7.56 - 0.03
FU
.52
L 1.57
BB1
4.72
AA
.14
˚
7.17
55
R1
M12
.98
.20
.71
M12
2.36 - 0.01
Ø .646 ±0.003
.79
x
3.46
4.80
.92
Ø4
+ 0.004
.38 3.27 3.27 4.41 3.27 3.27 3.27
Ø 1.46
1.02 .79 1.26
Ø 2.17
Ø 2.17
1.67
Ø 40*
Ø 1.532 - 0.001
Ø 40*
Ø 1.500*
.71 .71
Ø 40*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
Ø 4.13*
GA1
Ø 6.30
6.81
Z FY
Ø 6.10
FZ
BD1
AK1
1
8.46
AJ
5.20
FU
.52
L
Y
BB1
4.72
AA
7.17 Y
Ø 4.13*
.35
Ø .53
.92
Ø4
M12
.14
.47
.79
KAZ57.. 3.39 3.27 .35 KHZ57.. 4.61 3.27 .35 KVZ57.. 3.39 3.27 .35
Ø 3.27
+ 0.004
.38 3.27 3.27 4.41 3.27 3.27 3.27
Ø 1.46
1.02 .79 1.26
Ø 2.17
Ø 2.17
1.67
Ø 1.532 - 0.001
Ø 40*
Ø 1.500*
Ø 40*
.71 .71
Ø 40*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
10.59
Z
Ø 4.13*
GA1
6.81
Ø 6.30
Z FY
Ø 6.10
FZ
AK1
BD1
1
8.46
AJ
5.20
FU
.52
L
Y
4.72 BB1
7.17 AA
Y
Ø 4.13*
.35
Ø .53
.92
Ø4
M12
.14
.47
.79
KAZ57.. 3.39 3.27 .35 KHZ57.. 4.61 3.27 .35 KVZ57.. 3.39 3.27 .35
Ø 3.27
+ 0.004
.38 3.27 3.27 4.41 3.27 3.27 3.27
Ø 1.46
1.02 .79 1.26
Ø 2.17
Ø 2.17
1.67
Ø 1.532 - 0.001
Ø 40*
Ø 1.500*
Ø 40*
.71 .71
Ø 40*
Ø 1.65 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
K67.. C AM56-145 ZE
3.54 -0.02 7.05
BF1
6.73 6.73
GA1 Z
Ø 6.30
.94 3.41
Ø 1.625*
Z FY
FZ
1.69
7.99
BD1
AK1
1
6.30
AJ
8.98
5.51 - 0.02
.79
FU
L
Ø .53
BB1
1.77
1.77 5.51 3.98
AA
1.18 6.69
4.72
3.15
6.69
.38 2.25 .38
1.79
Ø 1.625*
5/8 - 11 x 1.38
+ 0.004
.38 3.54 3.54 4.65 3.54 3.54 3.54
Ø 1.85
1.50 .79 1.65
Ø 2.17
Ø 2.17
1.67
Ø 40*
Ø 1.923 - 0.001
Ø 40*
Ø 1.500*
.98 .98
Ø 2.05 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
7.05
GA1
Z 6.73 6.73
Ø 6.30
.94 3.41
Ø 1.625*
Z FY
FZ
AK1
BD1
1.69
7.99
1
6.30
8.98
AJ
5.51 - 0.02
.79
FU
L
Ø .53
BB1
1.77
1.77 5.51 3.98
AA
1.18 6.69
4.72
3.15
6.69
.38 2.25 .38
1.79
Ø 1.625*
5/8 - 11 x 1.38
+ 0.004
.38 3.54 3.54 4.65 3.54 3.54 3.54
Ø 1.85
1.50 .79 1.65
Ø 2.17
Ø 2.17
1.67
Ø 40*
Ø 1.923 - 0.001
Ø 40*
Ø 1.500*
.98 .98
Ø 2.05 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .53 7.05 GA1 Z .16
Ø 6.30
Z FY
Ø 7.09*
Ø 9.84
Ø8
FZ
1 .46
BD1
AK1
8.90
AJ
Ø 1.625*
5.51
.79
FU
L
BB1
3.41 7.60
AA
3.15
.38 2.25 .38
1.79
Ø 1.625*
5/8 - 11 x 1.38
KAF67.. 3.70 3.54 .91 KHF67.. 4.96 3.54 .91 KVF67.. 3.54 3.54 .91
Ø 3.66
Ø 9.84
Ø 9.84
Ø 9.84
+ 0.004
.38 3.54 3.54 4.65 3.54 3.54 3.54
Ø 1.85
1.50 .79 1.65
Ø 2.17
Ø 2.17
1.67
Ø 1.923 - 0.001
Ø 40*
Ø 40*
Ø 1.500*
.98 .98
Ø 40*
Ø 2.05 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .53
Z .16
7.05 GA1
Ø 6.30
Z FY
Ø 7.09*
Ø 9.84
FZ
Ø8
.46
AK1
BD1
1
8.90
AJ
Ø 1.625*
5.51
FU
.79
L
1.79
Ø 1.625*
5/8 - 11 x 1.38
KAF67.. 3.70 3.54 .91 KHF67.. 4.96 3.54 .91 KVF67.. 3.54 3.54 .91
Ø 3.66
Ø 9.84
Ø 9.84
Ø 9.84
+ 0.004
.38 3.54 3.54 4.65 3.54 3.54 3.54
Ø 1.85
1.50 .79 1.65
Ø 2.17
Ø 2.17
1.67
Ø 1.923 - 0.001
Ø 40*
Ø 40*
Ø 1.500*
.98 .98
Ø 40*
Ø 2.05 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
7.05
Ø 6.30
Z FY
K..67/T
FZ
1
BD1
AK1
AJ
8.90
5.51 -0.02
+ 0.01
7.87 - 0.03
FU
.79
L 1.77
BB1
4.92
AA
˚
1.1
7.17
55
M12
.98
.20
.98
R
M12
2.36 - 0.01
Ø .646 ±0.003
.79
x
3.46
5.12
.92
Ø4
+ 0.004
.38 3.54 3.54 4.65 3.54 3.54 3.54
Ø 1.85
1.50 .79 1.65
Ø 2.17
Ø 2.17
1.67
Ø 1.923 - 0.001
Ø 40*
Ø 40*
Ø 1.500*
.98 .98
Ø 40*
Ø 2.05 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
7.05
Ø 6.30
Z FY
K..67/T
FZ
AK1
BD1
1
AJ
8.90
5.51 -0.02
+ 0.01
7.87 - 0.03
FU
.79
L 1.77
BB1
4.92
AA
˚
1.1
7.17
55
M12
.98
.20
.98
R
M12
2.36 - 0.01
Ø .646 ±0.003
.79
x
3.46
5.12
.92
Ø4
+ 0.004
.38 3.54 3.54 4.65 3.54 3.54 3.54
Ø 1.85
1.50 .79 1.65
Ø 2.17
Ø 2.17
1.67
Ø 1.923 - 0.001
Ø 40*
Ø 40*
Ø 1.500*
.98 .98
Ø 40*
Ø 2.05 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
Ø 4.13*
GA1
Ø 6.30
7.05
Z FY
Ø 6.10
FZ
BD1
AK1
1
8.90
AJ
5.51
FU
.79
L
Y
4.92 BB1
AA
7.17 Y
Ø 4.13*
.35
Ø .53
.92
Ø4
M12
.14
.47
.79
KAZ67.. 3.70 3.54 .33 KHZ67.. 4.96 3.54 .33 KVZ67.. 3.54 3.54 .33
Ø 3.66
+ 0.004
.38 3.54 3.54 4.65 3.54 3.54 3.54
Ø 1.85
1.50 .79 1.65
Ø 2.17
Ø 2.17
1.67
Ø 1.923 - 0.001
Ø 40*
Ø 1.500*
Ø 40*
.98 .98
Ø 40*
Ø 2.05 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
Ø 4.13*
GA1
Ø 6.30
7.05
Z FY
Ø 6.10
FZ
AK1
BD1
1
8.90
AJ
5.51
FU
.79
L
Y
4.92 BB1
7.17 AA
Y
Ø 4.13*
.35
Ø .53
.92
Ø4
M12
.14
.47
.79
KAZ67.. 3.70 3.54 .33 KHZ67.. 4.96 3.54 .33 KVZ67.. 3.54 3.54 .33
Ø 3.66
+ 0.004
.38 3.54 3.54 4.65 3.54 3.54 3.54
Ø 1.85
1.50 .79 1.65
Ø 2.17
Ø 2.17
1.67
Ø 1.923 - 0.001
Ø 40*
Ø 1.500*
Ø 40*
.98 .98
Ø 40*
Ø 2.05 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
K77.. C AM56-145 ZE
4.41 -0.02 7.95
BF1
8.11 8.11
GA1 Z
Ø 7.87
1.06 3.98
Ø 2.000*
Z FY
FZ
10.35
11.34
2.17
BD1
AK1
1
7.87
AJ
7.09 - 0.02
1.23
FU
L
Ø .69
BB1
2.17
2.17 6.50 4.86
AA
1.57 7.87
5.91
3.94
8.19
.50 2.63 .64
Ø 2.000*
2.22
3/4 - 10 x 1.61
+ 0.004
.50 4.13 4.13 5.35 4.13 4.13 4.13
Ø 2.17
1.42 1.18 2.05
Ø 2.76
Ø 2.76
2.22
Ø 50*
Ø 2.131 - 0.001
Ø 50*
Ø 2.000*
.91 .91
Ø 2.44 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
7.95
GA1
Z 8.11 8.11
Ø 7.87
1.06 3.98
Ø 2.000*
Z FY
FZ
10.35
AK1
11.34
BD1
2.17
1
7.87
AJ
7.09 - 0.02
1.23
FU
L
Ø .69
BB1
2.17
2.17 6.50 4.86
AA
1.57 7.87
5.91
3.94
8.19
.50 2.63 .64
Ø 2.000*
2.22
3/4 - 10 x 1.61
+ 0.004
.50 4.13 4.13 5.35 4.13 4.13 4.13
Ø 2.17
1.42 1.18 2.05
Ø 2.76
Ø 2.76
2.22
Ø 50*
Ø 2.131 - 0.001
Ø 50*
Ø 2.000*
.91 .91
Ø 2.44 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .53 7.95 GA1 Z .16
Ø 7.87
Z FY
Ø 11.81
Ø 9.06*
Ø1
FZ
0.43
1
BD1
AK1
11.26
AJ
1.23
Ø 2.000*
7.09
FU
L
BB1
3.98 9.53
AA
3.94
.50 2.63 .64
2.22
Ø 2.000*
3/4 - 10 x 1.61
KAF77.. 4.25 4.13 1.46 KHF77.. 5.75 4.13 1.46 KVF77.. 4.13 4.13 1.46
Ø 11.81
Ø 11.81
Ø 11.81
Ø 4.49
+ 0.004
.50 4.13 4.13 5.35 4.13 4.13 4.13
Ø 2.17
1.42 1.18 2.05
Ø 2.76
Ø 2.76
2.22
Ø 2.131 - 0.001
Ø 50*
Ø 50*
Ø 2.000*
.91 .91
Ø 50*
Ø 2.44 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .53
Z .16
7.95 GA1
Ø 7.87
Z FY
Ø 11.81
Ø 9.06*
Ø1
FZ
0.43
AK1
BD1
1
AJ
11.26
1.23
Ø 2.000*
7.09
FU
L
2.22
Ø 2.000*
3/4 - 10 x 1.61
KAF77.. 4.25 4.13 1.46 KHF77.. 5.75 4.13 1.46 KVF77.. 4.13 4.13 1.46
Ø 11.81
Ø 11.81
Ø 11.81
Ø 4.49
+ 0.004
.50 4.13 4.13 5.35 4.13 4.13 4.13
Ø 2.17
1.42 1.18 2.05
Ø 2.76
Ø 2.76
2.22
Ø 2.131 - 0.001
Ø 50*
Ø 50*
Ø 2.000*
.91 .91
Ø 50*
Ø 2.44 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
Ø 7.87
7.95
Z FY
K..77/T
FZ
1
BD1
AK1
11.26
AJ
7.09 -0.02
+ 0.01
9.84 - 0.03
1.23
FU
L 2.07
BB1
5.47
AA
.14
˚
8.03
60
R1
M16
1.26
.24
.98
M12
2.36 - 0.01
Ø .646 ±0.003
.79
x
.59
Ø5
4.02
6.06
1.89 4.80 2.13 .98
+ 0.004
.50 4.13 4.13 5.35 4.13 4.13 4.13
Ø 2.17
1.42 1.18 2.05
Ø 2.76
Ø 2.76
2.22
Ø 2.131 - 0.001
Ø 50*
Ø 50*
Ø 2.000*
.91 .91
Ø 50*
Ø 2.44 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
Ø 7.87
7.95
Z FY
K..77/T
FZ
AK1
11.26
1
BD1
AJ
7.09 -0.02
+ 0.01
9.84 - 0.03
1.23
FU
L 2.07
5.47 BB1
AA
.14
˚
8.03
60
R1
M16
1.26
.24
.98
M12
2.36 - 0.01
Ø .646 ±0.003
.79
x
.59
Ø5
4.02
6.06 1.89 4.80 2.13 .98
+ 0.004
.50 4.13 4.13 5.35 4.13 4.13 4.13
Ø 2.17
1.42 1.18 2.05
Ø 2.76
Ø 2.76
2.22
Ø 2.131 - 0.001
Ø 50*
Ø 50*
Ø 2.000*
.91 .91
Ø 50*
Ø 2.44 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
12.28
Z
Ø 4.92*
GA1
Ø 7.87
7.95
Z FY
Ø 6.69
FZ
11.26
BD1
AK1
1
AJ
7.09
1.23
FU
L
Y
5.47 BB1
AA
8.03 Y
Ø 4.92*
.39
.59
Ø .53
Ø5
M12
.14
.55
.98
KAZ77.. 4.25 4.13 .39 KHZ77.. 5.75 4.13 .39 KVZ77.. 4.13 4.13 .39
Ø 4.49
+ 0.004
.50 4.13 4.13 5.35 4.13 4.13 4.13
Ø 2.17
1.42 1.18 2.05
Ø 2.76
Ø 2.76
2.22
Ø 2.131 - 0.001
Ø 50*
Ø 2.000*
Ø 50*
.91 .91
Ø 50*
Ø 2.44 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
Ø 4.92*
GA1
Ø 7.87
7.95
Z FY
Ø 6.69
FZ
11.26
AK1
BD1
1
AJ
7.09
1.23
FU
L
Y
5.47 BB1
8.03 AA
Y
Ø 4.92*
.39
.59
Ø .53
Ø5
M12
.14
.55
.98
KAZ77.. 4.25 4.13 .39 KHZ77.. 5.75 4.13 .39 KVZ77.. 4.13 4.13 .39
Ø 4.49
+ 0.004
.50 4.13 4.13 5.35 4.13 4.13 4.13
Ø 2.17
1.42 1.18 2.05
Ø 2.76
Ø 2.76
2.22
Ø 2.131 - 0.001
Ø 50*
Ø 2.000*
Ø 50*
.91 .91
Ø 50*
Ø 2.44 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
K87.. C AM56-145 ZE
5.20 -0.02 10.12
BF1
9.45 9.45
GA1 Z
Ø 9.84
1.26 4.57
Ø 2.375*
Z FY
FZ
12.01
2.64
BD1
AK1
1
9.17
AJ
13.39
8.35 - 0.02
1.02
FU
L
Ø .87
BB1
2.76
2.95 7.09 5.91
AA
2.17 9.06
7.09
4.72
10.24
.63 3.63 .51
Ø 2.375*
2.65
3/4 - 10 x 1.61
+ 0.004
.63 4.72 4.72 6.34 4.72 4.72 4.72
Ø 2.83
1.61 1.57 2.44
Ø 3.35
Ø 3.35
2.65
Ø 65*
Ø 2.715 - 0.002
Ø 65*
Ø 2.375*
.98 .98
3/4 - 10 x 2 1.39 2.44
Ø 3.23 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
10.12
GA1
Z 9.45 9.45
Ø 9.84
1.26 4.57
Ø 2.375*
Z FY
FZ
12.01
AK1
BD1
2.64
9.17
1
13.39
AJ
8.35 - 0.02
1.02
FU
L
Ø .87
BB1
2.76
2.95 7.09 5.91
2.17 AA
9.06
7.09
4.72
10.24
.63 3.63 .51
Ø 2.375*
2.65
3/4 - 10 x 1.61
+ 0.004
.63 4.72 4.72 6.34 4.72 4.72 4.72
Ø 2.83
1.61 1.57 2.44
Ø 3.35
Ø 3.35
2.65
Ø 65*
Ø 2.715 - 0.002
Ø 65*
Ø 2.375*
.98 .98
3/4 - 10 x 2 1.39 2.44
Ø 3.23 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .69 10.12 GA1
Z .20
Ø 9.84
Z FY
Ø 13.78
Ø 9.84*
Ø1
FZ
1.81
1
BD1
AK1
13.31
AJ
1.02
Ø 2.375*
8.35
FU
L
BB1
5.43 10.63
AA
4.72
.63 3.63 .51
2.65
Ø 2.375*
3/4 - 10 x 1.61
KAF87.. 4.84 4.72 1.18 KHF87.. 6.69 4.72 1.18 KVF87.. 4.72 4.72 1.18
Ø 13.78
Ø 13.78
Ø 13.78
Ø 6.26
+ 0.004
.63 4.72 4.72 6.34 4.72 4.72 4.72
Ø 2.83
1.61 1.57 2.44
Ø 3.35
Ø 3.35
2.65
Ø 2.715 - 0.002
Ø 65*
Ø 65*
Ø 2.375*
.98 .98
Ø 65*
Ø 3.23 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø .69 10.12
Z .20
GA1
Ø 9.84
Z FY
Ø 13.78
Ø 9.84*
Ø1
FZ
1.81
AK1
BD1
1
13.31
AJ
1.02
Ø 2.375*
8.35
FU
L
2.65
Ø 2.375*
3/4 - 10 x 1.61
KAF87.. 4.84 4.72 1.18 KHF87.. 6.69 4.72 1.18 KVF87.. 4.72 4.72 1.18
Ø 13.78
Ø 13.78
Ø 13.78
Ø 6.26
+ 0.004
.63 4.72 4.72 6.34 4.72 4.72 4.72
Ø 2.83
1.61 1.57 2.44
Ø 3.35
Ø 3.35
2.65
Ø 2.715 - 0.002
Ø 65*
Ø 65*
Ø 2.375*
.98 .98
Ø 65*
Ø 3.23 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
10.12
Ø 9.84
Z FY
K..87/T
FZ
13.31
BD1
1
AK1
AJ
8.35 -0.02
+ 0.01
11.81 - 0.03
1.02
FU
L 2.36
BB1
7.48
AA
.61
˚
11.02
60
R1
M16
1.26
.24
1.18
M16
3.15 - 0.01
Ø .984 ±0.003
1.02
x
4.65
6.69
1
7.0
Ø
+ 0.004
.63 4.72 4.72 6.34 4.72 4.72 4.72
Ø 2.83
1.61 1.57 2.44
Ø 3.35
Ø 3.35
2.65
Ø 2.715 - 0.002
Ø 65*
Ø 65*
Ø 2.375*
.98 .98
Ø 65*
Ø 3.23 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
15.35
GA1
Z
10.12
Ø 9.84
Z FY
K..87/T
FZ
AK1
1
BD1
13.31
AJ
8.35 -0.02
+ 0.01
11.81 - 0.03
FU
1.02
L 2.36
7.48 BB1
AA
˚
11.02
1.6
60
M16
1.26
.24
1.18
R
M16
3.15 - 0.01
Ø .984 ±0.003
1.02
x
4.65
6.69
1
7.0
Ø
+ 0.004
.63 4.72 4.72 6.34 4.72 4.72 4.72
Ø 2.83
1.61 1.57 2.44
Ø 3.35
Ø 3.35
2.65
Ø 2.715 - 0.002
Ø 65*
Ø 65*
Ø 2.375*
.98 .98
Ø 65*
Ø 3.23 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
Ø 6.10*
10.12 GA1
Ø 9.84
Z FY
Ø 8.46
FZ
BD1
AK1
13.31
1
AJ
8.35
1.02
FU
L
Y
BB1
7.48
AA
11.02 Y
Ø 6.10*
.43
Ø .69
1
7.0
Ø
M16
.16
.59
1.02
KAZ87.. 4.84 4.72 .43 KHZ87.. 6.69 4.72 .43 KVZ87.. 4.72 4.72 .43
Ø 6.26
+ 0.004
.63 4.72 4.72 6.34 4.72 4.72 4.72
Ø 2.83
1.61 1.57 2.44
Ø 3.35
Ø 3.35
2.65
Ø 2.715 - 0.002
Ø 65*
Ø 65*
Ø 2.375*
.98 .98
Ø 65*
Ø 3.23 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
Ø 6.10*
GA1
10.12
Ø 9.84
Z FY
Ø 8.46
FZ
AK1
BD1
13.31
1
AJ
8.35
1.02
FU
L
Y
7.48 BB1
AA
11.02 Y
Ø 6.10*
.43
Ø .69
1
7.0
Ø
M16
.16
.59
1.02
KAZ87.. 4.84 4.72 .43 KHZ87.. 6.69 4.72 .43 KVZ87.. 4.72 4.72 .43
Ø 6.26
+ 0.004
.63 4.72 4.72 6.34 4.72 4.72 4.72
Ø 2.83
1.61 1.57 2.44
Ø 3.35
Ø 3.35
2.65
Ø 2.715 - 0.002
Ø 65*
Ø 65*
Ø 2.375*
.98 .98
Ø 65*
Ø 3.23 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
10.91
GA1
Z
Ø 11.81
5.75
Ø 2.875*
1.42
Z FY
FZ
11.61
AK1
14.65
3.23
BD1
10.43 - 0.004
16.42
1
AJ
1.27
FU
L
Ø 1.02
2.95
2.36 BB1 9.45 6.73
AA
2.95 11.41
9.45
5.51
11.57
.75 4.13 .67
3.20
Ø 2.875*
3/4 - 10 x 1.61
+ 0.004
.63 5.91 5.91 7.68 5.91 5.91 5.91
Ø 2.83
2.17 1.97 2.83
3.03
Ø 3.74
Ø 3.74
Ø 2.919- 0.002
*
*
Ø 2.750*
.98 .98
3/4 - 10 x 2 1.24 2.83
Ø 3.54 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
KF97.. C AM182-365 ZE
17.13 .87 5.51
BF1
Ø .69 Z
Ø 11.81
10.91 GA1 .20
Z FY
Ø 13.78*
Ø 17.72
Ø1
FZ
5.7
AK1
BD1
16.30
1 5
AJ
10.43
1.27
Ø 2.875*
FU
L
BB1 6.73 13.07
AA
5.51
.75 4.92 .67
3.20
Ø 2.875*
3/4 - 10 x 1.61
KAF97.. 6.02 5.91 1.63 KHF97.. 8.11 5.91 1.63 KVF97.. 5.91 5.91 1.63
Ø 17.72
Ø 17.72
Ø 17.72
Ø 6.85
+ 0.004
.63 5.91 5.91 7.68 5.91 5.91 5.91
Ø 2.83
2.17 1.97 2.83
3.03
Ø 3.74
Ø 3.74
Ø 2.943 - 0.002
*
Ø 2.750*
* .98
.98
* *
Ø 3.54
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
Ø 11.81
10.91
Z FY
K..97/T
FZ
AK1
1
BD1
16.30
AJ
10.43 -0.04
+ 0.01
- 0.05
1.27
FU
L 2.76
13.78
BB1
10.44 -0.04
7.48
.67
AA
.61
˚
11.73
50
1.42
M20
.24
R1
1.58
M16
3.94 - 0.01
Ø .984 ±0.003
1.02
x
6.30
8.90
Ø 8.66
+ 0.004
.63 5.91 5.91 7.68 5.91 5.91 5.91
Ø 2.83
2.17 1.97 2.83
Ø 3.74
Ø 3.74
3.03
Ø 2.919 - 0.002
Ø 75*
Ø 75*
Ø 2.750*
.98 .98
Ø 75*
Ø 3.54 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
Ø 7.09*
GA1
Ø 11.81
10.91
Z FY
Ø 10.24
FZ
AK1
BD1
16.30
1
AJ
10.43
1.27
FU
L
Y
7.48 BB1
11.73 AA
Y
Ø 7.09*
.55
Ø .69
Ø 8.66
M16
.16
.71
1.02
KAZ97.. 6.02 5.91 .55 KHZ97.. 8.11 5.91 .55 KVZ97.. 5.91 5.91 .55
Ø 6.85
+ 0.004
.63 5.91 5.91 7.68 5.91 5.91 5.91
Ø 2.83
2.17 1.97 2.83
Ø 3.74
Ø 3.74
3.03
Ø 2.919 - 0.002
Ø 75*
Ø 75*
Ø 2.750*
.98 .98
Ø 75*
Ø 3.54 min
Ø .16
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
13.43
GA1
Z
Ø 13.78
6.89
Ø 3.625 *
1.58
Z FY
FZ
14.17
AK1
17.64
3.86
BD1
19.80
1
12.40 - 0.04
AJ
2.05
FU
L
Ø 1.30
3.74
3.94 BB1 10.63 8.35
AA
3.74 13.39
11.02
6.69
14.96
.88 5.38 .63
4.01
Ø 3.625*
1 - 8 x 2.13
+ 0.004
.88 6.89 6.89 9.06 6.89 6.89 6.89
Ø 3.54
2.56 2.36 3.50
3.89
Ø 4.65
Ø 4.65
Ø 95*
Ø 3.582- 0.002
Ø 95*
Ø 3.625*
1.02 1.02
3/4 - 10 x 2 1.24 3.50
Ø 95*
Ø 4.13 min
Ø .24
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
KF107.. C AM182-365 ZE
21.14 .87 6.69
BF1
Ø .69 Z
Ø 13.78
13.43 GA1 .20
Z FY
Ø 13.78*
Ø 17.72
Ø1
FZ
5.7
AK1
BD1
19.69
1 5
AJ
12.40
2.05
Ø 3.625*
FU
L
BB1 6.89 15.20
AA
6.69
.88 5.38 .63
4.01
Ø 3.625*
1 - 8 x 2.13
KAF107.. 7.01 6.89 1.61 KHF107.. 9.65 6.89 1.61 KVF107.. 7.01 6.89 1.61
Ø 17.72
Ø 17.72
Ø 17.72
Ø 7.87
+ 0.004
.88 6.89 6.89 9.06 6.89 6.89 6.89
Ø 3.54
2.56 2.36 3.50
3.89
Ø 4.65
Ø 4.65
Ø 95*
Ø 3.582 - 0.002
Ø 3.625*
Ø 95*
1.02 1.02
Ø 95*
Ø 4.13
Ø .24
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1 Z
Ø 13.78
13.43
Z FY
K..107/T
FZ
AK1
BD1
1
19.69
AJ
12.40 -0.04
+ 0.02
- 0.06
2.05
FU
L 2.91
17.72
12.40 -0.04
9.06 BB1
.79
AA
˚
14.57
55
R 1.6
1.73
M24
.31
1.77
3.94 - 0.01
Ø .984 ±0.003
10.47
7.48
3.94 7.48
3.62 1.77
+ 0.004
.88 6.89 6.89 9.06 6.89 6.89 6.89
Ø 3.54
2.56 2.36 3.50
3.89
Ø 4.65
Ø 4.65
Ø 3.582 - 0.002
Ø 95*
Ø 95*
Ø 3.625*
1.02 1.02
Ø 95*
Ø 4.13 min
Ø .24
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
GA1
Z
Ø 13.78
13.43
Ø 8.27*
Z FY
FZ
Ø 11.97
AK1
BD1
1
AJ
19.69
2.05
FU
12.40
L
9.06 BB1
14.57 AA
Ø 8.27*
.31
Ø .87
Ø 10.24
M20
.16
.87
1.18
+ 0.004
.88 6.89 6.89 9.06 6.89 6.89 6.89
Ø 3.54
2.56 2.36 3.50
Ø 4.6 5
Ø 4.65
3.89
Ø 3.582 - 0.002
Ø 95*
Ø 95*
Ø 3.625*
1.02 1.02
Ø 95*
Ø 4.13 min
Ø .24
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
15.35
GA1
Z
Ø 17.72
7.99
Ø 4.375*
1.77
Z FY
FZ
16.54
AK1
20.71
4.37
BD1
23.31
1
AJ
14.76 - 0.04
2.09
FU
L
Ø 1.54
3.94
3.94 BB1 12.99 9.96
AA
4.53 15.75
13.78
8.27
17.32
1.00 6.00 1.09
4.82
Ø 4.375*
1 - 8 x 2.13
Ø 9.17
3.35 2.76
Ø 5.31
Ø 5.32
Ø 4.000*
Ø 105*
Ø 105*
1 - 8 x 2-1/4 1.26
14.69
3.74 3.15
Ø 105*
Ø 105*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 17.72
Z
Ø 17.72*
Ø 21.65
.69
Ø 19
23.31
1
BD1
AK1
AJ
14.76 - 0.04
Ø 4.375*
2.09
BB1
AA
8.27
ZE 1.00 6.00 1.09
AM182-365
BF1
Z
4.82
FY
Ø 4.375*
FZ
FU 1 - 8 x 2.13
Ø 21.65
Ø 9.17
11.02 8.07
Ø 5.32
4.44
Ø 4.000*
Ø 105*
Ø 105*
1 - 8 x 2-1/4 1.26
14.69 3.74 3.15
Ø 105*
Ø 105*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 17.72
1.77
Z
14.76 - 0.04
0.06
21.65 +- 0.02
2.36
4.37
20.71
16.54
23.31
J1
BD1
AK1
14.76 A
2.09
1.77
65˚
4.33
R
3.94 BB1
.28
2.7
AA
6
17.32
13.78
4.53
Ø 1.54 ZE
AM182-365 4.96 - 0.01
BF1
Z
1.575 ± 0.003
4.33
12.99
15.75
FY
FZ
FU
L .28
Ø 9.17
11.02 8.07
Ø 5.32
1.00 8.07 8.07
3.35 2.76
4.44
Ø 105*
Ø 4.000*
Ø 105*
Ø 5.31
1.26
14.69 3.74 3.15
1 - 8 x 2-1/4
Ø 105*
Ø 105*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Z
Ø 17.72
Ø 9.84*
15.35
Z
FY
Ø 13.78
FZ
BD1
AK1
1
23.31
AJ
2.09
14.76
FU
L
11.34 BB1
17.32 AA
Ø 9.84*
1.81
Ø1
Ø .87
.20
1.18
1.10
Ø 9.17
Ø 105*
Ø 5.32
11.02 8.07
1.00 8.07 8.07 3.35 2.76
4.44
Ø 105*
Ø 4.000*
Ø 5.31
1.26
14.69 3.74 3.15
1 - 8 x 2-1/4
Ø 105*
Ø 105*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
-0.04 16.77
GA1
Z
Ø 21.65
9.84
Ø 4.750*
1.97
Z FY
FZ
24.96
5.12
AK1
19.69
BD1
27.76
1
AJ
-0.04
2.82
FU
17.72
L
Ø 1.54
5.12
3.94 BB1
16.54 9.72
AA
5.51
19.69
14.96
18.90
8.27
.25 6.56 .82
5.29
Ø 4.750*
1 - 8 x 2.13
Ø 12.40
12.99 9.84
Ø 6.10
1.00 9.84 9.84 3.15
3.54
4.95
Ø 125*
Ø 125*
Ø 4.500*
Ø 6.10
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 21.65
Z
Ø 21.65*
Ø 25.98
.62
1 Ø 23
BD1
AK1
27.80
AJ
- 0.04
Ø 4.750*
2.82
17.72
BB1
AA
8.27
1.25 6.56 .82
AM182-365 ZE
BF1
Z
5.29
FY
Ø 4.750*
FZ
1 - 8 x 2.13
FU
L
Ø 12.40
Ø 25.98
12.99 9.84
1.00 9.84 9.84 3.54 3.15
4.95
Ø 6.10
Ø 6.10
Ø 4.500*
Ø 125*
Ø 125*
1.26
1 - 8 x 2-1/4
18.11 3.94 3.54
Ø 125*
Ø 125*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
Ø 21.65
1.97
Z
17.72 - 0.04
0.02
27.56 +- 0.06
1.97
5.12
24.96
27.76
19.69
1
BD1
AK1
AJ
17.72 - 0.04
2.82
1.77
5.12
3.94
R
BB1
.08
2.7
18.90 AA
6
14.96
5.51
Ø 1.54 ZE
AM182-365 4.96 - 0.01
BF1
Z
Ø 1.57 ± 0.003
4.33
16.54
19.69
FY
FZ
FU
L .08
14.57 9.84
KA157.. 9.96 9.84 KH157..
Ø 12.40
12.99 9.84
Ø 6.10
1.00 9.84 9.84
4.95
3.54 3.15
Ø 125*
Ø 125*
Ø 4.500*
Ø 6.10
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
Ø 11.41*
Z
Ø 21.65
16.77
Z
FY
Ø 15.75
FZ
BD1
AK1
1
27.76
AJ
2.82
17.72
FU
L
11.73 BB1
18.90 AA
Ø 11.41*
.55
Ø 1.02
3.39
Ø1
.20
1.10
1.42
Ø 6.10
12.99 9.84
1.00 9.84 9.84 3.54 3.15
4.95
Ø 125*
Ø 125*
Ø 4.500*
Ø 6.10
1.26
18.11 3.94 3.54
1 - 8 x 2-1/4
Ø 125*
Ø 125*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
6.10
8.66
9.84 .87
Ø 21.65
BD1
AK1
30.94
1
AJ
19.69 - 0.04
15.16
17.72
Ø 9.06*
4.53
3.82
Ø 6.250*
1.97
1.97 Ø 1.30 4.09 Ø 1.30
BB1
2.76 8.27
AA
9.84
ZE 1.50 7.13 .59
BF1
Z
6.91
FY
Ø 6.250*
FZ
1-1/8 - 7 x 2.44
FU
L
X 7.87 13.39
Ø 1.30
2.76
22.84
.35
Ø 12.40
Ø 135*
Ø 140*
5.12 3.94
Ø 135*
Ø 140*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
6.10
8.66
Ø 12.40
9.84 .87
Ø 21.65
BD1
AK1
1 30.94
AJ
19.69 - 0.04
15.16
17.72
3.82
4.53
1.97
1.97 Ø 1.30 4.09 Ø 1.30
BB1
2.76 8.27
AA
ZE
BF1
Z
FY
FZ
X
FU
7.87 13.39 L
2.76
Ø 1.30
16.65 12.01
4.80 3.54
Ø 7.09
22.84
Ø 135*
Ø 140*
5.12 3.94
Ø 140 *
Ø 135*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
6.30
9.84
12.01 .20
Ø 21.65
BD1
AK1
37.09
1
AJ
23.62 - 0.04
18.11
21.65
5.91
Ø 10.24*
4.41
Ø 7.500*
1.97
1.97 Ø 1.54 4.33 Ø 1.54
BB1
2.36
AA
9.84 12.60
1.75 10.00 .39
ZE
BF1
Z
8.27
FY
Ø 7.500*
FZ
1-1/8 - 7 x 2.44
FU
L
X 8.47 15.95
Ø 1.54
3.74
25.20
.41
Ø 14.69
Ø 155*
Ø 160*
5.12 4.13
Ø 155*
Ø 160*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
6.3 0
9.84
Ø 14.69
12.01 .20
Ø 21.65
BD1
AK1
1 37.09
AJ
23.62 - 0.04
18.11
21.65
5.91
4.41
1.97
1.97 Ø 1.54 4.33 Ø 1.54
BB1
2.36 9.84
AA
ZE
BF1
Z
FY
FZ
X
FU
8.47 15.95 L
3.74
Ø 1.54
17.91 13.27
4.61 3.74
Ø 7.87
25.20
Ø 155*
Ø 160*
5.12 4.13
Ø 155*
Ø 160*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
ZC
PC
Z FY
FZ
AJ1
AK1
BD1
1
AJ
FU
L
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
ZC
PC
Z FY
FZ
AJ1
AK1
BD1
1
AJ
FU
L
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
FU
FZ
AJ1
AK1
BD2
PC
FU
BD2
ZE
K.. AQH.. ZC
Y BB1
BF1
FU
AK1
AJ1
BD2
PC
FU
BD2 ZE
L
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
FU
FZ
AJ1
AK1
BD2
PC
FU
BD2
ZE
K.. AQH.. ZC
Y BB1
BF1
FU
AK1
AJ1
BD2
PC
FU
BD2 ZE
L
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
FU
FZ
AJ1
AK1
BD2
PC
FU
BD2
ZE
K.. AQH.. ZC
Y BB1
BF1
FU
AK1
AJ1
BD2
PC
FU
BD2 ZE
L
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
Z
LA
K.. AR..
BF1 ZC
Z
WB
FY
FU
FZ
BD1
AK1
AJ1
FU
PC
ZE
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
Z
LA
BF1 ZC
Z
WB
FY
FU
FZ
BD1
AK1
AJ1
FU
PC
ZE
BB1
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
FU
PC
FV
FP FO FZ
FY
FU
CC
AM
K.. AD../ZR
AN
FM TAP
AL*
FU
AE
PC
MA TAP
BF
GC
VD
AL GC AE AN PC CC VD AM BF MA FU FV FO FP FY FZ FM TAP
TAP
AD1 - - - - 4.02 - - - - 0.625 0.70
K..37 4.72 1.57 0.25 1.26 0.1875 1/4 - 20 x 0.63
AD2 , AD2/ZR 2.17 0.53 3.15 0.31 5.12 0.47 1.97 0.35 M8 0.750 0.83
K..47 AD2 , AD2/ZR 2.17 0.53 3.15 4.84 0.47 1.97 0.35 M8 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
K..57 0.31 6.30 0.1875
K..67 AD3 , AD3/ZR 2.76 0.61 4.13 6.26 0.63 2.36 0.43 M10 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
AD2 , AD2/ZR 2.17 0.53 3.15 4.57 0.47 1.97 0.35 M8 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
0.31 0.1875
K..77 AD3 , AD3/ZR 2.76 0.61 4.13 7.87 5.94 0.63 2.36 0.43 M10 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.82 0.79 3.76 0.53 M12 1.375 3.14 0.35 2.76 1.51 0.3125 1/2 - 13 x 1.12
AD2 , AD2/ZR 2.17 0.53 3.15 4.37 0.47 1.97 0.35 M8 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
0.31
AD3 , AD3/ZR 2.76 0.61 4.13 6.14 0.63 2.36 0.43 M10 1.125 2.36 0.32 1.97 1.54 0.25 3/8 - 16 x 0.87
K..87 9.84
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.62 3.76 1.375 3.14 0.35 1.21 0.3125 1/2 - 13 x 1.12
0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 0.43 11.50 4.96 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
AD3 , AD3/ZR 2.76 0.61 4.13 0.31 5.94 0.63 2.36 0.43 M10 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.43 3.76 1.375 3.14 0.35 2.76 1.51 0.3125 1/2 - 13 x 1.12
K..97 11.81 0.79 0.53 M12
AD5 , AD5/ZR 4.72 0.94 7.09 11.30 4.96 1.625 0.58 2.76 1.79 0.375
0.43 4.33 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 12.87 1.02 5.14 0.69 M16 1.875 0.64 3.15 2.09 0.50
AD3 , AD3/ZR 2.76 0.61 4.13 0.31 5.71 0.63 2.36 0.43 M10 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 8.19 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
K..107 13.78 0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 11.06 4.96 1.625 0.58 1.79 0.375
0.43 4.33 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 12.64 1.02 5.14 0.69 M16 1.875 0.64 3.15 2.09 0.50
AD4 , AD4/ZR 3.94 0.63 5.12 0.51 7.60 3.76 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
0.79 0.53 M12 2.76
AD5 , AD5/ZR 4.72 0.94 7.09 10.47 4.96 1.625 0.58 1.79 0.375
0.43 5/8 - 11 x 1.38
K..127 AD6 , AD6/ZR 5.12 0.89 7.87 17.72 12.05 1.02 5.14 0.69 M16 1.875 4.33 3.15 2.09
0.64 0.50
AD7 , AD7/ZR 4.92 0.75 7.48 0.51 11.81 1.18 5.24 0.87 M20 2.125 3.54 2.35
3/4 - 10 x 1.61
AD8 , AD8/ZR 4.72 0.89 8.27 0.20 15.08 0.77 6.10 0.53 M12 2.750 5.51 0.90 4.33 3.03 0.625
AD5 , AD5/ZR 4.72 0.94 7.09 10.16 0.79 4.96 0.53 M12 1.625 0.58 2.76 1.79 0.375
K..157 0.43 5/8 - 11 x 1.38
AD6 , AD6/ZR 5.12 0.89 7.87 11.73 1.02 5.14 0.69 M16 1.875 4.33 3.15 2.09
K..167 21.65 0.64 0.50
K..187 AD7 , AD7/ZR 4.92 0.75 7.48 0.51 11.50 1.18 5.24 0.87 M20 2.125 3.54 2.35
3/4 - 10 x 1.61
AD8 , AD8/ZR 4.72 0.89 8.27 0.20 14.72 0.77 6.10 0.53 M12 2.750 5.51 0.90 4.33 3.03 0.625
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
AF VK QD
max
DH
DH min
FU
0˚
PC
DB
180˚
D
DG
DM max
CC
0˚ 180˚
FV
FZ FP FO
KF..
FY
FU
KAF..
FM TAP
VK AF PC DH DH DM DM
DG min CC QD FU FV FO FP FY FZ FM TAP
max min max
1)
DT71D
1)
K..37 AD2/P DT80.. 7.68 7.09 4.72 2.56 3.94 6.50 3.74 6.50 5.12 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
1)
DT90..
DT71D1)
1)
AD2/P DT80.. 7.68 7.09 2.56 4.33 6.50 4.33 6.50 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
1)
K..47 DT90.. 6.30 0.1875
1), 2)
DV100..
AD3/P 1), 2) 9.06 9.45 3.15 4.92 6.89 4.92 6.89 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..
DT71D
AD2/P DT80.. 7.68 7.09 2.56 4.72 6.50 4.72 6.50 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
K..57 DT90.. 6.30 0.1875
1), 2), 3)
DV100..
AD3/P 9.06 9.45 3.15 5.12 6.89 5.12 6.89 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..1), 2), 3)
DT71D1)
AD2/P DT80..1) 7.68 7.09 2.56 5.12 7.87 4.92 6.50 4.84 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
K..67 DT90..1) 6.30 0.1875
DV100..3)
AD3/P 9.06 9.45 3.15 5.31 6.89 5.12 6.89 6.26 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..3)
DT71D1)
1)
AD2/P DT80.. 7.68 7.09 2.56 10.24 5.51 10.24 4.57 1.69 0.750 1.57 0.25 1.26 0.83 1/4 - 20 x 0.63
1)
DT90.. 6.30 0.1875
K..77 7.87
DV100..1)
AD3/P 1) 9.06 9.45 3.15 9.06 5.71 6.89 5.94 2.13 0.875 1.97 0.29 1.57 0.96 5/16 - 18 x 0.87
DV112..
3)
AD4/P DV132.. 13.58 11.46 4.49 6.69 8.27 5.91 8.27 8.82 3.11 1.375 3.14 0.35 2.76 1.51 0.3125 1/2 - 13 x 1.12
1)
Column can project beyond the foot mounting surface, depending on the setting.
2)
Motor mounting platform can project beyond the foot mounting surface.
3)
Motor mounting platform can collide with the gear unit flange, depending on the setting.
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
AF VK QD
max
DH
DH min
FU
0˚
PC
DB
180˚
D
DG
DM max
CC
0˚ 180˚
FV
FZ FP FO
KF..
FY
FU
KAF..
FM TAP
VK AF PC DG DH DH DM DM
min max min max CC QD FU FV FO FP FY FZ FM TAP
DT71D
AD2/P DT80.. 7.68 7.09 2.56 10.24 6.69 7.87 4.37 1.69 0.750 1.57 0.25 1.26 0.83 0.1875 1/4 - 20 x 0.63
DT90.. 7.09
DV100..
K..87 AD3/P 9.06 9.45 9.84 3.54 9.06 6.89 9.06 6.14 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112..
1)
AD4/P DV132.. 13.58 11.46 4.49 11.02 7.09 8.27 8.62 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
DV160..1), 3) 7.48 2.76
AD5/P 1), 3) 16.93 13.98 6.02 9.84 7.28 9.84 11.50 4.45 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
DV180..
DT90..
AD3/P DV100.. 9.06 9.45 3.54 8.27 12.60 8.27 12.60 5.94 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112..
K..97 11.81
AD4/P DV132.. 13.58 11.46 4.49 8.46 11.02 11.02 8.43 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
DV160..1), 3) 8.46 2.76
AD5/P 16.93 13.98 6.02 8.86 12.80 9.84 11.30 4.45 1.625 4.33 0.58 1.79 0.375 5/8 - 11 x 1.38
DV180..1), 3)
DV100..
AD3/P 9.06 9.45 3.54 10.24 12.60 12.60 5.71 2.52 1.125 2.36 0.32 1.97 1.24 0.25 3/8 - 16 x 0.87
DV112.. 8.66
AD4/P DV132.. 13.58 11.46 4.49 10.43 14.17 11.02 8.19 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
K..107 DV160.. 13.78 2.76
AD5/P 16.93 13.98 6.02 12.80 8.86 12.80 11.06 4.45 1.625 0.58 1.79 0.375
DV180..
3) 10.63 4.33 5/8 - 11 x 1.38
DV200..
AD6/P 19.49 17.99 6.42 12.20 9.84 12.20 12.64 4.49 1.875 0.64 3.15 2.09 0.50
DV225..3)
AD4/P DV132.. 13.58 11.46 4.49 12.01 14.17 9.65 11.02 7.60 3.11 1.375 3.14 0.35 1.51 0.3125 1/2 - 13 x 1.12
DV160.. 2.76
AD5/P 16.93 13.98 6.02 12.20 15.94 10.04 12.80 10.47 4.45 1.625 0.58 1.79 0.375
DV180..
3) 5/8 - 11 x 1.38
K..127 DV200.. 17.72
AD6/P 3) 19.49 17.99 6.42 14.17 11.81 14.17 12.05 4.49 1.875 4.33 3.15 2.09
DV225..
3) 12.01 0.64 0.50
D250..
AD7/P 3) 25.59 22.44 6.69 14.37 12.01 14.37 11.81 4.41 2.125 3.54 2.35 3/4 - 10 x 1.61
D280..
1)
Column can project beyond the foot mounting surface, depending on the setting.
2)
Motor mounting platform can project beyond the foot mounting surface.
3)
Motor mounting platform can collide with the gear unit flange, depending on the setting.
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
270˚ FV
AF VK QD
max
DH
DH min
FU
0˚
PC
DB
180˚
D
DG
DM max
CC
0˚ 180˚
FV
FZ FP FO
KF..
FY
FU
KAF..
FM TAP
VK AF PC DG DH DH DM DM CC QD FU FV FO FP FY FZ FM TAP
min max min max
DV160..
AD5/P 16.93 13.98 6.02 14.17 15.94 11.61 12.80 10.16 4.45 1.625 0.58 2.76 1.79 0.375
DV180..
3) 5/8 - 11 x 1.38
DV200..
K..157 AD6/P 19.49 17.99 21.65 6.42 11.73 4.49 1.875 4.33 3.15 2.09
DV225..3)
14.76 18.70 14.76 18.70 0.64 0.50
D250..3)
AD7/P 25.59 22.44 6.69 11.50 4.41 2.125 3.54 2.35 3/4 - 10 x 1.61
D280..3)
DV160..
AD5/P 16.93 13.98 6.02 16.34 19.49 13.78 15.94 10.16 4.45 1.625 0.58 2.76 1.79 0.375
DV180..
5/8 - 11 x 1.38
DV200..
K..167 AD6/P 19.49 17.99 21.65 6.42 11.73 4.49 1.875 4.33 3.15 2.09
DV225..
16.54 18.70 14.76 18.70 0.64 0.50
D250..
AD7/P 25.59 22.44 6.69 11.50 4.41 2.125 3.54 2.35 3/4 - 10 x 1.61
D280..
DV160..
AD5/P 16.93 13.98 6.02 18.90 21.46 19.49 10.16 4.45 1.625 0.58 2.76 1.79 0.375
DV180..
5/8 - 11 x 1.38
DV200..
K..187 AD6/P 19.49 17.99 21.65 6.42 14.96 11.73 4.49 1.875 4.33 3.15 2.09
DV225..
19.09 20.67 18.70 0.64 0.50
D250..
AD7/P 25.59 22.44 6.69 11.50 4.41 2.125 3.54 2.35 3/4 - 10 x 1.61
D280..
1)
Column can project beyond the foot mounting surface, depending on the setting.
2)
Motor mounting platform can project beyond the foot mounting surface.
3)
Motor mounting platform can collide with the gear unit flange, depending on the setting.
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
*
*
+0
-0.007
Dimensions
Bore sizes Symmetrical Non symmetrical
Model D D
mm inch EA EH ES EA EH ES
KT 37 30 1 1.1875 1.25 3.94 7.60 7.93 2.99 6.65 6.99
KT 47 35 1.1875 1.25 1.375 1.4375 4.65 9.09 9.29 3.66 8.11 8.31
KT 57 40 1.375 1.4375 1.5 1.625 5.30 10.33 10.53 4.04 9.07 9.27
KT 67 40 1.375 1.4375 1.5 1.625 5.57 10.85 11.06 4.31 9.59 9.80
KT 77 50 1.625 1.75 1.9375 2 6.75 13.21 13.56 5.02 11.48 11.83
KT 87 65 1.9375 2 2.375 2.4375 7.80 15.24 15.55 5.71 13.15 13.46
KT 97 75 2.4375 2.75 2.9375 9.09 17.76 18.07 6.89 15.55 15.87
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Please consult your SEW-Eurodrive Assembly Center for additional speed (RPM) selections and dimension pages not listed.
Notes
S37..
C
2.48-0.02 3.15
3.90 ZC
0.71 GA1
0.94 3.94 3.94
Z
ø 0.750*
ø 4.72
0.71
BD1
3.86
AK1
AJ1
1.57 3.15
5.63
3.15-0.02
ø 0.35
0.39
FU
ø 0.750*
0.19 1.06 0.25
2.24
3.54
0.83
1/4 - 20 x 0.63
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 4.72
ø 0.26
0.12
Z
ø 3.15*
94
ø 4.72
ø 3.
BD1
AK1
AJ1
5.16
ø 0.750*
3.23 0.39 1.57
ø 0.35
ZE BB1 0.14
AA
BF1
ø 4.33*
12
ø 6.30
ø 5.
ø 0.750*
FY
FZ
1.57
ø 0.750*
0.19 1.06 0.25
FU
0.83
1/4 - 20 x 0.63
SAF37.. SHF37..
2.46 2.36 0.59 2.46 2.36 0.59 3.43 2.36 0.59 3.43 2.36 0.59
ø 6.30
ø 2.09
ø 4.72
ø 2.09
ø 4.72
ø 6.30
ø 20mm*
2.36 2.36 3.11 2.36
ø 1.38
0.19
ø 20mm*
ø 1.38
0.84
ø 0.750*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 4.72
3.15 2.24 2.24 0.39
Z
.95
ø 3.54
AJ1
BD1
AK1
ø2
5.16
4.33
3.23
2.60
M6
3
.8
BB1
R0
4.41 AA 1.02
ZE
0.31
BF1
0.41±0.004
1.22
FY
1.42-0.01
FZ
FU
ø 2.09
ø 20mm*
2.36 2.36 3.11 2.36
ø 1.38
0.19
ø 20mm*
ø 1.38
0.84
ø 0.750*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
S47..
C
2.95-0.02 3.78 ZC 4.53 4.53
GA1
0.47 2.36
ø 4.72
Z
0.98
0.31
AJ1
BD1
AK1
6.50
4.13
3.15
3.94-0.02
ø 1.000*
ø 0.43
1.38
0.59
3.15
4.41
ZE
1.97
BF1
FY
ø 1.000*
FZ
3/8 - 16 x 0.87
FU
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
SF47..
2.26 5.26
C
0.39 1.97
6.73
ZC 0.14
ø 0.35
GA1
ø 4.72
Z
ø 6.30
2
ø 4.33*
ø 5.1
AJ1
BD1
7.05
AK1
3.94
ø 1.000*
0.31
ZE
BB1
1.97
BF1
AA
Z
0.25 1.31 0.32
FY
1.11
FZ
ø 1.000*
FU
L 3/8 - 16 x 0.87
ø 2.95
ø 6.30
ø 6.30
ø 30mm*
0.25 2.36 2.36 3.39 2.36
1.37
ø 30mm*
ø 1.77
ø 1.77
ø 1.250*
1.22 0.79
7/16 - 14 x 1 0.67
ø 30mm*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 4.72
Z S..47/T.. M8 x 0.98
2.26 0.59
.53
ø 5.12
AJ1 ø4
7.05
BD1
AK1
3.94
0.31
2.64
5.12
BB1 ZE
5.00
0.16
0.79
AA
BF1
M10 Z
3
X
.8
R0
M8 FY
0.81
FZ
0.47
FU
L
0.41±0.004
2.36
3.70
1.22
1.42-0.01
2.05
1.38
ø 2.95
ø 30mm*
0.25 2.36 2.36 3.39 2.36
1.37
ø 30mm*
ø 1.77
ø 1.77
ø 1.250*
1.22 0.79
7/16 - 14 x 1 0.67
ø 30mm*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
3.78 GA1
Z
ø 3.74*
ø 4.72
Z FY
.53
ø 5.12
FZ
ø4
AJ1
BD1
AK1
7.05
3.94
FU
0.31
L
Y
2.64
BB1
5.00
AA
Y
ø 3.74*
ø 0.35
0.33
M8
0.12
0.43
0.47
ø 2.95
ø 30mm*
0.25 2.36 2.36 3.39 2.36
1.37
ø 30mm*
ø 1.77
ø 1.77
ø 1.250*
1.22 0.79
7/16 - 14 x 1 0.67
ø 30mm*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
S57..
C
3.15-0.02 4.21 ZC
5.28 5.28
GA1
0.47 2.80
ø 4.72
Z
1.18
0.79
AJ1
BD1
AK1
7.44
3.94
5.12
4.41-0.02
ø 1.250*
ø 0.43
1.38
0.59
ZE
2.36
Z
BF1
FY
ø 1.250*
FZ
1/2 - 13 x 1.12
FU
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
SF57..
2.83 6.30
C
0.47 2.36
7.36 ZC
ø 0.43 4.21 0.14
GA1
ø 4.72
Z
ø 7.87
0
ø 5.12*
ø 6.5
AJ1
BD1
AK1
7.44
4.41
ø 1.250*
0.79
ZE
BB1
AA 2.36
BF1
Z 0.25 1.69 0.26
FY
1.36
FZ
ø 1.250*
FU
1/2 - 13 x 1.12
L
ø 7.87
ø 3.27
ø 7.87
ø 35mm*
0.31 2.95 2.95 4.02 2.95
1.52
ø 35mm*
ø 1.97
ø 1.97
ø 1.375*
1.26 0.79
7/16 - 14 x 1 0.65
ø 35mm*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 4.72
Z S..57/T.. M8 x 0.98
2.83 0.59
ø 4.72
AJ1
BD1
AK1
7.44
4.41
0.79
2.87
6.30
BB1 ZE
5.75
0.16
0.79
AA
BF1
M10
Z
3
X
.8
R0
M8 0.73
FY
45˚
45˚
0.47
FZ
45˚
X
FU
.02
ø4 L
0.41±0.004
35˚
35˚
2.36
3.94
1.22
55 ˚
˚ 55
ø 3.27
ø 35mm*
0.31 2.95 2.95 4.02 2.95
1.52
ø 35mm*
ø 1.97
ø 1.97
ø 1.375*
1.26 0.79
7/16 - 14 x 1 0.65
ø 35mm*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
BF1
4.21 Z
45˚ GA1
ø 3.15*
ø 4.72
Z FY
ø 4.72
.02
FZ
ø4
AJ1
BD1
AK1
7.44
4.41
FU
0.79
L
Y
2.87
BB1
5.75
AA
Y
ø 3.15*
ø 0.35
0.31
M8
0.12
0.43
0.47
ø 3.27
ø 35mm*
0.31 2.95 2.95 4.02 2.95
1.52
ø 35mm*
ø 1.97
ø 1.97
ø 1.375*
1.26 0.79
7/16 - 14 x 1 0.65
ø 35mm*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
S67..
C AM56-145
4.17-0.02 5.31 6.30 6.30
GA1
0.59 3.37
ø 6.30
Z
1.57
0.87
AJ1
BD1
AK1
9.29
6.69
5.12
5.51-0.02
ø 1.375*
ø 0.53
1.57
0.79
ZE
2.76
BF1
FY
ø 1.375*
FZ
1/2 - 13 x 1.12
FU
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
S67..
C AM182-365
4.17-0.02 5.31 6.30 6.30
GA1
0.59 3.37
ø 6.30
1.57
Z
0.87
1
BD1
AK1
AJ
9.29
6.69
5.12
5.51-0.02
ø 1.375*
ø 0.53
1.57
0.79
ZE
2.76
BF1
FY
ø 1.375*
FZ
1/2 - 13 x 1.12
FU
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
Z
ø 7.87
0
ø 5.12*
ø 6.5
AJ1
BD1
AK1
9.29
5.51
ø 1.375*
0.87
ZE
BB1
2.76
BF1
Z AA
0.31 1.81 0.43
FY
1.51
FZ
ø 1.375*
FU
L 1/2 - 13 x 1.12
ø 7.87
ø 3.66
ø 7.87
ø 40mm*
0.38 3.31 3.31 4.41 3.31
1.67
ø 40mm*
ø 2.56
ø 2.56
ø 1.500*
1.50 0.79
5/8 - 11 x 1-3/4 1.36
ø 40mm*
*Refer to page 101 for tolerance information Refer to page 94 for Alternate Shafts
Dimensions subject to change without notice See page 99 for Compound Reducer Information
ø 6.30
Z
ø 7.87
0
ø 5.12*
ø 6.5
BD1
AK1
9.29
1
AJ
5.51
ø 1.375*
0.87
ZE
BB1
2.76
BF1
Z AA
0.31 1.81 0.43
FY
1.51
FZ
ø 1.375*
FU
L 1/2 - 13 x 1.12
ø 7.87
ø 3.66
ø 7.87
ø 40mm*
0.38 3.31 3.31 4.41 3.31
1.67
ø 40mm*
ø 2.56
ø 2.56
ø 1.500*
1.50 0.79
5/8 - 11 x 1-3/4 1.36