Professional Documents
Culture Documents
Post Test
Post Test
IDENTIFICATION
1. A type of chain drives that is usually made of malleable cast iron and operates at a slow speed of
about 0.8 to 3m/s.
2. It is used for the transmission of mechanical power when the distance between the centers of
shaft is short.
3. What are the 2 types of conveyor chain?
4. This type of chain was used in the initial stage of development in power transmission.
5. A type of chain which is designed to eliminate the bad effects caused by stretching and to create
noiseless walking and also known as an inverted tooth chain.
8. TRUE or FALSE. Closed joint type chain is used in a conveyor where the length between power
transmissions is short.
14. This type of chain consists of a barrel and link and is made into a single casting, then the chain is
heat-treated to provide high strength.
15. It is a device for raising or lowering a load using a drum or a lifting wheel around which a rope or
chain is wound.
KEY ANSWERS
1. Conveyor Chain
2. Power transmission chains
3. Detachable or hook joint type chain and Closed joint type chain
4. Block Or Bush Chain
5. Silent Chain
d. Compact design
f. Durability
8. FALSE
Loading,
Chain speed
Shaft layout
Service environment
Lubrication
13.TRUE
15. Hoist